| Manufacturer | Spinner |
|---|---|
| Model | U5-1520 |
| Year | 2014 |
| Location | Russia
|
This Spinner U5-1520 machining center, manufactured in 2014, is equipped with a Heidenhain TNC 620 control system. It offers axis movements of X 1,520 mm, Y 520 mm, and Z 460 mm, suitable for a variety of machining tasks. The spindle has a maximum speed of 12,000 rpm and utilizes an SK40 taper, supported by a tool magazine with 54+1 positions, allowing for efficient tool changes.
The working table has a diameter of 650 mm and can handle a maximum load of 500 kg. The machine's overall dimensions are approximately 4,655 mm in length, 2,943 mm in width, and 2,500 mm in height, with a weight of around 10,500 kg.
This model features a special version with a fixed table on two levels and includes optical linear scales on the X, Y, and Z axes for precise positioning. It is equipped with a chip conveyor and direct measuring systems, as well as hydraulic brakes on both rotary axes. The machine is prepared for high-pressure washing and includes nozzles for supplying cooled compressed air to the spindle head, with M-function switching, plus a flushing gun in the working area.
Additional equipment includes an HR410 hand-held remote control and several TNC software options, such as measuring system functions, automatic kinematic measurement with measuring cycles, 5-axis synchronous interpolation and 3-D processing, and program options for checking undercuts and manual wheel overlapping during program runs.
The machine is enclosed with a large front window providing visibility into the machining area. The control panel is mounted on the right side, featuring a screen and multiple buttons for operation. The exterior appears clean and in good condition without visible damage. Inside, the rotary table shows signs of wear and paint chipping on the mounting surface, and interior surfaces exhibit some paint chipping and discoloration consistent with use. A rectangular metal fixture or vice is mounted on the machine bed. A hydraulic or coolant unit with hoses is present, though some dust and dirt are visible on the unit and hoses. Ventilation grilles and a small windowed door are located on the machine enclosure's side, with a coiled hose or cable resting on the right side. Overall, the machine presents a functional and well-equipped machining center with normal signs of use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
General Information
Manufacturer: Spinner
Model: U5-1520
Year of manufacture: 2014
Control system: Heidenhain TNC 620
Axis movements: X 1,520 mm, Y 520 mm, Z 460 mm
Operating time: 26,904 hours
Spindle running time: 8,415 hours
Spindle
Spindle speed: 12,000 rpm
Spindle taper: SK40
Tool magazine: 54+1 positions
Working table
Maximum table load: 500 kg
Table diameter: 650 mm
Dimensions and weight
Dimensions: 4,655 mm x 2,943 mm x 2,500 mm
Weight: approx. 10,500 kg
Condition:
Condition: Used
Functionality: Tested, fully functional
Equipment and additional equipment:
Special version for fixed table on two levels.
Optical linear scales in the X/Y/Z axes
Chip conveyor
Direct measuring systems and hydraulic brake on both rotary axes
Preparation for high pressure washing
Nozzle for supplying cooled compressed air to the spindle head
Compressed air supply via nozzle at the spindle head with M-function switching
Flushing gun in the working area
HR410 hand-held remote control
TNC program option "Measuring system functions".
TNC program option "Automatic kinematic measurement with measuring cycles".
TNC software option "5-axis synchronous interpolation and 3-D processing".
TNC program option "Check undercuts and manual wheel overlapping in program run mode".
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 3 |
| Last activity | Oct. 7, 2026 |
General Information
Manufacturer: Spinner
Model: U5-1520
Year of manufacture: 2014
Control system: Heidenhain TNC 620
Axis movements: X 1,520 mm, Y 520 mm, Z 460 mm
Operating time: 26,904 hours
Spindle running time: 8,415 hours
Spindle
Spindle speed: 12,000 rpm
Spindle taper: SK40
Tool magazine: 54+1 positions
Working table
Maximum table load: 500 kg
Table diameter: 650 mm
Dimensions and weight
Dimensions: 4,655 mm x 2,943 mm x 2,500 mm
Weight: approx. 10,500 kg
Condition:
Condition: Used
Functionality: Tested, fully functional
Equipment and additional equipment:
Special version for fixed table on two levels.
