Contact us to receive an offer.
| Manufacturer | SIMPLEX RAPID |
|---|---|
| Model | A/2-S/93 A2S A2 93S |
| Year | 1998 |
| Location | Poland
|
SIMPLEX RAPID A/2-S/93 (also identified as A2S A2 93S), an automatic machine for producing compression springs. The listed year of manufacture is 1998. The specified wire diameter is 5.0 mm, and the listed feed length is 67,000 mm. The current description gives a wire working range of 1.0–5.0 mm, a maximum spring diameter of 85 mm and a production speed of up to 160 springs per minute. It describes the machine as using a flying, rotating cut-off system and continuous wire feeding during production.
The machine has multiple rollers, forming tools and adjustment wheels, together with control panels featuring colored buttons. A circular wire payoff reel and wire feed guide are positioned to the left of the machine. The front panel bears the SIMPLEX-RAPID MILANO name. The machine is shown on a pallet, with visible paint wear and surface marks.
Listed overall dimensions are 1,550 × 1,350 × 1,750 mm (length × width × height), and the listed weight is 2,230 kg. The current description also identifies a mechanical cam-controlled design and automatic central lubrication. These details describe the machine’s stated configuration; operating condition is not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
SIMPLEX RAPID A/2-S/93 – High-Speed Compression Spring Coiling Machine
Manufacturer: SIMPLEX RAPID
Model: A/2-S/93
Machine type: Automatic compression spring coiling machine
Wire diameter: 1.0–5.0 mm
Maximum spring diameter: 85 mm
Production speed: up to 160 springs/min
Cutting system: Flying / rotating cut-off
The SIMPLEX RAPID A/2-S/93 is a high-speed automatic spring coiling machine designed specifically for the production of compression springs. Historical technical documentation lists the A/2-S/93 with a wire working range of 1.0–5.0 mm, a maximum coil diameter of 85 mm and a production rate of up to 160 springs per minute. I
A characteristic feature of the A/2 series is the SIMPLEX RAPID flying cut-off system. During production, the wire feed continues at constant speed while the finished spring is separated by a rotating cutting knife. This eliminates the need to stop the wire feed for every cutting cycle and was developed for high-speed, repetitive spring production. Historical patent documentation explicitly identifies the A/2-S/93 as one of the SIMPLEX RAPID machines using this system.
Technical Features
Wire diameter range: 1.0–5.0 mm
Maximum spring outside diameter: 85 mm
Production speed: up to 160 springs/min
Designed for compression spring production
Continuous wire feeding during production
Flying / rotating cut-off system
Mechanical cam-controlled machine design
Automatic central lubrication
Robust mechanical construction for repetitive production
Drive power: approximately 12 HP
Approximate floor space: 1400 × 3500 mm
Flying Cut-Off System
The SIMPLEX RAPID cutting principle allows the spring to be cut while the wire is still being continuously fed. The rotating knife follows a circular cutting movement and separates the finished spring without requiring the feed mechanism to stop.
This system provides several practical advantages:
Reduced non-productive time between springs
Continuous wire feed during the production cycle
Reduced starting and stopping of the feed mechanism
Lower mechanical load on feeding components
Suitable for high-volume production
Reduced tooling wear compared with conventional stop-and-cut systems
The rotating cut-off principle became one of the characteristic features of the SIMPLEX RAPID A/2 machine family.
Typical Applications
The machine is particularly suitable for the production of:
Compression springs
Valve springs
Clutch springs
Injector springs
Technical compression springs
Cylindrical compression springs
Springs with variable pitch
Medium-diameter wire springs for serial and mass production
Machine Advantages
Proven SIMPLEX RAPID mechanical design
High production speed
Wire capacity up to 5.0 mm
Maximum spring diameter up to 85 mm
Continuous wire feed
SIMPLEX RAPID flying cut-off system
Reduced production interruptions during cutting
Heavy-duty construction intended for serial production
Automatic central lubrication
Particularly suitable for repetitive production of compression springs
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2021 |
| Offers online | 1 |
| Last activity | Nov. 4, 2026 |
SIMPLEX RAPID A/2-S/93 – High-Speed Compression Spring Coiling Machine
Manufacturer: SIMPLEX RAPID
Model: A/2-S/93
Machine type: Automatic compression spring coiling machine
Wire diameter: 1.0–5.0 mm
Maximum spring diameter: 85 mm
Production speed: up to 160 springs/min
Cutting system: Flying / rotating cut-off
The SIMPLEX RAPID A/2-S/93 is a high-speed automatic spring coiling machine designed specifically for the production of compression springs. Historical technical documentation lists the A/2-S/93 with a wire working range of 1.0–5.0 mm, a maximum coil diameter of 85 mm and a production rate of up to 160 springs per minute. I
A characteristic feature of the A/2 series is the SIMPLEX RAPID flying cut-off system. During production, the wire feed continues at constant speed while the finished spring is separated by a rotating cutting knife. This eliminates the need to stop the wire feed for every cutting cycle and was developed for high-speed, repetitive spring production. Historical patent documentation explicitly identifies the A/2-S/93 as one of the SIMPLEX RAPID machines using this system.
