| Manufacturer | SAMAG |
|---|---|
| Model | MFZ 2-3 |
| Year | 2008 |
| Location | Germany
|
This SAMAG MFZ 2-3 horizontal machining center, manufactured in 2008, is designed for precise and efficient machining tasks. It features a robust enclosed work area with red window frames, providing a safe and controlled environment for operations. The machine measures approximately 6100 mm in length, 5450 mm in width, and 3050 mm in height, with a total weight of around 20,000 kg.
The machining center is equipped with a spindle motor delivering 28 kW of power and supports spindle speeds up to 16,000 rpm, suitable for a wide range of machining applications. It includes a tool magazine with 90 positions, allowing for efficient tool changes and extended machining runs. The working area dimensions and rapid traverse speeds are consistent with high productivity standards, although specific working area details are not confirmed here.
The machine's exterior shows minor wear and some dirt marks, indicating typical usage but no visible damage, and it appears well maintained overall. Multiple access panels with handles are located on the sides, facilitating maintenance and service. Hydraulic or pneumatic lines are visible at the top rear, suggesting integrated fluid systems necessary for operation.
A control panel with a keypad and emergency stop button is mounted on the right side of the front door, offering operational control and safety. Additionally, a warning light is mounted on top of the machine to signal operational status. The electrical cabinet labeled SA024 houses ventilation grilles, switches, and warning labels, with its doors intact and showing minor marks and some dirt near the base.
This SAMAG MFZ 2-3 machining center is a solid option for industrial machining environments requiring a reliable, high-speed horizontal machining center with comprehensive tool handling capabilities and user safety features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis SAMAG MFZ 2-3 was manufactured in 2008. It features a working area of 300x500x450 mm, rapid traverse speeds up to 60 m/min, and a tool magazine with 90 positions. The spindle supports a speed range of 50 to 16,000 rpm with a drive power of 28 kW. Ideal for high precision and efficiency in machining tasks. Contact us for more information about this machine.
Measurements width: 6100 mm
Measurements depth: 5450 mm
Measurements height: 2800/3050 mm
Machine weight: 20000 kg
Brand: SIEMENS
Model: Sinumerik
Spindle speed range: 50 - 16000 rpm
Spindle motor power: 28 kW
Max weight: 6 kg
Max tool diameter: 160 mm
Max tool length: 320 mm
Type of tool holder: HSK-A63
Required installation space (length x width): approx. 5950 mm x 6700 mm
Weight (kg) including coolant system and chip conveyor: approx. 25000 kg
Operating voltage: 400 v 3 n~ 50 hz
Control/valve voltage: 24 v dc
Machine power rating: approx. 82 kva
Back-up fuse before main switch: 3 x 160 a
Connector cross-section: 70 mm²Ott Tool Clamping System
Torque (S1/S6): 63/83 Nm
Nominal Speed: 4200 rpm
Spindle Bearing Diameter: 70 mm
Spindle Lubrication: Lifetime grease lubrication
1 Horizontal 180° swivel support (W-axis)
Faceplate Diameter (NC drive/counter bearing): 500/345 mm
Permissible Tangential Torque: 15000 Nm
Positioning Accuracy: ±3 angular seconds
Swivel Time (0°/180°): Approx. 6 s
Number of Horizontal 360° Workpiece Support Axes
Positioning via Face Gearing: 120 x 3°
Positioning Accuracy (120 x 3°): ±3 arc seconds
Max. Transport Load per A-axis: Approx. 600 kg
Permissible Tangential Torque: 5000 Nm
Working Area (interference circle x length): Ø700 x 940 (1036) mm
Approaching Intermediate Positions Outside the 3° Pitch: Possible (NC position control)
Positioning Accuracy: ±25 angular seconds
Permissible Tangential Torque: 1000 Nm
Tool Magazine: 90 tool positions (3 x 30)
Max. Tool Diameter with Free Adjacent Positions: 160 mm
Cut-to-Cut Time (within 1 cartridge): Approx. 5.2 s
Media
Hydraulic Unit Capacity: 160 l
Max. Operating Pressure: 160 bar
Max. Flow Rate: 12 l/min
Pneumatic System: Required Compressed Air Connection, Required Air Consumption (short-term) 6 ± 0.5 bar
Factory Air Quality: Class 545 according to DIN-ISO 8573-1
Coolant System: Knoll coolant system with coolant cooling
Coolant Tank Capacity: Max. 1400 l
Separate Machine Bed Flushing: 160 l/min at 2.6 bar
External Tool Cooling and Various Flushing Functions: 120 l/min at 3.5 bar
Internal Tool Cooling Through the Spindles: 40 l/min at 60 bar
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2052 |
| Last activity | Nov. 5, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis SAMAG MFZ 2-3 was manufactured in 2008. It features a working area of 300x500x450 mm, rapid traverse speeds up to 60 m/min, and a tool magazine with 90 positions. The spindle supports a speed range of 50 to 16,000 rpm with a drive power of 28 kW. Ideal for high precision and efficiency in machining tasks. Contact us for more information about this machine.
