SIG Cantec Can-O-Mat I Packaging machine

Verified seller

Price on request

Make an offer
  • - Secured payment for the purchase
  • - Dedicated compliance check of the seller
  • - Logistics and customs support if applicable
  • - After-sale follow up if needed

Contact us to receive an offer.

Manufacturer SIG Cantec
Model Can-O-Mat I
Year 2005
Location Netherlands NL
Loick
Your dedicated contact
Loick L.

Automatic description (AI-Generated)

SIG Cantec Can-O-Mat I multi-station can body forming machine, manufactured in 2005. Designed for finishing welded can bodies in three-piece can production, this modular combination machine can be configured to neck the body, spin-flange both ends, roll beads and seam an end in a single pass. The available station configuration, can diameter, tooling and output depend on the machine setup; these details are available on request.

The machine has a tall enclosed housing with transparent access windows and doors, through which internal metal mechanisms can be seen. A red emergency-stop button is mounted on the lower front-side panel. A motor or pump assembly with connected hoses and cables is visible near the lower side. A separate blue-and-white SIG electrical cabinet is also shown, with a ventilation grille, a small display and control area, a keyed switch and a rotary isolator. Its inclusion with the machine is not specified.

The exterior has visible surface dirt, smudges and scuffs, including worn or peeling finish on a blue panel and wear around a lower access opening. The machine is offered as used equipment; its operating condition is not stated. Station configuration, can diameter, tooling and output can be discussed on request. Price on request.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

Seller's description

SIG Cantec Can-O-Mat I multi-station can body forming machine, built 2005. Modular combination machine for finishing welded can bodies in three-piece can production. Depending on the configuration it necks the body, spin-flanges both ends, rolls beads and seams on an end in a single pass. Station configuration, can diameter / tooling and output on request. Price on request.

Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.


Client type Machinery dealer
Active since 2026
Offers online 23
Last activity Nov. 19, 2026

Seller's description

SIG Cantec Can-O-Mat I multi-station can body forming machine, built 2005. Modular combination machine for finishing welded can bodies in three-piece can production. Depending on the configuration it necks the body, spin-flanges both ends, rolls beads and seams on an end in a single pass. Station configuration, can diameter / tooling and output on request. Price on request.

Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.



Automatic description (AI-Generated)

SIG Cantec Can-O-Mat I multi-station can body forming machine, manufactured in 2005. Designed for finishing welded can bodies in three-piece can production, this modular combination machine can be configured to neck the body, spin-flange both ends, roll beads and seam an end in a single pass. The available station configuration, can diameter, tooling and output depend on the machine setup; these details are available on request.

The machine has a tall enclosed housing with transparent access windows and doors, through which internal metal mechanisms can be seen. A red emergency-stop button is mounted on the lower front-side panel. A motor or pump assembly with connected hoses and cables is visible near the lower side. A separate blue-and-white SIG electrical cabinet is also shown, with a ventilation grille, a small display and control area, a keyed switch and a rotary isolator. Its inclusion with the machine is not specified.

The exterior has visible surface dirt, smudges and scuffs, including worn or peeling finish on a blue panel and wear around a lower access opening. The machine is offered as used equipment; its operating condition is not stated. Station configuration, can diameter, tooling and output can be discussed on request. Price on request.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.


About this seller

Client type Machinery dealer
Active since 2026
Offers online 23
Last activity Nov. 19, 2026

Here is a selection of similar machines - SIG Cantec Can-O-Mat I


Used Packaging Machines in the Netherlands for Sale

Browse used packaging machines located in the Netherlands on Exapro: flow wrappers, tray sealers, vertical baggers, cartoners, case packers, labellers and palletisers from Dutch food, dairy and logistics companies. Filter by machine type, format and output.

SIG Cantec Can-O-Mat I Packaging machine