Technical Features
Wire diameter range: 1.0–5.0 mm
Maximum spring outside diameter: 85 mm
Production speed: up to 160 springs/min
Designed for compression spring production
Continuous wire feeding during production
Flying / rotating cut-off system
Mechanical cam-controlled machine design
Automatic central lubrication
Robust mechanical construction for repetitive production
Drive power: approximately 12 HP
Approximate floor space: 1400 × 3500 mm
Flying Cut-Off System
The SIMPLEX RAPID cutting principle allows the spring to be cut while the wire is still being continuously fed. The rotating knife follows a circular cutting movement and separates the finished spring without requiring the feed mechanism to stop.
This system provides several practical advantages:
Reduced non-productive time between springs
Continuous wire feed during the production cycle
Reduced starting and stopping of the feed mechanism
Lower mechanical load on feeding components
Suitable for high-volume production
Reduced tooling wear compared with conventional stop-and-cut systems
The rotating cut-off principle became one of the characteristic features of the SIMPLEX RAPID A/2 machine family.
Typical Applications
The machine is particularly suitable for the production of:
Compression springs
Valve springs
Clutch springs
Injector springs
Technical compression springs
Cylindrical compression springs
Springs with variable pitch
Medium-diameter wire springs for serial and mass production
Machine Advantages
Proven SIMPLEX RAPID mechanical design
High production speed
Wire capacity up to 5.0 mm
Maximum spring diameter up to 85 mm
Continuous wire feed
SIMPLEX RAPID flying cut-off system
Reduced production interruptions during cutting
Heavy-duty construction intended for serial production
Automatic central lubrication
Particularly suitable for repetitive production of compression springs
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
SIMPLEX RAPID A/2-S/93 (also identified as A2S A2 93S), an automatic machine for producing compression springs. The listed year of manufacture is 1998. The specified wire diameter is 5.0 mm, and the listed feed length is 67,000 mm. The current description gives a wire working range of 1.0–5.0 mm, a maximum spring diameter of 85 mm and a production speed of up to 160 springs per minute. It describes the machine as using a flying, rotating cut-off system and continuous wire feeding during production.
The machine has multiple rollers, forming tools and adjustment wheels, together with control panels featuring colored buttons. A circular wire payoff reel and wire feed guide are positioned to the left of the machine. The front panel bears the SIMPLEX-RAPID MILANO name. The machine is shown on a pallet, with visible paint wear and surface marks.
Listed overall dimensions are 1,550 × 1,350 × 1,750 mm (length × width × height), and the listed weight is 2,230 kg. The current description also identifies a mechanical cam-controlled design and automatic central lubrication. These details describe the machine’s stated configuration; operating condition is not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2021 |
| Offers online | 1 |
| Last activity | Nov. 4, 2026 |
Машина за пружини SIMPLEX RAPID A/2-S/93 A2S A2 93S
Stroj na výrobu pružin SIMPLEX RAPID A/2-S/93 A2S A2 93S
SIMPLEX RAPID A/2-S/93 A2S A2 93S Fjedermaskine
SIMPLEX RAPID A/2-S/93 A2S A2 93S Federmaschine
Μηχανή ελατηρίων SIMPLEX RAPID A/2-S/93 A2S A2 93S
SIMPLEX RAPID A/2-S/93 A2S A2 93S Spring machine
Máquina para resortes SIMPLEX RAPID A/2-S/93 A2S A2 93S
Machine à ressorts SIMPLEX RAPID A/2-S/93 A2S A2 93S
Stroj za opruge SIMPLEX RAPID A/2-S/93 A2S A2 93S
SIMPLEX RAPID A/2-S/93 A2S A2 93S Rugógyártó gép
Macchina per molle SIMPLEX RAPID A/2-S/93 A2S A2 93S
SIMPLEX RAPID A/2-S/93 A2S A2 93S Spyruoklių gamybos staklės
SIMPLEX RAPID A/2-S/93 A2S A2 93S Verenmachine
Maszyna do sprężyn SIMPLEX RAPID A/2-S/93 A2S A2 93S
Máquina para molas SIMPLEX RAPID A/2-S/93 A2S A2 93S
Mașină pentru arcuri SIMPLEX RAPID A/2-S/93 A2S A2 93S
SIMPLEX RAPID A/2-S/93 A2S A2 93S Пружинный автомат
Mašina za opruge SIMPLEX RAPID A/2-S/93 A2S A2 93S
SIMPLEX RAPID A/2-S/93 A2S A2 93S Fjädermaskin
Yay makinesi SIMPLEX RAPID A/2-S/93 A2S A2 93S
EN
- Languages
English (GB)