Poland
1984
| Length between centers | 5000 mm |
|---|---|
| Turning length | 5000 mm |
| Ø above the bed | 1600 mm |
| Diameter in the gap | 105 mm |
| Max workpiece weight | 30000 kg |
| Overhauled | yes |
| Tailstock | yes |
| Type of chuck | 4 jaw |
| Max. turning diameter | 1600 mm |
|---|---|
| Center height | 800 mm |
| Ø above transversing slide | 1280 mm |
| Faceplate diameter | 1600 mm |
| Spindle motor power | 75 kW |
| Year of overhauling | 2026 |
| Steady | no |
Belgium
2024
| Length between centers | 8000 mm |
|---|---|
| Turning length | 8000 mm |
| Ø above the bed | 930 mm |
| Diameter in the gap | 1150 mm |
| Max workpiece weight | 6000 kg |
| Turning speed | 800 rpm |
| Overhauled | no |
| Steady | yes |
| Max. turning diameter | 930 mm |
|---|---|
| Center height | 465 mm |
| Ø above transversing slide | 630 mm |
| Faceplate diameter | 800 mm |
| Spindle bore | 105 mm |
| Spindle motor power | 27 kW |
| Tailstock | yes |
| Type of chuck | 4 jaw |
Poland
1983
| Length between centers | 10000 mm |
|---|---|
| Turning length | 10000 mm |
| Ø above transversing slide | 500 mm |
| Turning speed | 800 rpm |
| Overhauled | no |
| Steady | yes |
| Max. turning diameter | 1050 mm |
|---|---|
| Ø above the bed | 800 mm |
| Diameter in the gap | 95 mm |
| Spindle motor power | 22 kW |
| Tailstock | yes |
| Type of chuck | 3 jaw |
Poland
1982
| Length between centers | 5000 mm |
|---|---|
| Turning length | 5000 mm |
| Ø above transversing slide | 630 mm |
| Max workpiece weight | 12000 kg |
| Turning speed | -1 rpm |
| Tailstock | yes |
| Type of chuck | 4 jaw |
| Max. turning diameter | 1250 mm |
|---|---|
| Ø above the bed | 1000 mm |
| Diameter in the gap | 1250 mm |
| Spindle bore | 120 mm |
| Overhauled | no |
| Steady | yes |
Poland
1984
| Length between centers | 5000 mm |
|---|---|
| Ø above the bed | 930 mm |
| Max workpiece weight | 9000 kg |
| Turning speed | 800 rpm |
| Tailstock | no |
| Type of chuck | 4 jaw |
| Turning length | 5000 mm |
|---|---|
| Diameter in the gap | 1200 mm |
| Spindle bore | 95 mm |
| Overhauled | no |
| Steady | no |
Italy
2006
| Overhauled | no |
|---|---|
| Steady | no |
| Tailstock | no |
|---|
Bulgaria
1972
| Length between centers | 5000 mm |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
| Length between centers | 3000 mm |
|---|---|
| Ø above transversing slide | 630 mm |
| Spindle bore | 95 mm |
| Tailstock | no |
| Ø above the bed | 930 mm |
|---|---|
| Diameter in the gap | 1200 mm |
| Overhauled | no |
| Steady | no |
Poland
1983
| Length between centers | 6000 mm |
|---|---|
| Turning length | 6000 mm |
| Ø above the bed | 800 mm |
| Diameter in the gap | 95 mm |
| Spindle motor power | 25 kW |
| Tailstock | yes |
| Max. turning diameter | 800 mm |
|---|---|
| Center height | 400 mm |
| Ø above transversing slide | 530 mm |
| Max workpiece weight | 9000 kg |
| Overhauled | no |
| Steady | yes |
Czech Republic
2025
| Length between centers | 10000 mm |
|---|---|
| Turning length | 10000 mm |
| Ø above the bed | 1220 mm |
| Max workpiece weight | 15000 kg |
| Overhauled | no |
| Steady | no |
| Max. turning diameter | 1550 mm |
|---|---|
