Contact us to receive an offer.
| Manufacturer | Steko |
|---|---|
| Model | 228 P.B.S. Pressen - Schleifen - Sägen |
| Year | |
| Location | Germany
|
Combined woodworking machine Steko 228 P.B.S. for pressing, sanding and sawing. The machine is used and is identified on its labels as STEKO-228 PBS; Hiller branding is also present. It includes a pneumatic veneer press with electric heating, a long-belt sander, a sliding-table/veneer/edging saw, and extraction for the sander and saw.
The press has aluminium heating plates measuring 2280 x 1000 mm (working surface), with an extendable lower plate and an opening width of approximately 145 mm. Total pressing pressure is 40 tons, with a maximum specific pressing pressure of 2 kg/cm². Heating is provided by two 1.8 kW elements.
The long-belt sander has a 3 kW motor and an extendable table with a 2600 x 750 mm working surface. Sanding height is 200 mm. The belt measures 6800 mm long and 120–150 mm wide, with left/right rotation and a speed of 19 m/s.
The saw has a 2.2 kW motor, pneumatic pressure beam, chain feed, and adjustable cutting height of 0–60 mm. Cutting length is approximately 2600 mm; maximum saw-blade diameter is 250 mm. The extraction unit is rated at 0.55 kW with an approximate delivery rate of 11 m³/min.
The machine has push-button controls, indicator lights, and emergency-stop controls. A fabric dust-collection bag is fitted. Visible painted surfaces show signs of use. Transport dimensions are approximately 3900 x 2100 x 1400 mm (L x W x H), and weight is approximately 2500 kg. The machine is described as mounted on a trolley; it is currently shown supported on wooden blocks.
Sold as is. Technical details, condition, year of construction and scope of delivery are stated according to the manufacturer's brochure or previous owner and are not guaranteed. On-site inspection is possible and recommended by appointment. Prices exclude VAT; payment is due before collection or dispatch. Delivery is ex warehouse. Seller's general terms and conditions apply.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Combined machine Steko 228 P.B.S. Pressing - Sanding - Sawing
Used
- Pneumatic veneer press with electric heating
Aluminium heating plates 2280 x 1000 mm LW
Lower plate extendable
Opening width approx. 145 mm
Total pressing pressure 40 tons, specific pressing pressure max. 2 kg/cm2
Heating 2x 1,8 kW
- Long belt sander
3 kW
Table 2600 x 750 mm LW, extendable
Sanding height 200 mm
Belt length 6800 mm
Belt width 120 - 150 mm
Left/right rotation, speed 19 m/s
- Sliding table saw / veneer saw / edging saw
2.2 kW
With pneumatic pressure beam
Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm
Saw blade diameter max. 250 mm
With chain feed
- Extraction for sander and saw
0.55 kW
Delivery rate approx. 11 m3/min
Push-button control with main and emergency stop switches
Machine on trolley
Installation footprint according to manufacturer 7.5 m2
Transport dimensions approx. 3900 x 2100 x 1400 mm LWH
Weight approx. 2500 kg
To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment
Sold as is
Technical details, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee
Subject to prior sale
For used machines, any warranty is excluded, the following applies: “sold as seen”
Terms of payment: Prices excl. VAT, payment before collection or dispatch
Terms of delivery: ex warehouse
Our general terms and conditions apply, available on the Internet at
Please pay particular attention to Article 9 regarding complaints and returns!
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 16 |
| Last activity | Nov. 6, 2026 |
Combined machine Steko 228 P.B.S. Pressing - Sanding - Sawing
Used
- Pneumatic veneer press with electric heating
Aluminium heating plates 2280 x 1000 mm LW
Lower plate extendable
Opening width approx. 145 mm
Total pressing pressure 40 tons, specific pressing pressure max. 2 kg/cm2
Heating 2x 1,8 kW
- Long belt sander
3 kW
Table 2600 x 750 mm LW, extendable
Sanding height 200 mm
Belt length 6800 mm
Belt width 120 - 150 mm
Left/right rotation, speed 19 m/s
- Sliding table saw / veneer saw / edging saw
2.2 kW
With pneumatic pressure beam
Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm
Saw blade diameter max. 250 mm
With chain feed
- Extraction for sander and saw
0.55 kW
Delivery rate approx. 11 m3/min
Push-button control with main and emergency stop switches
Machine on trolley
Installation footprint according to manufacturer 7.5 m2
Transport dimensions approx. 3900 x 2100 x 1400 mm LWH
Weight approx. 2500 kg
To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment
Sold as is
Technical details, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee
Subject to prior sale
For used machines, any warranty is excluded, the following applies: “sold as seen”
Terms of payment: Prices excl. VAT, payment before collection or dispatch
Terms of delivery: ex warehouse
Our general terms and conditions apply, available on the Internet at
Please pay particular attention to Article 9 regarding complaints and returns!
