| Manufacturer | SOUTHWIRE |
|---|---|
| Model | SCR SYSTEM #2500 |
| Year | 2008 |
| Location | Taiwan
|
This listing features a complete SOUTHWIRE SCR SYSTEM #2500 line, manufactured in 2008. The system is designed for efficient production with a total connected power of 10,700 kVA and an average demand of 5,000 kVA, operating at a normal rate of 20 tons per hour. The system includes several key components essential for rod production:
- Melting Furnace: SOUTHWIRE-designed with 4 rows of burners (30 total), a 27.5-ton capacity, and equipped with premix gas and air automatic ratio control. The fuel used is typically natural gas.
- Casting Machine: Features a 10 ft diameter casting wheel made of Cu-0.658% Cr-0.1% Zr alloy, producing cast bars sized 10 sq in. It includes SOUTHWIRE-designed steel band (8 in wide x 120 ft long) and a tundish capacity of 6,300 pounds of molten metal with automatic metal pouring control.
- Rolling Mill: Comprises 13 roll stands with varying diameters (one 18-inch with independent speed control, four 12-inch with independent speed control, and eight 8-inch blocks).
- Rod Cleaning Line: Measures 125 ft in length and utilizes a 3% isopropyl alcohol/water solution to chemically reduce copper oxide on the rods and cool them to room temperature.
- Coiler: Capable of producing coils with 30 in inner diameter and 56 in outer diameter, handling packages weighing 5,000 to 6,000 lbs.
The system requires a building area of approximately 85 ft by 310 ft (26,350 sq ft) for the main building and a total of 68,000 sq ft including rod storage. The rod sizes produced include 5/16", 1/2", 5/8", and 7/10".
The equipment bears clear SOUTHWIRE branding, including a metal logo plate attached to a green surface on the machinery, which is clean and intact with only minor surface marks. A yellow measuring tape is visible stretched horizontally across the logo plate, indicating attention to detail during inspection.
This SCR SYSTEM #2500 line is suitable for rapid start-up, capacity expansion, or new-build projects, offering a near-new condition without the lead time associated with new builds. Inspection is available by appointment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
*Complete SCR #2500 line; ready for rapid start-up
*Minimal wear; near-new condition without new-build lead time
*Ideal for quick capacity expansion or new-build projects
*Photos available; inspection by appointment
Maker: SOUTHWIRE (America)
Model: SCR SYSTEM #2500
Year of manufacture: 2008
- Rod sizes 5/16"", 1/2"", 5/8"", 7/10""
- Need area:
Main building: 85' x 310' (26,350 sq ft.)
Total building, including all rod storage: 68,000 sq ft.
Components:
- Melting furnace x 1 set
SOUTHWIRE designed: 4 rows of burners (30 total) holding furnace SOUTHWIRE designed and built 27.5 ton capacity with all combustion equipment uses premix gas and air automatic ratio control fuel is normally natural gas
- Casting machine x 1 set
SOUTHWIRE designed: Casting wheel 10 ft. in diameter, Cu -0.658 Cr -0.1% Zr alloy cast bar size 10 sq in automatic control of metal pouring SOUTHWIRE design steel band 8 in. wide x 120 ft. (low carbon steel) tundish capacity - 6300 pounds molten metal
- Rolling mill x 1 set
13 roll stands:
1 -18 diameter with independent speed control
4 -12 diameter with independent speed control
8 -8” diameter block
- Rod cleaning line x 1 set
Length: 125 ft. A 3% isopropyl alcohol / water solution is used to chemically reduce the copper oxide on the rod and cool the rod to room temperature
- Coiler x 1 set
Coil size: 30 in. Inner diameter, 56 in. Outer diameter, 5000 and 6000 Lbs. packages
- General x 1 set
Total connected power 10,700 kVA
Average demand 5000 kVA
Normal operating rate of 20 tons/hour
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – large company |
| Active since | 2025 |
| Offers online | 2 |
| Last activity | Oct. 5, 2026 |
*Complete SCR #2500 line; ready for rapid start-up
*Minimal wear; near-new condition without new-build lead time
*Ideal for quick capacity expansion or new-build projects
*Photos available; inspection by appointment
Maker: SOUTHWIRE (America)
Model: SCR SYSTEM #2500
Year of manufacture: 2008
- Rod sizes 5/16"", 1/2"", 5/8"", 7/10""
- Need area:
Main building: 85' x 310' (26,350 sq ft.)
Total building, including all rod storage: 68,000 sq ft.