| Center height | 1220 mm |
| Ø above transversing slide | 1550 mm |
| Spindle bore | 120 mm |
| Tailstock | no |
Poland
1991
| Turning length | 5000 mm |
|---|---|
| Overhauled | yes |
| Steady | no |
| Max workpiece weight | 40000 kg |
|---|---|
| Tailstock | yes |
| Type of chuck | 4 jaw |
| Length between centers | 8000 mm |
|---|---|
| Ø above transversing slide | 630 mm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 950 mm |
|---|---|
| Max workpiece weight | 10000 kg |
| Tailstock | no |
| Length between centers | 3000 mm |
|---|---|
| Turning length | 3000 mm |
| Ø above the bed | 930 mm |
| Diameter in the gap | 1200 mm |
| Max workpiece weight | kg |
| Turning speed | 250 rpm |
| Overhauled | no |
| Tailstock | no |
| Max. turning diameter | mm |
|---|---|
| Center height | mm |
| Ø above transversing slide | mm |
| Faceplate diameter | mm |
| Spindle bore | 320 mm |
| Spindle motor power | kW |
| Year of overhauling | |
| Steady | no |
Poland
1988
| Length between centers | 10000 mm |
|---|---|
| Turning length | 8000 mm |
| Ø above the bed | 4000 mm |
| Faceplate diameter | 2000 mm |
| Spindle bore | 105 mm |
| Spindle motor power | 75 kW |
| Year of overhauling | 1988 |
| Steady | yes |
| Max. turning diameter | 4000 mm |
|---|---|
| Center height | 2050 mm |
| Ø above transversing slide | 4000 mm |
| Max workpiece weight | 30000 kg |
| Turning speed | 98 rpm |
| Overhauled | no |
| Tailstock | yes |
| Type of chuck | 4 jaw |
Netherlands
| Length between centers | 6000 mm |
|---|---|
| Ø above transversing slide | 740 mm |
| Turning speed | 1800 rpm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 1100 mm |
|---|---|
| Spindle bore | 110 mm |
| Spindle motor power | 22 kW |
| Tailstock | no |
| Type of chuck | 3 jaw |
Netherlands
2001
| Turning length | 6000 mm |
|---|---|
| Ø above transversing slide | 1300 mm |
| Spindle motor power | 100 kW |
| Tailstock | no |
| Ø above the bed | 1600 mm |
|---|---|
| Turning speed | 250 rpm |
| Overhauled | no |
| Steady | no |
| Length between centers | 5000 mm |
|---|---|
| Center height | 350 mm |
| Spindle bore | 105 mm |
| Spindle motor power | 15 kW |
| Tailstock | no |
| Turning length | 5000 mm |
|---|---|
| Faceplate diameter | 350 mm |
| Turning speed | 1000 rpm |
| Overhauled | no |
| Steady | no |
Netherlands
| Length between centers | 6000 mm |
|---|---|
| Ø above transversing slide | 740 mm |
| Turning speed | 1800 rpm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 1100 mm |
|---|---|
| Spindle bore | 110 mm |
| Spindle motor power | 22 kW |
| Tailstock | no |
| Type of chuck | 3 jaw |
Netherlands
| Length between centers | 4000 mm |
|---|---|
| Turning length | mm |
| Ø above the bed | 930 mm |
| Diameter in the gap | 1250 mm |
| Max workpiece weight | kg |
| Turning speed | 800 rpm |
| Overhauled | no |
| Tailstock | no |
| Max. turning diameter | mm |
|---|---|
| Center height | mm |
| Ø above transversing slide | 630 mm |
| Faceplate diameter | mm |
| Spindle bore | 95 mm |
| Spindle motor power | 22 kW |
| Year of overhauling | |
| Steady | no |
Poland
1982
| Length between centers | 3000 mm |
|---|---|
| Ø above transversing slide | 630 mm |
