Comac K1 Smart Kegging Machine

Manufacturer	Comac
Model	K1 Smart Kegging Machine
Category	Filling machines - Other filling machines (keg, drum, IBC, bag-in-box, etc.)

Complete line Bag in Box semi-automatic SacmiPakim Filling BIB FB-2

Italy 2007

Bib line currently installed and operational. A complete line with conveyor belts, which we use to process 3-liter bags, with an hourly production rate currently set at 35 hl/h. Production process: The empty box is mounted by the box erector and closed on one side. The automatic double-head filler fills two bags at a time and inserts them into the empty box. Box closure. Handle application. The entire line is in "fair" condition; I would recommend only routine maintenance. Used for aseptic filling. It was used for wine with residual sugar. It underwent a steam sterilization cycle before production and sterile filtration of the incoming product.

Price on request

View product

PeckaStroje PA001 Filling machine - Various equipment Low working hours

Czech Republic 2023

Output capacity	1800 u/h
Automation level	Semi-automatic

Number of filling heads	1
Engine power	2.2 kW

30,000 €

View product

Coster nasal spray filling machine

France 2016

Capper included	no
Rinsing / sterilization system	no

Conveyor included	no
Asceptic filling	no

35,500 €

View product

Used GAI Hochleistungs Filling machine

Austria 2020

Capper included	no
Rinsing / sterilization system	no

Conveyor included	no
Asceptic filling	no

Price on request

View product

Alcoa - Filling machine

Austria 2004

Capper included	no
Rinsing / sterilization system	no

Conveyor included	no
Asceptic filling	no

Price on request

View product

PWM Start Filling machine

Italy 2026

Output capacity	600 u/h
Filling technology	Other
Automation level	Semi-automatic
Capper included	no
Rinsing / sterilization system	no

Number of filling heads	1
Product substance	Liquids
Engine power	1.8 kW
Conveyor included	no
Asceptic filling	no

Price on request

View product

VAI ADVANCED PACKAGING TECHNOLOGY V5 / 10 SPECIAL Filling machine - Various equipment

Italy 2012

Vertical Bagging Machine For Powders (Detergents) And Shavings (Pellets). The Machinery Is In Good Condition, It Worked For About 2 Years And Then Was Stopped, It Has Been Stopped For About 5 Years. The Machinery from the photos is disassembled and stored in an indoor location. The machine comes complete with a weighing unit (double), conveyor belt and an uninterruptible power supply.

Price on request

View product

KREUZMAYR Postmix Zone Filling machine

Austria 2017

Capper included	no
Rinsing / sterilization system	no

Conveyor included	no
Asceptic filling	no

Price on request

View product

KREUZMAYR Postmix Zone Filling machine

Austria 2017

Capper included	no
Rinsing / sterilization system	no

Conveyor included	no
Asceptic filling	no

20,000 €

View product

Sell your machines to buyers worldwide

Join 10,000+ companies already selling with us

Reach 500,000+ monthly visitors

Sell faster at a great price

No hidden fees, it's free

Sell your machine

or contact us

KREUZMAYR Postmix Zone Filling machine

Austria 2017

Capper included	no
Rinsing / sterilization system	no

Conveyor included	no
Asceptic filling	no

11,000 €

View product

CONCETTI IPF 25 Filling machine

Belgium 2001

Filling technology	Net weight
Capper included	no
Rinsing / sterilization system	no

Previous industry	Food
Conveyor included	no
Asceptic filling	no

Price on request

View product

Automatic line for filling buckets with liquid and thick products

Bulgaria

Capper included	no
Rinsing / sterilization system	no

Conveyor included	no
Asceptic filling	no

Price on request

View product

DF SIENA MOD. MRC 5001 - Cream filling machine used

Italy 2007

DESCRIPTION: Filling machine designed to perform in-line dosing and filling operations of creams in cylindrical jars. SECTORS OF USE: Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing. MAIN FEATURES: Continuous movement monobloc machine made of AISI 304 stainless steel for filling jars. The format change takes place through the adjustment and replacement of some parts of the machine and is a simple operation. The machine can be set to manage manual dosing. Production capacity varies depending on the characteristics of the product (volume, density, etc.) and the type of format. Year of construction: 2007 TECHNICAL DATA Dimensions mm 1940 x 1220 x 2320 Weight kg 520 Voltage Volt 380 Frequency Hz 50 Current Amp 10

