Contact us to receive an offer.
| Manufacturer | SMERAL |
|---|---|
| Model | LEN 63 C |
| Year | 1980 |
| Location | Slovakia
|
| Category | Forging - Eccentric presses |
| Power in tons | 63 T |
| Table length | 800 mm |
| Table width | 610 mm |
| Ram stroke | 105 mm |
| Nbr of strokes/min | 140 |
| Engine Power | 7.5 kW |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Smeral LEN 63 C |
| Last availability date | 05/11/2026 |
| Product id | P261028048 |
| Language |
Ексцентрикова преса SMERAL LEN 63 C
Excentrický lis SMERAL LEN 63 C
SMERAL LEN 63 C Excenterpresse
SMERAL LEN 63 C Exzenterpresse
Εκκεντρική πρέσα SMERAL LEN 63 C
SMERAL LEN 63 C Eccentric press
Prensa excéntrica SMERAL LEN 63 C
Presse excentrique SMERAL LEN 63 C
Ekscentarska preša SMERAL LEN 63 C
SMERAL LEN 63 C Excenteres prés
Pressa eccentrica SMERAL LEN 63 C
SMERAL LEN 63 C Ekscentrinis presas
SMERAL LEN 63 C Excenterpers
Prasa mimośrodowa SMERAL LEN 63 C
Prensa excêntrica SMERAL LEN 63 C
Presă excentrică SMERAL LEN 63 C
SMERAL LEN 63 C Кривошипный пресс
Ekscentarska presa SMERAL LEN 63 C
SMERAL LEN 63 C Excenterpress
Eksantrik pres SMERAL LEN 63 C
|
SMERAL LEN 63 C eccentric press, manufactured in 1980. The machine has a large green and cream housing with a rounded upper section and an exposed working area. A metal table and tooling are positioned beneath the ram. A separate floor-standing control cabinet with switches and pushbuttons is positioned beside the press, and additional pushbuttons are mounted below the table. The control cabinet and visible tooling are described as shown; their operational condition has not been confirmed.
The press shows substantial cosmetic wear. Its paint is chipped and scratched, and surface rust is visible on the front and lower housing, including along the lower frame. The working area is exposed in the views, with no guard visible around the die area. Buyers should assess the machine’s condition and safeguarding requirements for their intended use.
The manufacturer plate identifies the machine as a ŠMERAL TRNAVA LEN 63 C. The equipment is offered as a used industrial press; no claim is made regarding operating condition, testing, or refurbishment.
Offers may be entered until the date and time shown in the listing’s Ends section. If an offer is entered during the final minute, the bidding period is extended by five minutes, allowing further offers to be submitted.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
- deadline: offers can be entered until date and time at Ends section shown on website of the produkt (if any offer is entered in the last minute, it will be always possible to submit new offers in the following 5 minutes)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 96 |
| Last activity | Nov. 7, 2026 |
- deadline: offers can be entered until date and time at Ends section shown on website of the produkt (if any offer is entered in the last minute, it will be always possible to submit new offers in the following 5 minutes)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Forging - Eccentric presses |
| Power in tons | 63 T |
| Table length | 800 mm |
| Table width | 610 mm |
| Ram stroke | 105 mm |
| Nbr of strokes/min | 140 |
| Engine Power | 7.5 kW |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Smeral LEN 63 C |
| Last availability date | 05/11/2026 |
| Product id | P261028048 |
| Language |
Ексцентрикова преса SMERAL LEN 63 C
Excentrický lis SMERAL LEN 63 C
SMERAL LEN 63 C Excenterpresse
SMERAL LEN 63 C Exzenterpresse
Εκκεντρική πρέσα SMERAL LEN 63 C
SMERAL LEN 63 C Eccentric press
Prensa excéntrica SMERAL LEN 63 C
Presse excentrique SMERAL LEN 63 C
Ekscentarska preša SMERAL LEN 63 C
SMERAL LEN 63 C Excenteres prés
Pressa eccentrica SMERAL LEN 63 C
SMERAL LEN 63 C Ekscentrinis presas
SMERAL LEN 63 C Excenterpers
Prasa mimośrodowa SMERAL LEN 63 C
Prensa excêntrica SMERAL LEN 63 C
Presă excentrică SMERAL LEN 63 C
SMERAL LEN 63 C Кривошипный пресс
Ekscentarska presa SMERAL LEN 63 C
SMERAL LEN 63 C Excenterpress
Eksantrik pres SMERAL LEN 63 C
|
SMERAL LEN 63 C eccentric press, manufactured in 1980. The machine has a large green and cream housing with a rounded upper section and an exposed working area. A metal table and tooling are positioned beneath the ram. A separate floor-standing control cabinet with switches and pushbuttons is positioned beside the press, and additional pushbuttons are mounted below the table. The control cabinet and visible tooling are described as shown; their operational condition has not been confirmed.
The press shows substantial cosmetic wear. Its paint is chipped and scratched, and surface rust is visible on the front and lower housing, including along the lower frame. The working area is exposed in the views, with no guard visible around the die area. Buyers should assess the machine’s condition and safeguarding requirements for their intended use.
The manufacturer plate identifies the machine as a ŠMERAL TRNAVA LEN 63 C. The equipment is offered as a used industrial press; no claim is made regarding operating condition, testing, or refurbishment.
Offers may be entered until the date and time shown in the listing’s Ends section. If an offer is entered during the final minute, the bidding period is extended by five minutes, allowing further offers to be submitted.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 96 |
| Last activity | Nov. 7, 2026 |
EN
- Languages
English (GB)