| Manufacturer | STAMA |
|---|---|
| Model | MC 734M |
| Year | 2006 |
| Location | Germany
|
Machine overview:
This listing is for a 5-axis STAMA MC 734M vertical machining centre, manufactured in 2006. The machine is configured for multi-axis machining and is equipped with a FANUC 16i-MB control. It has a 5-axis configuration and a maximum spindle speed of 12,000 rpm.
Key working ranges and mechanical data:
- X-axis travel: 800 mm
- Y-axis travel: 520 mm
- Z-axis travel: 510 mm
- Interference radius: 252 mm
- Table width: 2700 mm
- Machine height: 3300 mm
- Machine length: 3700 mm
- Machine weight: 9000 kg
Spindle, tooling and feeds:
- Spindle taper: Capto 6
- Spindle bearing diameter: 85 mm
- Max spindle torque: 142 Nm (S6/20%)
- Through-spindle coolant: yes
- Tool magazine capacity: 48 + 90 tools
- Tool clamping force: 8,000 N
- Max tool diameter: 160 mm
- Max tool length: 300 mm
- Feed rate X / Y / Z: 1 – 10,000 mm/min
- Rapid traverse X / Y / Z: 60 m/min
- Max feed force X / Y: 7,000 N
- Max feed force Z: 8,000 N
- Max milling capacity: 600 cm³
- Max drilling diameter: 40 mm
- Max tapping diameter: M30
Electrical and utility requirements:
- Connected load: 51 kVA
- Total power requirement: 46 kW
- Connection voltage: 400 V3 50 Hz
- Nominal current: 75 A
- Additional fuse: 3 x 80 A
- Min cross section connection: 4 x 25 mm²
Drive, motors and auxiliary equipment (as specified):
- Main spindle motor: Kessler DMQ 112.AM.4.AFS/F (22.0 kW, 12,000 rpm)
- X-axis motor: Fanuc A06B-0269-B100 (5.5 kW, 3,000 rpm)
- Y-axis motor: Fanuc A06B-0266-B100 (4.5 kW, 3,000 rpm)
- Z-axis motor: Fanuc A06B-0273-B400 (5.5 kW, 3,000 rpm)
- Tool magazine motor: Fanuc A06B-0235-B000 (2.5 kW, 4,000 rpm)
- 4th axis (B) motor: Fanuc A06B-0266-B100 (4.5 kW, 3,000 rpm)
- 5th axis (C) motor: Fanuc A06B-0236-B100 (2.3 kW, 4,000 rpm)
- Additional axis and accessory motors and pumps are listed in the specification (tool magazine, supplementary/flat magazine, coolant pumps, dirty water pump, wash gun pump, self-cleaning filter motor, chip conveyor motor, hydraulic unit motor, cabin extraction motor, conveyor belt motor).
Included equipment:
- Chip conveyor
- Auxiliary magazine
- Coolant system
- Workpiece loader
Notes:
All technical values and included items above are taken from the provided specification. No operational status, testing, or warranty information is stated in the specification.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 5-axis STAMA MC 734M was manufactured in 2006. It features a travel range of 800 mm in the X-axis, 520 mm in the Y-axis, and 510 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 48 + 90 tools. If you are looking to get high-quality machining capabilities, consider the STAMA MC 734M vertical machining centre we have for sale. Contact us for further details.- Interference Radius: 252 mm
- Connected Load: 51 kVA
- Total Power Requirement: 46 kW
- Connection Voltage: 400 V3 50 Hz
- Nominal Current: 75 A
- Additional Fuse: 3x 80 A
- Min Cross Section Connection: 4x25 mm²
- Spindle Taper: Capto 6
- Spindle Bearing Diameter: 85 mm
- Max Spindle Torque: 142 Nm (S6/20%)
- Tool Magazine Capacity: 48 + 90 tools
- Tool Clamping Force: 8,000 N
- Max Tool Diameter: 160 mm
- Max Tool Length: 300 mm
- Feed Rate X / Y / Z: 1 - 10,000 mm/min
- Rapid Traverse X / Y / Z: 60 m/min
- Max Feed Force X / Y: 7,000 N
- Max Feed Force Z: 8,000 N
- Max Milling Capacity: 600 cm³
- Max Drilling Diameter: 40 mm
- Max Tapping Diameter: M30
- Main Spindle Motor 1: Kessler DMQ 112.AM.4.AFS/F (22.0 kW, 12,000 rpm)
- X-Axis Motor: Fanuc A 06 B-0269-B 100 (5.5 kW, 3,000 rpm)
- Y-Axis Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)
- Z-Axis Motor: Fanuc A 06 B-0273-B 400 (5.5 kW, 3,000 rpm)
- Tool Magazine Motor: Fanuc A 06 B-0235-B 000 (2.5 kW, 4,000 rpm)
- 4th Axis B Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)
- 5th Axis C Motor: Fanuc A 06 B-0236-B 100 (2.3 kW, 4,000 rpm)
- 8th Axis X2 Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)
- 7th Axis U Motor: Fanuc A 06 B-0213-B 400 (0.75 kW, 4,000 rpm)
- V-Axis Motor: Fanuc A 06 B-0216-B 400 (1.0 kW, 4,000 rpm)
- Supplementary Magazine Motor: Fanuc A 06 B-216-B 400 (1.0 kW, 4,000 rpm)
- Flat Magazine Motor: Fanuc A 06 B-0235-B 100 (2.5 kW, 4,000 rpm)
