Contact us to receive an offer.
| Manufacturer | STERIL |
|---|---|
| Model | DOWN CROSS |
| Year | |
| Location | Italy
|
This STERIL DOWN CROSS is a vertical laminar flow hood constructed from AISI 304 stainless steel, featuring a self-supporting structure with press-bent sheets and approximately 3 mm curvature radii. It is designed for use in sectors such as pharmaceutical, chemical, cosmetics, food, dietary, medical devices, and manufacturing industries. The hood is intended to reduce dust during sampling or dispensing operations and is suitable for handling and dosing both sterile and non-sterile products, including excipients and active ingredients. The operator is fully protected under laminar air flow (LAF).
The Down-Cross system provides vertical or horizontal laminar airflow in ISO class 5 conditions for particles sized 0.5 and 5 microns, measured "at rest" according to ISO 14644-1 standards. The intake section includes a double pre-filtration stage located on the vertical back wall. Inside the cabin, a partial recirculation of treated air occurs, with a portion of air expelled into the surrounding environment after passing through absolute filtration. This operating cycle maintains a slight negative pressure, confining the dispensing area relative to the surrounding environment.
The blower section is equipped with double inlet centrifugal motor fans, with ATEX certification available upon request. The upper filtering section is protected by a grid or micro-perforated diffusion mesh made of stainless steel. Integrated LED lighting is recessed within the filtering ceiling, providing illumination of 500 LUX with an IP67 protection rating.
The unit includes a large stainless steel panel with multiple compartments and ventilation grilles at the bottom. Two round analog gauges are mounted on the panel, along with a control panel featuring buttons and a red emergency stop switch labeled "STERIL." The panel surfaces are clean, reflective, and free from visible damage.
A transparent plastic strip curtain partially covers the front of the stainless steel panel. The plastic strips show signs of dirt, wear, and visible scratches. The surrounding environment includes walls with windows and electrical outlets nearby.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
DESCRIPTION:
Vertical laminar flow hood in stainless steel.
SECTORS OF USE:
Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing.
MAIN FEATURES:
Down-Cross hoods are used to reduce dust for sampling or dispensing operations. The Down-Cross system in question is suitable for the handling and dosing of sterile and non-sterile products (excipients or active ingredients) with the operator fully under LAF (Laminar Air Flow). The Down-Cross hood provides a vertical or horizontal laminar air flow in ISO class 5 on particles of 0.5 and 5 microns in "at rest" conditions according to the ISO 14644-1 standard with an intake section complete with a double pre-filtration stage located on the vertical back wall. In the cabin there is a partial recirculation of the treated air with a portion of air that is expelled into the surrounding environment after appropriate absolute filtration. The operating cycle described guarantees a slight depression which determines a confinement of the dispensing area with respect to the surrounding environments. The cabin is made up of a self-supporting structure in “scotch brite” satin or mirror polished AISI 304 stainless steel. The sheets are press-bent with curvature radii of approximately 3 mm. The blower section includes double inlet centrifugal motor fans, ATEX on request. The upper filtering section is protected by a grid or a micro-perforated diffusion mesh made of AISI 304 stainless steel. The lighting system is completely integrated into the filtering ceiling and is guaranteed by LED lamps, installed "recessed" with lighting equal to 500 LUX and relative protection degree IP 67.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of equipment is this STERILE MOD. DOWN CROSS?
This STERILE MOD. DOWN CROSS is a vertical laminar flow hood.
What are the dimensions of the equipment?
This equipment has approximate dimensions of 3500 mm x 1500 mm x 2300 mm.
Is this STERILE MOD. DOWN CROSS a used machine?
This STERILE MOD. DOWN CROSS is a used machine.
What is the reference name for this vertical laminar flow hood?
This vertical laminar flow hood is referenced as CAP-28.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 1275 |
| Last activity | Nov. 1, 2026 |
DESCRIPTION:
Vertical laminar flow hood in stainless steel.
SECTORS OF USE:
Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing.
MAIN FEATURES:
Down-Cross hoods are used to reduce dust for sampling or dispensing operations. The Down-Cross system in question is suitable for the handling and dosing of sterile and non-sterile products (excipients or active ingredients) with the operator fully under LAF (Laminar Air Flow). The Down-Cross hood provides a vertical or horizontal laminar air flow in ISO class 5 on particles of 0.5 and 5 microns in "at rest" conditions according to the ISO 14644-1 standard with an intake section complete with a double pre-filtration stage located on the vertical back wall. In the cabin there is a partial recirculation of the treated air with a portion of air that is expelled into the surrounding environment after appropriate absolute filtration. The operating cycle described guarantees a slight depression which determines a confinement of the dispensing area with respect to the surrounding environments. The cabin is made up of a self-supporting structure in “scotch brite” satin or mirror polished AISI 304 stainless steel. The sheets are press-bent with curvature radii of approximately 3 mm. The blower section includes double inlet centrifugal motor fans, ATEX on request. The upper filtering section is protected by a grid or a micro-perforated diffusion mesh made of AISI 304 stainless steel. The lighting system is completely integrated into the filtering ceiling and is guaranteed by LED lamps, installed "recessed" with lighting equal to 500 LUX and relative protection degree IP 67.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of equipment is this STERILE MOD. DOWN CROSS?