Measurements width: 6100 mm
Measurements depth: 5450 mm
Measurements height: 2800/3050 mm
Machine weight: 20000 kg
Brand: SIEMENS
Model: Sinumerik
Spindle speed range: 50 - 16000 rpm
Spindle motor power: 28 kW
Max weight: 6 kg
Max tool diameter: 160 mm
Max tool length: 320 mm
Type of tool holder: HSK-A63
Required installation space (length x width): approx. 5950 mm x 6700 mm
Weight (kg) including coolant system and chip conveyor: approx. 25000 kg
Operating voltage: 400 v 3 n~ 50 hz
Control/valve voltage: 24 v dc
Machine power rating: approx. 82 kva
Back-up fuse before main switch: 3 x 160 a
Connector cross-section: 70 mm²Ott Tool Clamping System
Torque (S1/S6): 63/83 Nm
Nominal Speed: 4200 rpm
Spindle Bearing Diameter: 70 mm
Spindle Lubrication: Lifetime grease lubrication
1 Horizontal 180° swivel support (W-axis)
Faceplate Diameter (NC drive/counter bearing): 500/345 mm
Permissible Tangential Torque: 15000 Nm
Positioning Accuracy: ±3 angular seconds
Swivel Time (0°/180°): Approx. 6 s
Number of Horizontal 360° Workpiece Support Axes
Positioning via Face Gearing: 120 x 3°
Positioning Accuracy (120 x 3°): ±3 arc seconds
Max. Transport Load per A-axis: Approx. 600 kg
Permissible Tangential Torque: 5000 Nm
Working Area (interference circle x length): Ø700 x 940 (1036) mm
Approaching Intermediate Positions Outside the 3° Pitch: Possible (NC position control)
Positioning Accuracy: ±25 angular seconds
Permissible Tangential Torque: 1000 Nm
Tool Magazine: 90 tool positions (3 x 30)
Max. Tool Diameter with Free Adjacent Positions: 160 mm
Cut-to-Cut Time (within 1 cartridge): Approx. 5.2 s
Media
Hydraulic Unit Capacity: 160 l
Max. Operating Pressure: 160 bar
Max. Flow Rate: 12 l/min
Pneumatic System: Required Compressed Air Connection, Required Air Consumption (short-term) 6 ± 0.5 bar
Factory Air Quality: Class 545 according to DIN-ISO 8573-1
Coolant System: Knoll coolant system with coolant cooling
Coolant Tank Capacity: Max. 1400 l
Separate Machine Bed Flushing: 160 l/min at 2.6 bar
External Tool Cooling and Various Flushing Functions: 120 l/min at 3.5 bar
Internal Tool Cooling Through the Spindles: 40 l/min at 60 bar
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This SAMAG MFZ 2-3 horizontal machining center, manufactured in 2008, is designed for precise and efficient machining tasks. It features a robust enclosed work area with red window frames, providing a safe and controlled environment for operations. The machine measures approximately 6100 mm in length, 5450 mm in width, and 3050 mm in height, with a total weight of around 20,000 kg.
The machining center is equipped with a spindle motor delivering 28 kW of power and supports spindle speeds up to 16,000 rpm, suitable for a wide range of machining applications. It includes a tool magazine with 90 positions, allowing for efficient tool changes and extended machining runs. The working area dimensions and rapid traverse speeds are consistent with high productivity standards, although specific working area details are not confirmed here.
The machine's exterior shows minor wear and some dirt marks, indicating typical usage but no visible damage, and it appears well maintained overall. Multiple access panels with handles are located on the sides, facilitating maintenance and service. Hydraulic or pneumatic lines are visible at the top rear, suggesting integrated fluid systems necessary for operation.
A control panel with a keypad and emergency stop button is mounted on the right side of the front door, offering operational control and safety. Additionally, a warning light is mounted on top of the machine to signal operational status. The electrical cabinet labeled SA024 houses ventilation grilles, switches, and warning labels, with its doors intact and showing minor marks and some dirt near the base.
This SAMAG MFZ 2-3 machining center is a solid option for industrial machining environments requiring a reliable, high-speed horizontal machining center with comprehensive tool handling capabilities and user safety features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2052 |
| Last activity | Nov. 5, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Хоризонтален обработващ център SAMAG MFZ 2-3
Horizontální obráběcí centrum SAMAG MFZ 2-3
SAMAG MFZ 2-3 Vandret bearbejdningscenter
SAMAG MFZ 2-3 Horizontales Bearbeitungszentrum
Οριζόντιο κέντρο κατεργασίας SAMAG MFZ 2-3
SAMAG MFZ 2-3 Horizontal machining center
Centro de mecanizado horizontal SAMAG MFZ 2-3
Centre d'usinage horizontal SAMAG MFZ 2-3
Horizontalni obradni centar SAMAG MFZ 2-3
SAMAG MFZ 2-3 Vízszintes megmunkáló központ
Centro di lavoro orizzontale SAMAG MFZ 2-3
Horizontalus apdirbimo centras SAMAG MFZ 2-3
SAMAG MFZ 2-3 Horizontaal bewerkingscentrum
Centrum obróbcze poziome SAMAG MFZ 2-3
Centro de maquinação horizontal SAMAG MFZ 2-3
Centru de prelucrare orizontal SAMAG MFZ 2-3
SAMAG MFZ 2-3 Горизонтальный обрабатывающий центр
Horizontalni obradni centar SAMAG MFZ 2-3
SAMAG MFZ 2-3 Horisontellt bearbetningscenter
Yatay işleme merkezi SAMAG MFZ 2-3
EN
- Languages
English (GB)