Contact us to receive an offer.
| Manufacturer | SMERAL |
|---|---|
| Model | LENR 25 |
| Year | 1971 |
| Location | Czech Republic
|
| Category | Forging - Eccentric presses |
| Power in tons | 25 T |
| Ram stroke | 80 mm |
| Nbr of strokes/min | 125 |
| Weight | 1400 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Datasheet | Smeral LENR 25 A |
| Last availability date | 05/11/2026 |
| Product id | P260729447 |
| Language |
Ексцентрикова преса SMERAL LENR 25
Excentrický lis SMERAL LENR 25
SMERAL LENR 25 Excenterpresse
SMERAL LENR 25 Exzenterpresse
Εκκεντρική πρέσα SMERAL LENR 25
Eccentric press SMERAL LENR 25
Prensa excéntrica SMERAL LENR 25
Presse excentrique SMERAL LENR 25
Ekscentarska preša SMERAL LENR 25
SMERAL LENR 25 Excenteres prés
Pressa eccentrica SMERAL LENR 25
SMERAL LENR 25 Ekscentrinis presas
SMERAL LENR 25 Excenterpers
Prasa mimośrodowa SMERAL LENR 25
Prensa excêntrica SMERAL LENR 25
Presă excentrică SMERAL LENR 25
SMERAL LENR 25 Кривошипный пресс
Ekscentarska presa SMERAL LENR 25
SMERAL LENR 25 Excenterpress
Eksantrik pres SMERAL LENR 25
|
Manufacturer/model/year: SMERAL LENR 25, year manufactured 1971. Machine type: forging - eccentric press. Pressing force: 25 t. Maximum number of strokes: 125 1/min. Ram stroke: 8–80 mm. Ram adjustment range: 55 mm. Machine weight: 1400 kg.
Overview: This is an eccentric forging press rated at 25 tonnes pressing capacity. It is configured with a variable ram stroke (8–80 mm) and a specified ram adjustment of 55 mm, allowing stroke and stop adjustments within that range. The unit is relatively heavy at 1400 kg, so appropriate handling equipment and floor loading considerations are required.
Visible components and features: The machine has an exposed drive mechanism and a heavy housing with a central bed area. A crankshaft bearing area and a circular flange secured with bolts are present on the left side of the machine. A lifting eye ring is fitted on the upper left section to assist with lifting/positioning.
Condition notes: External paint is worn in places and there is evidence of surface rust on metal surfaces. Oil/grease staining is present on several areas of the machine. These signs indicate typical workshop service wear and may require cleaning or surface treatment depending on intended use.
Workshop surroundings and safety: There is workshop clutter around the machine (boxes and tools) which represents potential trip hazards during access and handling. Buyers should plan for a clear working area and safe lifting/installation procedures.
What is not stated: No claims are made about operational condition, testing, refurbishment, or warranty. Interested buyers should request further technical inspection, testing records, or run-up information if required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Pressing force: 25 t
Maximum number of strokes per minute: 125 1/min
Ram stroke: 8-80 mm
Adjusting the ram: 55 mm
Machine weight: 1400 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 1159 |
| Last activity | Nov. 7, 2026 |
Pressing force: 25 t
Maximum number of strokes per minute: 125 1/min
Ram stroke: 8-80 mm
Adjusting the ram: 55 mm
Machine weight: 1400 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Forging - Eccentric presses |
| Power in tons | 25 T |
| Ram stroke | 80 mm |
| Nbr of strokes/min | 125 |
| Weight | 1400 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Datasheet | Smeral LENR 25 A |
| Last availability date | 05/11/2026 |
| Product id | P260729447 |
| Language |
Ексцентрикова преса SMERAL LENR 25
Excentrický lis SMERAL LENR 25
SMERAL LENR 25 Excenterpresse
SMERAL LENR 25 Exzenterpresse
Εκκεντρική πρέσα SMERAL LENR 25
Eccentric press SMERAL LENR 25
Prensa excéntrica SMERAL LENR 25
Presse excentrique SMERAL LENR 25
Ekscentarska preša SMERAL LENR 25
SMERAL LENR 25 Excenteres prés
Pressa eccentrica SMERAL LENR 25
SMERAL LENR 25 Ekscentrinis presas
SMERAL LENR 25 Excenterpers
Prasa mimośrodowa SMERAL LENR 25
Prensa excêntrica SMERAL LENR 25
Presă excentrică SMERAL LENR 25
SMERAL LENR 25 Кривошипный пресс
Ekscentarska presa SMERAL LENR 25
SMERAL LENR 25 Excenterpress
Eksantrik pres SMERAL LENR 25
|
Manufacturer/model/year: SMERAL LENR 25, year manufactured 1971. Machine type: forging - eccentric press. Pressing force: 25 t. Maximum number of strokes: 125 1/min. Ram stroke: 8–80 mm. Ram adjustment range: 55 mm. Machine weight: 1400 kg.
Overview: This is an eccentric forging press rated at 25 tonnes pressing capacity. It is configured with a variable ram stroke (8–80 mm) and a specified ram adjustment of 55 mm, allowing stroke and stop adjustments within that range. The unit is relatively heavy at 1400 kg, so appropriate handling equipment and floor loading considerations are required.
Visible components and features: The machine has an exposed drive mechanism and a heavy housing with a central bed area. A crankshaft bearing area and a circular flange secured with bolts are present on the left side of the machine. A lifting eye ring is fitted on the upper left section to assist with lifting/positioning.
Condition notes: External paint is worn in places and there is evidence of surface rust on metal surfaces. Oil/grease staining is present on several areas of the machine. These signs indicate typical workshop service wear and may require cleaning or surface treatment depending on intended use.
Workshop surroundings and safety: There is workshop clutter around the machine (boxes and tools) which represents potential trip hazards during access and handling. Buyers should plan for a clear working area and safe lifting/installation procedures.
What is not stated: No claims are made about operational condition, testing, refurbishment, or warranty. Interested buyers should request further technical inspection, testing records, or run-up information if required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 1159 |
| Last activity | Nov. 7, 2026 |
EN
- Languages
English (GB)