This STERILE MOD. DOWN CROSS is a vertical laminar flow hood.
What are the dimensions of the equipment?
This equipment has approximate dimensions of 3500 mm x 1500 mm x 2300 mm.
Is this STERILE MOD. DOWN CROSS a used machine?
This STERILE MOD. DOWN CROSS is a used machine.
What is the reference name for this vertical laminar flow hood?
This vertical laminar flow hood is referenced as CAP-28.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This STERIL DOWN CROSS is a vertical laminar flow hood constructed from AISI 304 stainless steel, featuring a self-supporting structure with press-bent sheets and approximately 3 mm curvature radii. It is designed for use in sectors such as pharmaceutical, chemical, cosmetics, food, dietary, medical devices, and manufacturing industries. The hood is intended to reduce dust during sampling or dispensing operations and is suitable for handling and dosing both sterile and non-sterile products, including excipients and active ingredients. The operator is fully protected under laminar air flow (LAF).
The Down-Cross system provides vertical or horizontal laminar airflow in ISO class 5 conditions for particles sized 0.5 and 5 microns, measured "at rest" according to ISO 14644-1 standards. The intake section includes a double pre-filtration stage located on the vertical back wall. Inside the cabin, a partial recirculation of treated air occurs, with a portion of air expelled into the surrounding environment after passing through absolute filtration. This operating cycle maintains a slight negative pressure, confining the dispensing area relative to the surrounding environment.
The blower section is equipped with double inlet centrifugal motor fans, with ATEX certification available upon request. The upper filtering section is protected by a grid or micro-perforated diffusion mesh made of stainless steel. Integrated LED lighting is recessed within the filtering ceiling, providing illumination of 500 LUX with an IP67 protection rating.
The unit includes a large stainless steel panel with multiple compartments and ventilation grilles at the bottom. Two round analog gauges are mounted on the panel, along with a control panel featuring buttons and a red emergency stop switch labeled "STERIL." The panel surfaces are clean, reflective, and free from visible damage.
A transparent plastic strip curtain partially covers the front of the stainless steel panel. The plastic strips show signs of dirt, wear, and visible scratches. The surrounding environment includes walls with windows and electrical outlets nearby.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 1275 |
| Last activity | Nov. 1, 2026 |
СТЕРИЛЕН МОД. DOWN CROSS - използван вертикален капак с ламинарен поток
STERIL MOD. DOWN CROSS - Používá se vertikální digestoř s laminárním prouděním
STERIL MOD. DOWN CROSS - Vertikal laminar flow hætte brugt
STERIL-MOD. DOWN CROSS – Vertikale Laminar-Flow-Haube verwendet
STERIL MOD. DOWN CROSS - Χρησιμοποιείται κουκούλα κάθετης στρωτής ροής
STERIL MOD. DOWN CROSS - Vertical laminar flow hood used
MODO ESTERIL. DOWN CROSS - Campana de flujo laminar vertical usada
STÉRILE MOD. DOWN CROSS - Hotte à flux laminaire vertical d'occasion
STERILNO MOD. DOWN CROSS - Koristi se vertikalna napa s laminarnim protokom
STERIL MOD. DOWN CROSS - Függőleges lamináris áramlású burkolat használt
STERILE MOD. DOWN CROSS - Cappa a flusso laminare verticale utilizzata
STERILUS MOD. DOWN CROSS - Naudotas vertikalus laminarinio srauto gaubtas
STERILE MOD. DOWN CROSS - Verticale laminaire stromingskap gebruikt
STERYLNY MOD. KRZYŻ W DÓŁ - Zastosowano pionowy kaptur z przepływem laminarnym
ESTÉRIL MOD. DOWN CROSS - Capela de fluxo laminar vertical usada
STERIL MOD. DOWN CROSS - Hotă cu flux laminar vertical utilizată
СТЕРИЛЬНЫЙ МОД. DOWN CROSS — используется вытяжной шкаф с вертикальным ламинарным потоком
STERIL MOD. DOVN CROSS - Korišćena hauba sa vertikalnim laminarnim protokom
STERIL MOD. DOWN CROSS - Vertikal laminärt flödeshuv används
STERİL MOD. AŞAĞI ÇAPRAZ - Kullanılan dikey laminer akış başlığı
EN
- Languages
English (GB)