Contact us to receive an offer.
| Category | Machining centers - vertical |
| Axis X | 520 mm |
| Axis Y | 360 mm |
| Axis Z | 360 mm |
| Rotary table (4th axis) | no |
| Type of CNC | |
| Table length | 700 mm |
| Table width | 350 mm |
| Max. part weight | 5 kg |
| Number of tool pockets | 21 |
| Spindle taper | hska 63 |
| Max. spindle speed | 12000 rpm |
| Spindle motor power | 18.5 kW |
| Length x width x height | 3200.0 × 3250.0 × 3245.0 |
| Weight | 5300 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Stama MC326TWIN |
| Last availability date | 09/09/2026 |
| Product id | P260212459 |
| Language |
This STAMA MC326TWIN vertical machining center, manufactured in 2011, features a dual-spindle and dual-table configuration designed for efficient simultaneous machining. It operates with a total of 4 axes, providing precise control over complex machining tasks. The machine's dimensions are 3200 mm in length, 3250 mm in width, and 3245 mm in height, with a weight of 5300 kg.
Each of the two tables measures 700 mm in length and 350 mm in width, equipped with 2 T-slots each, with a T-slot width of 14H12 mm. The maximum weight capacity on each table is 450 kg, and the maximum part weight is 5 kg. The travel distances are 520 mm along the X-axis, 360 mm along the Y-axis, and 360 mm along the Z-axis.
The machine is equipped with two spindles featuring HSK-A 63 taper connections, spaced 266 mm apart. The spindle speed ranges from 36 rpm up to 12,000 rpm, powered by an 18.5 kW spindle motor. The distance between the spindle connection and table ranges from 200 mm to 560 mm. Rapid traverse speed reaches up to 60 m/min.
The tool changer includes 2 magazines with 21 tool pockets each, supporting tools up to 88 mm in diameter, or up to 125 mm diameter with free space, with a maximum tool length of 300 mm and maximum tool weight of 5 kg. The average chip-to-chip time is approximately 2.4 seconds.
Additional features include coolant nozzles positioned above the tool turret and along the interior walls, enhancing machining cooling and chip removal. The machine has a control panel located on the left side and is fitted with a signal tower light with red, yellow, and green indicators for operational status.
The machine's exterior is clean and well-maintained with minor wear, while the interior shows some wear with metal shavings present and some paint chipping and residue on base and internal surfaces. Some rust and residue are visible around spindle faces and interior walls. Hydraulic or pneumatic lines and cylinders are connected to the tool holders and tool changer mechanism, indicating integrated fluid power systems for tool operation.
Electrical requirements include a 50 Hz, 3-phase 400V connection, with a total installed power of 40 kVA. Compressed air connection is rated at 6 bar.
This machining center is suitable for workshops requiring a versatile, dual-spindle machine with multiple tool capacity and moderate table size for high-precision vertical machining operations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Machining center Total number of axes: 4. Number of tables: 2. Number of spindles: 2. Table length: 700 mm. Table width: 350 mm. Number of T-slots: 2.
T-slot width: 14H12 mm. Max. weight on table: 450 kg. Travel: Longitudinal (X-axis): 520 mm – Transverse (Y-axis): 360 mm – Vertical (Z-axis): 360 mm
Tool changer: Number of tools: 2 x 21 Maximum tool diameter: 88 mm Maximum diameter with free space: 125 mm Maximum tool length: 300 mm Maximum tool weight: 5 kg Average time from chip to chip: 2.4 sec
Spindle taper connection: HSK-A: 63. Distance between spindle connection and table: 200 – 560 mm. Distance between spindles: 266 mm. Spindle speed: from 36 rpm to 12,000 rpm.
Rapid traverse: 60 m/min. Compressed air connection: 6 bar. 50 Hz 3x connection: 400 volts. Spindle motor: 18.5 kW. Total installed power: 40 kVA
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2013 |
| Offers online | 47 |
| Last activity | Nov. 13, 2026 |
Machining center Total number of axes: 4. Number of tables: 2. Number of spindles: 2. Table length: 700 mm. Table width: 350 mm. Number of T-slots: 2.
