Contact us to receive an offer.
| Manufacturer | SCM |
|---|---|
| Model | 110cm |
| Year | |
| Location | Slovenia
|
| Category | Sanding - Wide belt sanders |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Last availability date | 04/09/2026 |
| Product id | P260713015 |
| Language |
Шмиргел с широка лента SCM 110cm
Širokopásová bruska SCM 110cm
SCM 110cm Bred båndsliber
SCM 110cm Breitbandschleifmaschine
Φαρδύ ταινιοτριβείο SCM 110cm
SCM 110cm Wide belt sander
Lijadora calibradora de banda larga SCM 110cm
Ponceuse calibreuse large bande SCM 110cm
Brusilica sa širokom trakom SCM 110cm
SCM 110cm Széles szalagcsiszoló
Calibratrice levigatrice SCM 110cm
SCM 110cm Plačiajuostis šlifuoklis
SCM 110cm Brede bandschuurmachine
Szlifierka szerokotaśmowa SCM 110cm
Lixadeira de cinta larga SCM 110cm
Slefuitor cu bandă lată SCM 110cm
SCM 110cm Широкий шлифовальный станок по дереву
Široka trakasta brusilica SCM 110cm
SCM 110cm Bred bandslipmaskin
Geniş bant zımpara makinası SCM 110cm
|
SCM 110cm wide-belt sander. Configured with two sanding drum assemblies and a textured conveyor/roller pad, suitable for sanding applications such as veneer and varnish preparation. The machine bears an SCM cabinet logo and is a large enclosed unit designed for continuous belt sanding.
Key components and controls:
- Vertical control panel mounted on the left side with multiple colored push buttons and meters.
- Two red upper drum housings with multiple hoses and pneumatic fittings; a pressure regulator/filter with gauge is installed between the two red units. Handwritten markings on the red top pieces read "3÷4 atm."
- Two sanding drums with hand adjustment wheels on the drum ends, indexing plates and locking clamps for drum positioning. Rotating shafts and support arms are present above the drums. Metal divider plates separate the drum assemblies.
- Front/mid-height textured conveyor drum and internal support structure including cast support blocks and base rails. An electric motor/gearbox is mounted at the lower left front of the machine.
- Top dust outlet ports and lifting eye rings on the upper corners. A handwheel is fitted on the right side of the upper cabinet for adjustment.
Condition and notes:
- Cabinet and base exhibit paint wear, scratches, chips, stains and surface dirt. Sanding drums and internal areas show surface wear, accumulated dust and residue. Dust, sanding residue and liquid stains are present around the drum/base area and inside panels.
- A small loose round metal part is present on the base between the drums.
This description lists observed components and visible condition only. No claims are made regarding operational status, testing, or refurbishment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
SCM 110 cm Sander
2 rollers + pad
Suitable for veneer and varnish
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 11 |
| Last activity | Nov. 1, 2026 |
SCM 110 cm Sander
2 rollers + pad
Suitable for veneer and varnish
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Sanding - Wide belt sanders |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Last availability date | 04/09/2026 |
| Product id | P260713015 |
| Language |
Шмиргел с широка лента SCM 110cm
Širokopásová bruska SCM 110cm
SCM 110cm Bred båndsliber
SCM 110cm Breitbandschleifmaschine
Φαρδύ ταινιοτριβείο SCM 110cm
SCM 110cm Wide belt sander
Lijadora calibradora de banda larga SCM 110cm
Ponceuse calibreuse large bande SCM 110cm
Brusilica sa širokom trakom SCM 110cm
SCM 110cm Széles szalagcsiszoló
Calibratrice levigatrice SCM 110cm
SCM 110cm Plačiajuostis šlifuoklis
SCM 110cm Brede bandschuurmachine
Szlifierka szerokotaśmowa SCM 110cm
Lixadeira de cinta larga SCM 110cm
Slefuitor cu bandă lată SCM 110cm
SCM 110cm Широкий шлифовальный станок по дереву
Široka trakasta brusilica SCM 110cm
SCM 110cm Bred bandslipmaskin
Geniş bant zımpara makinası SCM 110cm
|
SCM 110cm wide-belt sander. Configured with two sanding drum assemblies and a textured conveyor/roller pad, suitable for sanding applications such as veneer and varnish preparation. The machine bears an SCM cabinet logo and is a large enclosed unit designed for continuous belt sanding.
