Contact us to receive an offer.
| Manufacturer | SMERAL |
|---|---|
| Model | LE 50 S |
| Year | 1974 |
| Location | Czech Republic
|
Overview:
SMERAL model LE 50 S eccentric press (1974) with listed press force of 50 t. Machine dimensions are 1190 x 1283 x 2200 mm and listed weight is 2560 kg. Other listed specifications include 110 strokes/min, table clamping surface 560 x 475 mm, motor power 4 kW and maximum plate thickness 70 mm. This unit is categorized as a forging / eccentric press.
Mechanical and structural features:
- Large circular flywheel and drive assembly located at the right/rear side of the machine.
- Ram and die area with a die block reportedly mounted on the ram.
- Heavy base and substantial frame consistent with a shop press of this class.
Condition and accessories (observed):
- Paint is worn in multiple areas; there is visible surface rust and grime on the frame, bed and lower areas.
- Work area and machine show signs of a dusty/greasy environment.
- A small lamp and a control box are attached near the ram area (observation confidence moderate).
- Cables and a power cord run across the machine and floor; this was noted as a potential trip/shock hazard (observation confidence moderate).
- Workshop clutter and loose material present near the machine, which may restrict access or require clearing prior to operation (observation confidence low-to-moderate).
- No obvious safety guarding is visible in the view provided; buyer should confirm presence and condition of guards and safety devices.
Notes and buyer recommendations:
- All listed technical values above are taken from the provided machine information; verify these values on-site before purchase.
- Inspect electrical wiring, controls, guarding and the flywheel/drive components for wear, alignment and safe condition.
- Because of visible rust, grime and nearby clutter, a thorough on-site inspection is recommended to assess suitability for immediate use or any required servicing.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
presses/ hammers
excentric press
Machine dimensions : 1190 x 1283 x 2200 mm
Press Force: 50 t
Number Of Strokes: 110 / min
Table Clamping Surface: 560 x 475 mm
Motor Power: 4 kW
Plate Thickness: 70 mm
Machine Weight: 2560 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 1159 |
| Last activity | Nov. 7, 2026 |
presses/ hammers
excentric press
Machine dimensions : 1190 x 1283 x 2200 mm
Press Force: 50 t
Number Of Strokes: 110 / min
Table Clamping Surface: 560 x 475 mm
Motor Power: 4 kW
Plate Thickness: 70 mm
Machine Weight: 2560 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview:
SMERAL model LE 50 S eccentric press (1974) with listed press force of 50 t. Machine dimensions are 1190 x 1283 x 2200 mm and listed weight is 2560 kg. Other listed specifications include 110 strokes/min, table clamping surface 560 x 475 mm, motor power 4 kW and maximum plate thickness 70 mm. This unit is categorized as a forging / eccentric press.
Mechanical and structural features:
- Large circular flywheel and drive assembly located at the right/rear side of the machine.
- Ram and die area with a die block reportedly mounted on the ram.
- Heavy base and substantial frame consistent with a shop press of this class.
Condition and accessories (observed):
- Paint is worn in multiple areas; there is visible surface rust and grime on the frame, bed and lower areas.
- Work area and machine show signs of a dusty/greasy environment.
- A small lamp and a control box are attached near the ram area (observation confidence moderate).
- Cables and a power cord run across the machine and floor; this was noted as a potential trip/shock hazard (observation confidence moderate).
- Workshop clutter and loose material present near the machine, which may restrict access or require clearing prior to operation (observation confidence low-to-moderate).
- No obvious safety guarding is visible in the view provided; buyer should confirm presence and condition of guards and safety devices.
Notes and buyer recommendations:
- All listed technical values above are taken from the provided machine information; verify these values on-site before purchase.
- Inspect electrical wiring, controls, guarding and the flywheel/drive components for wear, alignment and safe condition.
- Because of visible rust, grime and nearby clutter, a thorough on-site inspection is recommended to assess suitability for immediate use or any required servicing.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 1159 |
| Last activity | Nov. 7, 2026 |
Ексцентрикова преса SMERAL LE 50 S
Excentrický lis SMERAL LE 50 S
SMERAL LE 50 S Excenterpresse
SMERAL LE 50 S Exzenterpresse
Εκκεντρική πρέσα SMERAL LE 50 S
SMERAL LE 50 S Eccentric press
Prensa excéntrica SMERAL LE 50 S
Presse excentrique SMERAL LE 50 S
Ekscentarska preša SMERAL LE 50 S
SMERAL LE 50 S Excenteres prés
Pressa eccentrica SMERAL LE 50 S
SMERAL LE 50 S Ekscentrinis presas
SMERAL LE 50 S Excenterpers
Prasa mimośrodowa SMERAL LE 50 S
Prensa excêntrica SMERAL LE 50 S
Presă excentrică SMERAL LE 50 S
SMERAL LE 50 S Кривошипный пресс
Ekscentarska presa SMERAL LE 50 S
SMERAL LE 50 S Excenterpress
Eksantrik pres SMERAL LE 50 S
EN
- Languages
English (GB)