Price on request

View product

M+F KEG-Technik Monomat + RMT KEG Washer (2019)

Spain 2019

Output capacity	u/h
Max. filling capacity	L
Filling technology
Container material
Container height	mm
Previous industry
Engine power	kW
Conveyor included	no

Number of filling heads
Min. filling capacity	L
Product substance
Container diameter	mm
Sealing type
Automation level
Capper included	no
Rinsing / sterilization system	no

Price on request

View product

Lisec A1RL Filling machine - Various equipment

Belgium 1993

IG production - Dessicant Filler Make : Lisec Type : A1RL Year : 1993 Condition : Working order - As it is

Price on request

View product

Inova Pharmasystem SH210 Filling machine

Germany 2006

Capper included	no
Rinsing / sterilization system	no

Conveyor included	no
Asceptic filling	no

21,000 €

View product

2-PISTON FILLING LINE WITH TWIST-OFF CLOSER AND CAP POSITIONER

Spain

Consisting of: 2 PISTON FILLER FOR SEMI-DENSE PRODUCTS. Linear filling machine made of stainless steel, it is composed of a filling station with 2 nozzles, allowing a fast and accurate filling of both semi-dense and dense products. Piston fillers are a good solution for packaging a wide range of formats. This technology can be applied to the vast majority of industries, be it chemical or cosmetic products, edible oils or automotive. Piston capacity: Up to 1 liter (1.000ml). TWIST-OFF JAR SEALER WITH CAP POSITIONER This automatic steam seamer is designed to close jars, bottles and jars, glass or pet, with twist-off type closure. It is equipped with a cap unscrambler that facilitates the automation of the process.

Price on request

View product

SEMA DesignING Dávkovače Filling machine - Various equipment

Czech Republic 2023

Dispensers of highly viscous and lumpy mixtures • All-stainless design suitable for the food industry or chemistry • Volume dosing with a Lobe type pump • Suitable for lumpy and fibrous mixtures up to a maximum piece size of 4 cm • 35l funnel equipped with a stirrer, preparation for automatic filling • Automatic or semi-automatic operation (pedal, button) • A wide spectrum of operation and performance settings, the possibility of saving recipes • Setting the operation parameters via the touch display • Option to equip with additional technologies (conveyors, hoppers...) Dose range: 100 g - ??? Dose accuracy: Depending on the dosed mixture, dose size and settings Performance: Depending on the dosed mixture, dose size and setting Power supply: Compressed air, electricity: 3x400 VAC – 50 Hz Protection: IP 54 Power consumption: 3.5 kW Year of manufacture: 2023 Maximum noise level: 70 dB Estimated price: *799,000 without VAT * In the event of a request to change equipment or add technologies, the stated price will be validated

39,000 €

View product

Used Schutten Filling machine - Various equipment

Germany 2005

Filling and dosing Cup filler, make Schutten, year 2005 with lift-tilt device - 2-lane rotary filler with suitable lifting and tipping device for 200 litre standard trolley - Suitable for filling chunky products (e.g. delicatessen salads), pasty products (e.g. mayonnaise, spreads) - Stations: Denesting, filling, sealing, ejecting cups - Sealing film from roll, sealing tool with integrated cutter - Format set for butcher's tubs (112 x 86 cm) - Filling capacity: 15 - 35 cycles per minute (corresponds to 30 - 70 cups)

Price on request

View product

SIG, KHS, ROBOPACK - Filling machine - Various equipment

Germany ~ 2006

Output capacity	10000 u/h

Price on request

View product

Used ATO 50/4000 Rotopacker

Austria 1987

Offer Title: Rotopacker Manufacturer: ATO Model: 50/4000 Year of Manufacture: 1987 Technical Condition: As-is, where-is Capacity: 8 Spouts Output: 2400 bags per hour (25 kg)