- Coolant Pump 1: Brinkmann BFS 238/70 (5.0 kW, 2,900 rpm)
- Coolant Pump 2: Brinkmann TH 90/470-540 (3.3 kW, 2,900 rpm)
- Dirty Water Pump: Brinkmann TAS 603/280-6156 (5.5 kW, 2,900 rpm)
- Wash Gun Pump: Brinkmann TH 90/470-540 (3.3 kW, 2,900 rpm)
- Self-cleaning Lamella Filter Motor: Motovario P 63 B 4 (0.18 kW, 1,360 rpm)
- Chip Conveyor Motor: Bauer BS 06-74V/D 05 LA4/SP (0.25 kW, 1,350 rpm)
- Hydraulic Unit Motor: Rexroth UPE5-4.00A10V5010ANT-H-1-025 (4.0 kW, 1,390 rpm)
- Cabin Extraction Motor: Ziehl-Abegg RH 31 M-20K.5H.2R (0.75 kW, 2,880 rpm)
- Conveyor Belt Motor: SEW-Eurodrive R 47 DT 7104/AS B1 (290 Nm, 1,380 rpm)
Included Equipment:
Chip conveyor, auxiliary magazine, coolant system, workpiece loader
Control Brand: FANUC
Control Model: 16i-MB
Machine Height: 3300 mm
Machine Length: 3700 mm
Machine Weight: 9000 kg
Number of Axes: 5
Spindle Speed: 12000 RPM
Table Width: 2700 mm
Through-spindle Coolant: yes
X-axis Travel: 800 mm
Y-axis Travel: 520 mm
Z-axis Travel: 510 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Oct. 31, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 5-axis STAMA MC 734M was manufactured in 2006. It features a travel range of 800 mm in the X-axis, 520 mm in the Y-axis, and 510 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 48 + 90 tools. If you are looking to get high-quality machining capabilities, consider the STAMA MC 734M vertical machining centre we have for sale. Contact us for further details.- Interference Radius: 252 mm
- Connected Load: 51 kVA
- Total Power Requirement: 46 kW
- Connection Voltage: 400 V3 50 Hz
- Nominal Current: 75 A
- Additional Fuse: 3x 80 A
- Min Cross Section Connection: 4x25 mm²
- Spindle Taper: Capto 6
- Spindle Bearing Diameter: 85 mm
- Max Spindle Torque: 142 Nm (S6/20%)
- Tool Magazine Capacity: 48 + 90 tools
- Tool Clamping Force: 8,000 N
- Max Tool Diameter: 160 mm
- Max Tool Length: 300 mm
- Feed Rate X / Y / Z: 1 - 10,000 mm/min
- Rapid Traverse X / Y / Z: 60 m/min
- Max Feed Force X / Y: 7,000 N
- Max Feed Force Z: 8,000 N
- Max Milling Capacity: 600 cm³
- Max Drilling Diameter: 40 mm
- Max Tapping Diameter: M30
- Main Spindle Motor 1: Kessler DMQ 112.AM.4.AFS/F (22.0 kW, 12,000 rpm)
- X-Axis Motor: Fanuc A 06 B-0269-B 100 (5.5 kW, 3,000 rpm)
- Y-Axis Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)
- Z-Axis Motor: Fanuc A 06 B-0273-B 400 (5.5 kW, 3,000 rpm)
- Tool Magazine Motor: Fanuc A 06 B-0235-B 000 (2.5 kW, 4,000 rpm)
- 4th Axis B Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)
- 5th Axis C Motor: Fanuc A 06 B-0236-B 100 (2.3 kW, 4,000 rpm)
- 8th Axis X2 Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)
- 7th Axis U Motor: Fanuc A 06 B-0213-B 400 (0.75 kW, 4,000 rpm)
- V-Axis Motor: Fanuc A 06 B-0216-B 400 (1.0 kW, 4,000 rpm)
- Supplementary Magazine Motor: Fanuc A 06 B-216-B 400 (1.0 kW, 4,000 rpm)
- Flat Magazine Motor: Fanuc A 06 B-0235-B 100 (2.5 kW, 4,000 rpm)
- Coolant Pump 1: Brinkmann BFS 238/70 (5.0 kW, 2,900 rpm)
- Coolant Pump 2: Brinkmann TH 90/470-540 (3.3 kW, 2,900 rpm)
- Dirty Water Pump: Brinkmann TAS 603/280-6156 (5.5 kW, 2,900 rpm)
- Wash Gun Pump: Brinkmann TH 90/470-540 (3.3 kW, 2,900 rpm)
- Self-cleaning Lamella Filter Motor: Motovario P 63 B 4 (0.18 kW, 1,360 rpm)
- Chip Conveyor Motor: Bauer BS 06-74V/D 05 LA4/SP (0.25 kW, 1,350 rpm)
- Hydraulic Unit Motor: Rexroth UPE5-4.00A10V5010ANT-H-1-025 (4.0 kW, 1,390 rpm)
- Cabin Extraction Motor: Ziehl-Abegg RH 31 M-20K.5H.2R (0.75 kW, 2,880 rpm)
- Conveyor Belt Motor: SEW-Eurodrive R 47 DT 7104/AS B1 (290 Nm, 1,380 rpm)
Included Equipment:
Chip conveyor, auxiliary magazine, coolant system, workpiece loader
Control Brand: FANUC
Control Model: 16i-MB
Machine Height: 3300 mm
Machine Length: 3700 mm
Machine Weight: 9000 kg
Number of Axes: 5
Spindle Speed: 12000 RPM
Table Width: 2700 mm
Through-spindle Coolant: yes
X-axis Travel: 800 mm
Y-axis Travel: 520 mm
Z-axis Travel: 510 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Machine overview:
This listing is for a 5-axis STAMA MC 734M vertical machining centre, manufactured in 2006. The machine is configured for multi-axis machining and is equipped with a FANUC 16i-MB control. It has a 5-axis configuration and a maximum spindle speed of 12,000 rpm.