Components:
- Melting furnace x 1 set
SOUTHWIRE designed: 4 rows of burners (30 total) holding furnace SOUTHWIRE designed and built 27.5 ton capacity with all combustion equipment uses premix gas and air automatic ratio control fuel is normally natural gas
- Casting machine x 1 set
SOUTHWIRE designed: Casting wheel 10 ft. in diameter, Cu -0.658 Cr -0.1% Zr alloy cast bar size 10 sq in automatic control of metal pouring SOUTHWIRE design steel band 8 in. wide x 120 ft. (low carbon steel) tundish capacity - 6300 pounds molten metal
- Rolling mill x 1 set
13 roll stands:
1 -18 diameter with independent speed control
4 -12 diameter with independent speed control
8 -8” diameter block
- Rod cleaning line x 1 set
Length: 125 ft. A 3% isopropyl alcohol / water solution is used to chemically reduce the copper oxide on the rod and cool the rod to room temperature
- Coiler x 1 set
Coil size: 30 in. Inner diameter, 56 in. Outer diameter, 5000 and 6000 Lbs. packages
- General x 1 set
Total connected power 10,700 kVA
Average demand 5000 kVA
Normal operating rate of 20 tons/hour
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features a complete SOUTHWIRE SCR SYSTEM #2500 line, manufactured in 2008. The system is designed for efficient production with a total connected power of 10,700 kVA and an average demand of 5,000 kVA, operating at a normal rate of 20 tons per hour. The system includes several key components essential for rod production:
- Melting Furnace: SOUTHWIRE-designed with 4 rows of burners (30 total), a 27.5-ton capacity, and equipped with premix gas and air automatic ratio control. The fuel used is typically natural gas.
- Casting Machine: Features a 10 ft diameter casting wheel made of Cu-0.658% Cr-0.1% Zr alloy, producing cast bars sized 10 sq in. It includes SOUTHWIRE-designed steel band (8 in wide x 120 ft long) and a tundish capacity of 6,300 pounds of molten metal with automatic metal pouring control.
- Rolling Mill: Comprises 13 roll stands with varying diameters (one 18-inch with independent speed control, four 12-inch with independent speed control, and eight 8-inch blocks).
- Rod Cleaning Line: Measures 125 ft in length and utilizes a 3% isopropyl alcohol/water solution to chemically reduce copper oxide on the rods and cool them to room temperature.
- Coiler: Capable of producing coils with 30 in inner diameter and 56 in outer diameter, handling packages weighing 5,000 to 6,000 lbs.
The system requires a building area of approximately 85 ft by 310 ft (26,350 sq ft) for the main building and a total of 68,000 sq ft including rod storage. The rod sizes produced include 5/16", 1/2", 5/8", and 7/10".
The equipment bears clear SOUTHWIRE branding, including a metal logo plate attached to a green surface on the machinery, which is clean and intact with only minor surface marks. A yellow measuring tape is visible stretched horizontally across the logo plate, indicating attention to detail during inspection.
This SCR SYSTEM #2500 line is suitable for rapid start-up, capacity expansion, or new-build projects, offering a near-new condition without the lead time associated with new builds. Inspection is available by appointment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2025 |
| Offers online | 2 |
| Last activity | Oct. 5, 2026 |
Пълна производствена линия за медни пръти SOUTHWIRE SCR SYSTEM #2500
Kompletní linka na výrobu měděných tyčí SOUTHWIRE SCR SYSTEM #2500
SOUTHWIRE SCR SYSTEM #2500 Komplet produktionslinje til kobberstænger
SOUTHWIRE SCR SYSTEM #2500 Komplette Produktionslinie für Kupferstäbe
Πλήρης γραμμή παραγωγής χάλκινων ράβδων SOUTHWIRE SCR SYSTEM #2500
SOUTHWIRE SCR SYSTEM #2500 — Complete Copper Rod Production Line In service for 5–6 years, but operated only occasionally — overall condition is close to new.
Línea de producción completa de barras de cobre SOUTHWIRE SCR SYSTEM #2500
Ligne de production complète de barres en cuivre SOUTHWIRE SCR SYSTEM #2500
Kompletna proizvodna linija za bakrene šipke SOUTHWIRE SCR SYSTEM #2500
SOUTHWIRE SCR SYSTEM #2500 Teljes rézrúd-gyártósor
Linea di produzione completa per barre di rame SOUTHWIRE SCR SYSTEM #2500
Pilna varinių strypų gamybos linija SOUTHWIRE SCR SYSTEM #2500
SOUTHWIRE SCR SYSTEM #2500 Volledige productielijn voor koperen staven
Kompletna linia do produkcji prętów miedzianych SOUTHWIRE SCR SYSTEM #2500
Linha de produção completa de barras de cobre SOUTHWIRE SCR SYSTEM #2500
Linie completă de producție pentru bare de cupru SOUTHWIRE SCR SYSTEM #2500
SOUTHWIRE SCR SYSTEM #2500 Полная линия по производству медных прутков
Kompletna proizvodna linija za bakarne šipke SOUTHWIRE SCR SYSTEM #2500
SOUTHWIRE SCR SYSTEM #2500 Komplett produktionslinje för kopparstänger
Komple bakır çubuk üretim hattı SOUTHWIRE SCR SYSTEM #2500
EN
- Languages
English (GB)