Optical linear scales in the X/Y/Z axes
Chip conveyor
Direct measuring systems and hydraulic brake on both rotary axes
Preparation for high pressure washing
Nozzle for supplying cooled compressed air to the spindle head
Compressed air supply via nozzle at the spindle head with M-function switching
Flushing gun in the working area
HR410 hand-held remote control
TNC program option "Measuring system functions".
TNC program option "Automatic kinematic measurement with measuring cycles".
TNC software option "5-axis synchronous interpolation and 3-D processing".
TNC program option "Check undercuts and manual wheel overlapping in program run mode".
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Spinner U5-1520 machining center, manufactured in 2014, is equipped with a Heidenhain TNC 620 control system. It offers axis movements of X 1,520 mm, Y 520 mm, and Z 460 mm, suitable for a variety of machining tasks. The spindle has a maximum speed of 12,000 rpm and utilizes an SK40 taper, supported by a tool magazine with 54+1 positions, allowing for efficient tool changes.
The working table has a diameter of 650 mm and can handle a maximum load of 500 kg. The machine's overall dimensions are approximately 4,655 mm in length, 2,943 mm in width, and 2,500 mm in height, with a weight of around 10,500 kg.
This model features a special version with a fixed table on two levels and includes optical linear scales on the X, Y, and Z axes for precise positioning. It is equipped with a chip conveyor and direct measuring systems, as well as hydraulic brakes on both rotary axes. The machine is prepared for high-pressure washing and includes nozzles for supplying cooled compressed air to the spindle head, with M-function switching, plus a flushing gun in the working area.
Additional equipment includes an HR410 hand-held remote control and several TNC software options, such as measuring system functions, automatic kinematic measurement with measuring cycles, 5-axis synchronous interpolation and 3-D processing, and program options for checking undercuts and manual wheel overlapping during program runs.
The machine is enclosed with a large front window providing visibility into the machining area. The control panel is mounted on the right side, featuring a screen and multiple buttons for operation. The exterior appears clean and in good condition without visible damage. Inside, the rotary table shows signs of wear and paint chipping on the mounting surface, and interior surfaces exhibit some paint chipping and discoloration consistent with use. A rectangular metal fixture or vice is mounted on the machine bed. A hydraulic or coolant unit with hoses is present, though some dust and dirt are visible on the unit and hoses. Ventilation grilles and a small windowed door are located on the machine enclosure's side, with a coiled hose or cable resting on the right side. Overall, the machine presents a functional and well-equipped machining center with normal signs of use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 3 |
| Last activity | Oct. 7, 2026 |
5-осен обработващ център Spinner U5-1520
5osé obráběcí centrum Spinner U5-1520
Spinner U5-1520 5-akset bearbejdningscenter
Spinner U5-1520 5-Achs-Bearbeitungszentrum
Κέντρο κατεργασίας 5 αξόνων Spinner U5-1520
Spinner U5-1520 5-axis machining center
Centro de mecanizado de 5 ejes Spinner U5-1520
Centre d'usinage 5 axes Spinner U5-1520
5-osni obradni centar Spinner U5-1520
Spinner U5-1520 5 tengelyes megmunkáló központ
Centro di lavoro a 5 assi Spinner U5-1520
5 ašių apdirbimo centras Spinner U5-1520
Spinner U5-1520 5-assig bewerkingscentrum
Centrum obróbcze 5-osiowe Spinner U5-1520
Centro de maquinação de 5 eixos Spinner U5-1520
Centru de prelucrare cu 5 axe Spinner U5-1520
Обрабатывающий центр Spinner U5-1520
5-osni obradni centar Spinner U5-1520
Spinner U5-1520 5-axligt bearbetningscenter
5 eksenli işleme merkezi Spinner U5-1520
EN
- Languages
English (GB)