Key components and controls:
- Vertical control panel mounted on the left side with multiple colored push buttons and meters.
- Two red upper drum housings with multiple hoses and pneumatic fittings; a pressure regulator/filter with gauge is installed between the two red units. Handwritten markings on the red top pieces read "3÷4 atm."
- Two sanding drums with hand adjustment wheels on the drum ends, indexing plates and locking clamps for drum positioning. Rotating shafts and support arms are present above the drums. Metal divider plates separate the drum assemblies.
- Front/mid-height textured conveyor drum and internal support structure including cast support blocks and base rails. An electric motor/gearbox is mounted at the lower left front of the machine.
- Top dust outlet ports and lifting eye rings on the upper corners. A handwheel is fitted on the right side of the upper cabinet for adjustment.
Condition and notes:
- Cabinet and base exhibit paint wear, scratches, chips, stains and surface dirt. Sanding drums and internal areas show surface wear, accumulated dust and residue. Dust, sanding residue and liquid stains are present around the drum/base area and inside panels.
- A small loose round metal part is present on the base between the drums.
This description lists observed components and visible condition only. No claims are made regarding operational status, testing, or refurbishment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 11 |
| Last activity | Nov. 1, 2026 |
Poland
2021
| Working width | 1350 mm |
|---|
| Total installed power | 7.5 kW |
|---|
Belgium
2008
| Working width | 1350 mm |
|---|---|
| Total installed power | 49 kW |
| Max thickness | 170 mm |
|---|
Turkey
2015
| Working width | 1300 mm |
|---|---|
| Type | Top |
| Max thickness | 110 mm |
|---|
Poland
1998
| Working width | 900 mm |
|---|---|
| Type | Top |
| Total installed power | 11 kW |
| Max thickness | 160 mm |
|---|---|
| Nbr of units | 2 |
Poland
2011
| Working width | 1350 mm |
|---|---|
| Nbr of units | 6 |
| Max thickness | 170 mm |
|---|
| Working width | 1100 mm |
|---|
Poland
2001
| Working width | 1100 mm |
|---|---|
| Type | Top |
| Total installed power | 11 kW |
| Max thickness | 160 mm |
|---|---|
| Nbr of units | 2 |
Spain
2005
| Working width | 950 mm |
|---|---|
| Type | Top |
| Total installed power | 11 kW |
| Max thickness | 160 mm |
|---|---|
| Nbr of units | 2 |
| Working width | 1350 mm |
|---|---|
| Type | Top |
| Max thickness | 200 mm |
|---|---|
| Nbr of units | 5 |
Poland
2005
| Working width | 950 mm |
|---|---|
| Type | Top |
| Total installed power | 11 kW |
| Max thickness | 140 mm |
|---|---|
| Nbr of units | 3 |
| Working width | 1100 mm |
|---|---|
| Total installed power | 18.5 kW |
| Nbr of units | 3 |
|---|
| Working width | 1100 mm |
|---|---|
| Nbr of units | 2 |
| Max thickness | 160 mm |
|---|---|
| Total installed power | 33 kW |
Italy
2000
| Working width | 1100 mm |
|---|---|
| Type | Top |
| Total installed power | 15 kW |
| Max thickness | 140 mm |
|---|---|
| Nbr of units | 3 |
Russia
2001
| Working width | 1350 mm |
|---|---|
| Type | Top |
| Total installed power | 12 kW |
| Max thickness | 140 mm |
|---|---|
| Nbr of units | 3 |
Romania
Portugal
China
Belarus
EN
- Languages
English (GB)