Contact us to receive an offer.
| Manufacturer | STAMA |
|---|---|
| Model | MC 326 Plus |
| Year | 2007 |
| Location | Germany
|
This STAMA MC 326 Plus vertical machining center, manufactured in 2007, is designed for precision milling with a robust spindle motor power of 25.4 kW. The machine features travel capacities of 700 mm on the X-axis, 300 mm on the Y-axis, and 360 mm on the Z-axis, allowing for versatile machining operations. It is equipped with a tool changer that accommodates 2 magazines with 21 tool pockets each, facilitating efficient tool management.
The spindle offers a maximum speed of 10,500 rpm with 36 different speed settings and a maximum torque of 45 kN. It uses a SK40 spindle taper and has a spindle throat of 350 mm. The machine supports metrical thread cutting up to M20 and a bore capacity in steel of 18 mm in diameter. The feed rate for the X, Y, and Z axes can reach up to 10,000 mm/min, with rapid traverse rates up to 60 m/min, enhancing productivity.
The control system is a Fanuc 18i MB5, known for its reliability and user-friendly interface. The machine dimensions are approximately 3.5 m in length, 5.1 m in width, and 2.5 m in height, with a weight of about 6.64 tons excluding attachments.
The machine includes a large viewing window on the front door, providing good visibility into the machining area. The control panel is mounted on the right side and features an emergency stop button along with multiple control buttons for operational safety and convenience. The exterior of the machine appears clean and well-maintained with no visible damage, indicating careful upkeep.
Additional accessories such as a chip conveyor and extraction system are noted with dimensions but are not detailed further here. This machining center is suitable for a variety of milling tasks requiring precision and efficiency in a production environment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
x-travel: 700 mm
y-travel: 300 mm
z-travel: 360 mm
faceplate: A-Achse: 360° mm
control: Fanuc 18i MB5
Max. Milling-capacity: 200 cm³/min
bore capacity in steel (diameter): 18 mm
metrical thread cutting: M 20 M
tool changer with: 2x 21 Plätze
number of spindle speeds: 36 ... 10.500 U/min.
max. torque on the spindle: 45 kN
spindle taper MT: SK40
spindle throat: 350 mm
feed range: X/Y/Z: max. 10.000 mm/min
rapid traverse:: X/Y/Z: 60 m/min
interface:
total power requirement: 25,4 kW
Weight approx.: 6,64 ohne Anbauteile t
dimension machine approx.LxWxH: 3,5 x 5,1 x 2,5 m
Dimensions (LxWxH): Späneförderer: 2,4 x 1,1 x 1,6
Dimensions (LxWxH): Absaugung: 0,5 x 0,5 x 1,4
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 120 |
| Last activity | Nov. 3, 2026 |
x-travel: 700 mm
y-travel: 300 mm
z-travel: 360 mm
faceplate: A-Achse: 360° mm
control: Fanuc 18i MB5
Max. Milling-capacity: 200 cm³/min
bore capacity in steel (diameter): 18 mm
metrical thread cutting: M 20 M
tool changer with: 2x 21 Plätze
number of spindle speeds: 36 ... 10.500 U/min.
max. torque on the spindle: 45 kN
spindle taper MT: SK40
spindle throat: 350 mm
feed range: X/Y/Z: max. 10.000 mm/min
rapid traverse:: X/Y/Z: 60 m/min
interface:
total power requirement: 25,4 kW
Weight approx.: 6,64 ohne Anbauteile t
dimension machine approx.LxWxH: 3,5 x 5,1 x 2,5 m
Dimensions (LxWxH): Späneförderer: 2,4 x 1,1 x 1,6
Dimensions (LxWxH): Absaugung: 0,5 x 0,5 x 1,4
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This STAMA MC 326 Plus vertical machining center, manufactured in 2007, is designed for precision milling with a robust spindle motor power of 25.4 kW. The machine features travel capacities of 700 mm on the X-axis, 300 mm on the Y-axis, and 360 mm on the Z-axis, allowing for versatile machining operations. It is equipped with a tool changer that accommodates 2 magazines with 21 tool pockets each, facilitating efficient tool management.
The spindle offers a maximum speed of 10,500 rpm with 36 different speed settings and a maximum torque of 45 kN. It uses a SK40 spindle taper and has a spindle throat of 350 mm. The machine supports metrical thread cutting up to M20 and a bore capacity in steel of 18 mm in diameter. The feed rate for the X, Y, and Z axes can reach up to 10,000 mm/min, with rapid traverse rates up to 60 m/min, enhancing productivity.
The control system is a Fanuc 18i MB5, known for its reliability and user-friendly interface. The machine dimensions are approximately 3.5 m in length, 5.1 m in width, and 2.5 m in height, with a weight of about 6.64 tons excluding attachments.
The machine includes a large viewing window on the front door, providing good visibility into the machining area. The control panel is mounted on the right side and features an emergency stop button along with multiple control buttons for operational safety and convenience. The exterior of the machine appears clean and well-maintained with no visible damage, indicating careful upkeep.
Additional accessories such as a chip conveyor and extraction system are noted with dimensions but are not detailed further here. This machining center is suitable for a variety of milling tasks requiring precision and efficiency in a production environment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 120 |
| Last activity | Nov. 3, 2026 |
Обработващ център - вертикален STAMA MC 326 Plus
Obráběcí centrum - vertikální STAMA MC 326 Plus
STAMA MC 326 Plus Bearbejdningscenter - lodret
STAMA MC 326 Plus Bearbeitungszentrum Vertikal
Κέντρο κατεργασίας - κατακόρυφο STAMA MC 326 Plus
STAMA MC 326 Plus Machining center - vertical
Centro de mecanizado vertical STAMA MC 326 Plus
Centre d'usinage vertical STAMA MC 326 Plus
Obradni centar - vertikalni STAMA MC 326 Plus
STAMA MC 326 Plus Megmunkáló központ - függőleges
Centro di lavoro verticale STAMA MC 326 Plus
Apdirbimo centras – vertikalus STAMA MC 326 Plus
STAMA MC 326 Plus Bewerkingscentrum - verticaal
Pionowe centrum obróbcze STAMA MC 326 Plus
Centro de usinagem - vertical STAMA MC 326 Plus
Centru de prelucrare - vertical STAMA MC 326 Plus
STAMA MC 326 Plus Вертикальный обрабатывающий центр
Obradni centar - vertikalni STAMA MC 326 Plus
STAMA MC 326 Plus Bearbetningscentrum - vertikalt
Dikey işleme merkezi STAMA MC 326 Plus
EN
- Languages
English (GB)