Price on request

View product

World - FOIL ROLLING MILL PLANT - 6-HI, NON REVSING, 400-700 MM, THICKNESS EXIT: 5 -100 MICRONS

Germany 2001

Engine power	200 kW

Price on request

View product

Cream depositor with hopper used

Italy

Number of filling heads	2

Price on request

View product

CWM AUTOMATION - Cream depositor with hopper used

Italy

Number of filling heads	4

Price on request

View product

PNEUMATIC LINEAR FILLING MACHINE WITH 6 FILLING HEADS

Spain

REF-705 PNEUMATIC LINEAR FILLING MACHINE WITH 6 FILLING HEADS - Manual placing of the containers and automatic feed - Linear container outfeed through a slat conveyor - Adjustable to the containers’ size and format - The cylinder regulating the flow rate is pneumatic - The cylinder that positions the containers under the nozzles is automatic/pneumatic - 200-litre liquid storage tank on top; dimensions: length 1200mm, width 300mm, height 380mm. - Conveyor dimensions: length 2,240mm, width 87mm - Filling machine dimensions: length 960mm, width 1,200mm, height 2,350mm

Price on request

View product

POST PACK S. L. Bag filling machine

Germany

for liquid or powdery products volumetric system was used for disinfectant gel

Price on request

View product

FABER - Powder dosing machine used

Italy

Product substance	Powder

Automation level	Automatic

Price on request

View product

CONTEL - MICRO-ENEMA FILLING AND CAPPING MACHINE

Italy

DESCRIPTION: Micro-enema filling & closing machine for liquids, works with continuous movements, mechanical and automatic operation for filling and closing of containers. Highly flexible and designed with constructive modularity these machines are very well known for their robustness and reliability. SECTORS OF USE: Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing. MAIN FEATURES: Constructive modularity and compact overall design. The technological solutions, the quality of materials and ease of use are the elements that ensure the operational reliability of this machine. The cannulas and the micro-enemas are fed to the filling machine after which the individual cotnainers are positioned to be filled. Afterwards the micro-enemas arrive at the filling station where they are filled and then proceed towards the closing station where they are closed with cannulas.

Price on request

View product

Used ICP - Dosing powder system

Italy

DESCRIPTION: Semiautomatic system for the dosing of powder products into trays. The machine works in semiautomatic cycle and may be inserted in production lines. The operation is pneumatic and the parts in contact with the various products during the processing cycle are constructed with materials according to regulations. SECTORS OF USE: Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing. MAIN FEATURES: The semiautomatic dosing system allows pneumatic delivery of powdered products from bags or other containers into trays or other smaller containers for subsequent treatment. In this specific case into stainless steel trays for the drying process in an oven. The dosage allows you to pre-determine the amount of material to be loaded each time in the trays. Dosing and transport operations are carried out by a single person providing the product's pneumatic loading into the hopper above the dosing unit and then activating the dispenser. The bottom hopper is equipped with a product level indicator. When the product reaches 90% of the hopper volume, the pneumatic conveyor automatically stops to allow dosing. Dosing operations can be carried out with repetitive control or with manual control. The operator must manually place one tray at a time and extract it after …

Price on request

View product

Engler - Filling machine - Various equipment

Germany 2000

Filling and dosing Stainless steel machine for industrial filling of low-viscosity products by gravity Solenoid valve fillers are particularly suitable for filling low-viscosity products. They can be used for partial dosing or full filling (cold or hot filling) in cans, jars and bottles. The use of an interchangeable starwheel and manual height adjustment makes it possible to switch to a different can, jar or bottle size at short notice. The dosing range can be extended as required by using time-controlled valves. 4-position in-line filler for dosing liquids, was used for infusion brine for sausages in jars, Diameter of the filling elements: approx. 20 mm, Capacity: up to 80 fillings / minute Dimensions Weight: 2350 mm x 1250 mm x 2200 mm

6,000 €

View product

Details - Comac K1 Smart Kegging Machine

Specifications

Engine power	0.5 kW
Capper included	no
Conveyor included	no
Rinsing / sterilization system	no
Asceptic filling	no
-------------------
Length x width x height	1900.0 × 1100.0 × 2550.0
Weight	nan kg

Why buyers buy with us

Verified sellers

We verify sellers and confirm key machine information before introducing buyers and sellers

Secure transactions

We help secure international transactions and assist both parties until the deal is completed

Worldwide logistics support

From loading to international transport, we help coordinate the logistics through our trusted partners

Dedicated experts

A machinery sales specialist manages your request from the first message to the completed purchase

Comac K1 Smart Kegging Machine

Here is a selection of similar machines - Comac K1 Smart Kegging Machine

Specifications

Similar machines sold on our website

Are you looking for this machine?