Contact us to receive an offer.
| Category | Energy - Compressors |
| Nominal Pressure | 9 bar |
| Output (m3 /hour) | 120 m³/h |
| Engine power | 15 kW |
| Volts | 400 V |
| Frequency | 50 Hz |
| Sound level | 65 dB(A) |
| Length x width x height | 1200.0 × 800.0 × 1200.0 |
| Weight | 350 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Schneider AirMaster AM 15 |
| Last availability date | 05/11/2026 |
| Product id | P261105176 |
| Language |
Used Schneider Airsystems screw compressor, model AirMaster AM K 15-10, with enclosed gray and yellow cabinet. The front is fitted with a digital control panel and a red rotary switch. The control display reads “OFF” in the available view; this does not indicate that the machine has been tested or confirmed operational. An open electrical cabinet view shows wiring and electrical components, including circuit breakers, fuses, a transformer, terminal blocks and a relay. A ventilation grille is fitted to one of the machine panels. Service papers and a document pouch are also present.
Specifications:
- Motor power: 15 kW
- Nominal operating pressure: 9 bar
- Maximum discharge pressure: 10 bar
- Air delivery: 120 m³/h (2,000 l/min) at 9 bar operating pressure
- Electrical supply: 400 V, 50 Hz, three-phase
- Sound pressure level: 65 dB(A)
- Transport dimensions (L × W × H): approx. 1,200 × 800 × 1,200 mm
- Weight: approx. 350 kg
- Control: AIRBASIC 2
The compressor is shown strapped to a wooden pallet, with a flat board resting on top. The board has visible edge wear. Technical documentation is stated to be available. An on-site inspection by appointment is possible and recommended.
Sold as seen/as is, with no warranty for used machines. Technical specifications, condition details, year of construction and scope of delivery are stated to be based on the manufacturer’s brochure or previous owner and are provided without guarantee. Prices are plus VAT; payment is due before collection or shipment. Delivery is ex warehouse. The seller’s general terms and conditions apply, including the provisions concerning complaints and returns.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Screw compressor Schneider AirMaster AM K 15-10
Used
Motor power 15 kW
Max. discharge pressure 10 bar
Air delivery 2000 l/min (120 m3/h) at 9 bar operating pressure
Sound pressure level 65 dB(A)
Power supply 400 V / 50 Hz / 3-phase
Electronic control AIRBASIC 2
Technical documentation available
Transport dimensions approx. 1200 x 800 x 1200 mm LWH
Weight approx. 350 kg
To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended
Sold as is
Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee
Subject to prior sale
For used machines, any warranty is excluded, the following applies: “sold as seen”
Payment terms: Prices plus VAT, payment before collection or shipment
Delivery terms: ex warehouse
Our General Terms and Conditions apply, available online at
Please pay particular attention to Article 9 concerning complaints and returns!
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 16 |
| Last activity | Nov. 6, 2026 |
Screw compressor Schneider AirMaster AM K 15-10
Used
Motor power 15 kW
Max. discharge pressure 10 bar
Air delivery 2000 l/min (120 m3/h) at 9 bar operating pressure
Sound pressure level 65 dB(A)
Power supply 400 V / 50 Hz / 3-phase
Electronic control AIRBASIC 2
Technical documentation available
Transport dimensions approx. 1200 x 800 x 1200 mm LWH
Weight approx. 350 kg
To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended
Sold as is
Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee
Subject to prior sale
For used machines, any warranty is excluded, the following applies: “sold as seen”
Payment terms: Prices plus VAT, payment before collection or shipment
Delivery terms: ex warehouse
Our General Terms and Conditions apply, available online at
Please pay particular attention to Article 9 concerning complaints and returns!
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Energy - Compressors |
| Nominal Pressure | 9 bar |
| Output (m3 /hour) | 120 m³/h |
| Engine power | 15 kW |
| Volts | 400 V |
| Frequency | 50 Hz |
| Sound level | 65 dB(A) |
| Length x width x height | 1200.0 × 800.0 × 1200.0 |
| Weight | 350 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Schneider AirMaster AM 15 |
| Last availability date | 05/11/2026 |
| Product id | P261105176 |
| Language |
Used Schneider Airsystems screw compressor, model AirMaster AM K 15-10, with enclosed gray and yellow cabinet. The front is fitted with a digital control panel and a red rotary switch. The control display reads “OFF” in the available view; this does not indicate that the machine has been tested or confirmed operational. An open electrical cabinet view shows wiring and electrical components, including circuit breakers, fuses, a transformer, terminal blocks and a relay. A ventilation grille is fitted to one of the machine panels. Service papers and a document pouch are also present.
Specifications:
- Motor power: 15 kW
- Nominal operating pressure: 9 bar
- Maximum discharge pressure: 10 bar
- Air delivery: 120 m³/h (2,000 l/min) at 9 bar operating pressure
- Electrical supply: 400 V, 50 Hz, three-phase
- Sound pressure level: 65 dB(A)
- Transport dimensions (L × W × H): approx. 1,200 × 800 × 1,200 mm
- Weight: approx. 350 kg
- Control: AIRBASIC 2
The compressor is shown strapped to a wooden pallet, with a flat board resting on top. The board has visible edge wear. Technical documentation is stated to be available. An on-site inspection by appointment is possible and recommended.
Sold as seen/as is, with no warranty for used machines. Technical specifications, condition details, year of construction and scope of delivery are stated to be based on the manufacturer’s brochure or previous owner and are provided without guarantee. Prices are plus VAT; payment is due before collection or shipment. Delivery is ex warehouse. The seller’s general terms and conditions apply, including the provisions concerning complaints and returns.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 16 |
| Last activity | Nov. 6, 2026 |