T-slot width: 14H12 mm. Max. weight on table: 450 kg. Travel: Longitudinal (X-axis): 520 mm – Transverse (Y-axis): 360 mm – Vertical (Z-axis): 360 mm
Tool changer: Number of tools: 2 x 21 Maximum tool diameter: 88 mm Maximum diameter with free space: 125 mm Maximum tool length: 300 mm Maximum tool weight: 5 kg Average time from chip to chip: 2.4 sec
Spindle taper connection: HSK-A: 63. Distance between spindle connection and table: 200 – 560 mm. Distance between spindles: 266 mm. Spindle speed: from 36 rpm to 12,000 rpm.
Rapid traverse: 60 m/min. Compressed air connection: 6 bar. 50 Hz 3x connection: 400 volts. Spindle motor: 18.5 kW. Total installed power: 40 kVA
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Machining centers - vertical |
| Axis X | 520 mm |
| Axis Y | 360 mm |
| Axis Z | 360 mm |
| Rotary table (4th axis) | no |
| Type of CNC | |
| Table length | 700 mm |
| Table width | 350 mm |
| Max. part weight | 5 kg |
| Number of tool pockets | 21 |
| Spindle taper | hska 63 |
| Max. spindle speed | 12000 rpm |
| Spindle motor power | 18.5 kW |
| Length x width x height | 3200.0 × 3250.0 × 3245.0 |
| Weight | 5300 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Stama MC326TWIN |
| Last availability date | 09/09/2026 |
| Product id | P260212459 |
| Language |
This STAMA MC326TWIN vertical machining center, manufactured in 2011, features a dual-spindle and dual-table configuration designed for efficient simultaneous machining. It operates with a total of 4 axes, providing precise control over complex machining tasks. The machine's dimensions are 3200 mm in length, 3250 mm in width, and 3245 mm in height, with a weight of 5300 kg.
Each of the two tables measures 700 mm in length and 350 mm in width, equipped with 2 T-slots each, with a T-slot width of 14H12 mm. The maximum weight capacity on each table is 450 kg, and the maximum part weight is 5 kg. The travel distances are 520 mm along the X-axis, 360 mm along the Y-axis, and 360 mm along the Z-axis.
The machine is equipped with two spindles featuring HSK-A 63 taper connections, spaced 266 mm apart. The spindle speed ranges from 36 rpm up to 12,000 rpm, powered by an 18.5 kW spindle motor. The distance between the spindle connection and table ranges from 200 mm to 560 mm. Rapid traverse speed reaches up to 60 m/min.
The tool changer includes 2 magazines with 21 tool pockets each, supporting tools up to 88 mm in diameter, or up to 125 mm diameter with free space, with a maximum tool length of 300 mm and maximum tool weight of 5 kg. The average chip-to-chip time is approximately 2.4 seconds.
Additional features include coolant nozzles positioned above the tool turret and along the interior walls, enhancing machining cooling and chip removal. The machine has a control panel located on the left side and is fitted with a signal tower light with red, yellow, and green indicators for operational status.
The machine's exterior is clean and well-maintained with minor wear, while the interior shows some wear with metal shavings present and some paint chipping and residue on base and internal surfaces. Some rust and residue are visible around spindle faces and interior walls. Hydraulic or pneumatic lines and cylinders are connected to the tool holders and tool changer mechanism, indicating integrated fluid power systems for tool operation.
Electrical requirements include a 50 Hz, 3-phase 400V connection, with a total installed power of 40 kVA. Compressed air connection is rated at 6 bar.
This machining center is suitable for workshops requiring a versatile, dual-spindle machine with multiple tool capacity and moderate table size for high-precision vertical machining operations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2013 |
| Offers online | 47 |
| Last activity | Nov. 13, 2026 |