Key working ranges and mechanical data:
- X-axis travel: 800 mm
- Y-axis travel: 520 mm
- Z-axis travel: 510 mm
- Interference radius: 252 mm
- Table width: 2700 mm
- Machine height: 3300 mm
- Machine length: 3700 mm
- Machine weight: 9000 kg
Spindle, tooling and feeds:
- Spindle taper: Capto 6
- Spindle bearing diameter: 85 mm
- Max spindle torque: 142 Nm (S6/20%)
- Through-spindle coolant: yes
- Tool magazine capacity: 48 + 90 tools
- Tool clamping force: 8,000 N
- Max tool diameter: 160 mm
- Max tool length: 300 mm
- Feed rate X / Y / Z: 1 – 10,000 mm/min
- Rapid traverse X / Y / Z: 60 m/min
- Max feed force X / Y: 7,000 N
- Max feed force Z: 8,000 N
- Max milling capacity: 600 cm³
- Max drilling diameter: 40 mm
- Max tapping diameter: M30
Electrical and utility requirements:
- Connected load: 51 kVA
- Total power requirement: 46 kW
- Connection voltage: 400 V3 50 Hz
- Nominal current: 75 A
- Additional fuse: 3 x 80 A
- Min cross section connection: 4 x 25 mm²
Drive, motors and auxiliary equipment (as specified):
- Main spindle motor: Kessler DMQ 112.AM.4.AFS/F (22.0 kW, 12,000 rpm)
- X-axis motor: Fanuc A06B-0269-B100 (5.5 kW, 3,000 rpm)
- Y-axis motor: Fanuc A06B-0266-B100 (4.5 kW, 3,000 rpm)
- Z-axis motor: Fanuc A06B-0273-B400 (5.5 kW, 3,000 rpm)
- Tool magazine motor: Fanuc A06B-0235-B000 (2.5 kW, 4,000 rpm)
- 4th axis (B) motor: Fanuc A06B-0266-B100 (4.5 kW, 3,000 rpm)
- 5th axis (C) motor: Fanuc A06B-0236-B100 (2.3 kW, 4,000 rpm)
- Additional axis and accessory motors and pumps are listed in the specification (tool magazine, supplementary/flat magazine, coolant pumps, dirty water pump, wash gun pump, self-cleaning filter motor, chip conveyor motor, hydraulic unit motor, cabin extraction motor, conveyor belt motor).
Included equipment:
- Chip conveyor
- Auxiliary magazine
- Coolant system
- Workpiece loader
Notes:
All technical values and included items above are taken from the provided specification. No operational status, testing, or warranty information is stated in the specification.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Oct. 31, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
5-осен обработващ център STAMA MC 734M
5osé obráběcí centrum STAMA MC 734M
STAMA MC 734M 5-akset bearbejdningscenter
STAMA MC 734M 5-Achs-Bearbeitungszentrum
Κέντρο κατεργασίας 5 αξόνων STAMA MC 734M
STAMA MC 734M 5-axis machining center
Centro de mecanizado de 5 ejes STAMA MC 734M
Centre d'usinage 5 axes STAMA MC 734M
5-osni obradni centar STAMA MC 734M
STAMA MC 734M 5 tengelyes megmunkáló központ
Centro di lavoro a 5 assi STAMA MC 734M
STAMA MC 734M 5 ašių apdirbimo centras
STAMA MC 734M 5-assig bewerkingscentrum
Centrum obróbcze 5-osiowe STAMA MC 734M
Centro de usinagem de 5 eixos STAMA MC 734M
Centru de prelucrare cu 5 axe STAMA MC 734M
STAMA MC 734M 5-осевой обрабатывающий центр
5-osni obradni centar STAMA MC 734M
STAMA MC 734M 5-axligt bearbetningscenter
5 eksenli işleme merkezi STAMA MC 734M
EN
- Languages
English (GB)