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Combined woodworking machine Steko 228 P.B.S. for pressing, sanding and sawing. The machine is used and is identified on its labels as STEKO-228 PBS; Hiller branding is also present. It includes a pneumatic veneer press with electric heating, a long-belt sander, a sliding-table/veneer/edging saw, and extraction for the sander and saw.
The press has aluminium heating plates measuring 2280 x 1000 mm (working surface), with an extendable lower plate and an opening width of approximately 145 mm. Total pressing pressure is 40 tons, with a maximum specific pressing pressure of 2 kg/cm². Heating is provided by two 1.8 kW elements.
The long-belt sander has a 3 kW motor and an extendable table with a 2600 x 750 mm working surface. Sanding height is 200 mm. The belt measures 6800 mm long and 120–150 mm wide, with left/right rotation and a speed of 19 m/s.
The saw has a 2.2 kW motor, pneumatic pressure beam, chain feed, and adjustable cutting height of 0–60 mm. Cutting length is approximately 2600 mm; maximum saw-blade diameter is 250 mm. The extraction unit is rated at 0.55 kW with an approximate delivery rate of 11 m³/min.
The machine has push-button controls, indicator lights, and emergency-stop controls. A fabric dust-collection bag is fitted. Visible painted surfaces show signs of use. Transport dimensions are approximately 3900 x 2100 x 1400 mm (L x W x H), and weight is approximately 2500 kg. The machine is described as mounted on a trolley; it is currently shown supported on wooden blocks.
Sold as is. Technical details, condition, year of construction and scope of delivery are stated according to the manufacturer's brochure or previous owner and are not guaranteed. On-site inspection is possible and recommended by appointment. Prices exclude VAT; payment is due before collection or dispatch. Delivery is ex warehouse. Seller's general terms and conditions apply.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 16 |
| Last activity | Nov. 6, 2026 |
Комбинирана дървообработваща машина Steko 228 P.B.S. Pressen - Schleifen - Sägen
Kombinovaný dřevoobráběcí stroj Steko 228 P.B.S. Pressen - Schleifen - Sägen
Steko 228 P.B.S. Pressen - Schleifen - Sägen Kombineret træbearbejdningsmaskine
Steko 228 P.B.S. Pressen - Schleifen - Sägen Kombinierte Holzbearbeitungsmaschine
Συνδυασμένη μηχανή ξύλου Steko 228 P.B.S. Pressen - Schleifen - Sägen
Steko 228 P.B.S. Pressen - Schleifen - Sägen Wood combined machine
Máquina combinada para madera Steko 228 P.B.S. Pressen - Schleifen - Sägen
Machine combinée à bois Steko 228 P.B.S. Pressen - Schleifen - Sägen
Kombinirani drvnoobradni stroj Steko 228 P.B.S. Pressen - Schleifen - Sägen
Steko 228 P.B.S. Pressen - Schleifen - Sägen Kombinált faipari gép
Macchina combinata per legno Steko 228 P.B.S. Pressen - Schleifen - Sägen
Steko 228 P.B.S. Pressen - Schleifen - Sägen Kombinuotos medienos apdirbimo staklės
Steko 228 P.B.S. Pressen - Schleifen - Sägen Gecombineerde houtbewerkingsmachine
Maszyna kombinowana do drewna Steko 228 P.B.S. Pressen - Schleifen - Sägen
Máquina combinada para madeira Steko 228 P.B.S. Pressen - Schleifen - Sägen
Mașină combinată pentru lemn Steko 228 P.B.S. Pressen - Schleifen - Sägen
Steko 228 P.B.S. Pressen - Schleifen - Sägen Комбинированный деревообрабатывающий станок
Kombinovana mašina za drvo Steko 228 P.B.S. Pressen - Schleifen - Sägen
Steko 228 P.B.S. Pressen - Schleifen - Sägen Kombimaskin för trä
Kombine ahşap işleme makinesi Steko 228 P.B.S. Pressen - Schleifen - Sägen
EN
- Languages
English (GB)