| Spindle bore | 120 mm |
| Spindle motor power | 27 kW |
| Tailstock | no |
| Ø above the bed | 1000 mm |
|---|---|
| Max workpiece weight | 12000 kg |
| Turning speed | 500 rpm |
| Overhauled | no |
| Steady | no |
Netherlands
| Length between centers | 6000 mm |
|---|---|
| Turning length | mm |
| Ø above the bed | 930 mm |
| Diameter in the gap | 1250 mm |
| Max workpiece weight | kg |
| Turning speed | 800 rpm |
| Overhauled | no |
| Max. turning diameter | mm |
|---|---|
| Center height | mm |
| Ø above transversing slide | 630 mm |
| Faceplate diameter | mm |
| Spindle bore | 95 mm |
| Spindle motor power | 22 kW |
| Year of overhauling |
| Length between centers | 4000 mm |
|---|---|
| Center height | 500 mm |
| Ø above transversing slide | 690 mm |
| Spindle bore | 150 mm |
| Spindle motor power | 22 kW |
| Tailstock | no |
| Max. turning diameter | 1300 mm |
|---|---|
| Ø above the bed | 1040 mm |
| Diameter in the gap | 1300 mm |
| Turning speed | 800 rpm |
| Overhauled | no |
| Steady | yes |
Netherlands
2012
| Length between centers | 8000 mm |
|---|---|
| Turning length | 8000 mm |
| Ø above the bed | 930 mm |
| Diameter in the gap | mm |
| Max workpiece weight | kg |
| Turning speed | 27 rpm |
| Overhauled | no |
| Tailstock | no |
| Max. turning diameter | 930 mm |
|---|---|
| Center height | mm |
| Ø above transversing slide | 630 mm |
| Faceplate diameter | mm |
| Spindle bore | 105 mm |
| Spindle motor power | kW |
| Year of overhauling | |
| Steady | no |
Netherlands
| Length between centers | 1250 mm |
|---|---|
| Ø above transversing slide | 210 mm |
| Spindle bore | 55 mm |
| Spindle motor power | 4 kW |
| Tailstock | no |
| Ø above the bed | 400 mm |
|---|---|
| Diameter in the gap | 600 mm |
| Turning speed | 1500 rpm |
| Overhauled | no |
| Steady | no |
| Length between centers | 6000 mm |
|---|---|
| Ø above the bed | 1000 mm |
| Spindle bore | 150 mm |
| Tailstock | no |
| Center height | 500 mm |
|---|---|
| Ø above transversing slide | 310 mm |
| Overhauled | no |
| Steady | yes |
| Length between centers | 236 mm |
|---|---|
| Turning length | mm |
| Ø above the bed | mm |
| Diameter in the gap | mm |
| Max workpiece weight | kg |
| Turning speed | 1480 rpm |
| Overhauled | no |
| Tailstock | no |
| Max. turning diameter | mm |
|---|---|
| Center height | mm |
| Ø above transversing slide | mm |
| Faceplate diameter | mm |
| Spindle bore | mm |
| Spindle motor power | kW |
| Year of overhauling | |
| Steady | no |
| Length between centers | 3000 mm |
| Max. turning diameter | 700 mm |
| Turning length | 3000 mm |
| Center height | 350 mm |
| Ø above the bed | 700 mm |
| Diameter in the gap | 425 mm |
| Max workpiece weight | 4000 kg |
| Spindle bore | 105 mm |
| Turning speed | 2000 rpm |
| Overhauled | no |
| Tailstock | no |
| Steady | no |
| Type of chuck | 3 jaw |
| ------------------- | |
| Length x width x height | 5800.0 × 1500.0 × 2100.0 |
| Weight | 6000 kg |
USA
EN
- Languages
English (GB)
English (US)
Français
Čeština
Español
Deutsch
Italiano
Polski
Русский
Türkçe
Português
Magyar
Hrvatski
Български
Nederlands
Ελληνικά
Dansk
Svenska
Română
Crpski
Lietuvių