| Manufacturer | Salvalgnini |
|---|---|
| Model | B2-170-4000 |
| Year | 2013 |
| Location | Italy
|
Salvagnini B2-170-4000 Syncro CNC press brake, manufacturer Salvagnini, year of manufacture 2013. Capacity and size: 170 T pressing force and 4,000 mm bending (folding) length. Controlled axes: 4 (Y1, Y2, X, R). Crowning: automatic Wila crowning. CNC control: BECKHOFF-branded operator touchscreen/control interface and conventional control panel with emergency stop and rotary controls. CE compliant. Condition: used. Visible surface wear is present on the front ram and lower beam, including scratches, scuffs, some dents and paint chipping; these items should be examined in person prior to purchase. Tooling and clamping: upper and lower tooling are included; the machine is equipped with segmented clamp blocks along the bed and a quick clamping system. Backgauge/support: two vertical backgauge/support columns are mounted on the bed. Safety and guarding: listed safety equipment includes side guards, rear guards and safety photocells; a yellow vertical safety light curtain housing/post is present at a front corner of the machine. Operator/accessory items observed: an operator control pedestal with pushbutton is present in front of the machine. Other visible items in the area (coiled air hose and small containers) are not included specifications but were present in the photos. Notes for buyers: the machine shows cosmetic and some surface deformation consistent with prior use; verify mechanical condition, electrical components, tooling fitment and the CNC interface during inspection. No claims are made about testing, refurbishment status, or warranty.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: Salvagnini
Model / Series: Syncro
Machine type: CNC press brake
Year: 2013
Condition: Used, refurbished
Bending length: 4000 mm
Pressing force: 170 T (1700 kN)
Number of controlled axes: 4
Axes: Y1, Y2, X, R
Crowning system: Automatic Wila crowning
CNC control: Yes, exact CNC model not specified
Safety equipment: Side guards, rear guards and safety photocells compliant with regulations
CE compliant: Yes
Tooling included: Upper and lower tools
Tool clamping: Quick clamping system
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2026 |
| Offers online | 15 |
| Last activity | Oct. 29, 2026 |
MPTL Machine Tools is a specialist in new and used sheet metal working machinery, providing reliable solutions for cutting, forming and metal fabrication.
Each machine is carefully selected and inspected to ensure high standards of quality, performance and reliability. Combining technical expertise with a customer-focused approach, MPTL supports manufacturers in choosing the right equipment to optimize production, increase efficiency and maximize their investment.
With expertise, competitive solutions and dedicated support, MPTL is a trusted partner for sheet metal machinery.
Manufacturer: Salvagnini
Model / Series: Syncro
Machine type: CNC press brake
Year: 2013
Condition: Used, refurbished
Bending length: 4000 mm
Pressing force: 170 T (1700 kN)
Number of controlled axes: 4
Axes: Y1, Y2, X, R
Crowning system: Automatic Wila crowning
CNC control: Yes, exact CNC model not specified
Safety equipment: Side guards, rear guards and safety photocells compliant with regulations
CE compliant: Yes
Tooling included: Upper and lower tools
Tool clamping: Quick clamping system
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Salvagnini B2-170-4000 Syncro CNC press brake, manufacturer Salvagnini, year of manufacture 2013. Capacity and size: 170 T pressing force and 4,000 mm bending (folding) length. Controlled axes: 4 (Y1, Y2, X, R). Crowning: automatic Wila crowning. CNC control: BECKHOFF-branded operator touchscreen/control interface and conventional control panel with emergency stop and rotary controls. CE compliant. Condition: used. Visible surface wear is present on the front ram and lower beam, including scratches, scuffs, some dents and paint chipping; these items should be examined in person prior to purchase. Tooling and clamping: upper and lower tooling are included; the machine is equipped with segmented clamp blocks along the bed and a quick clamping system. Backgauge/support: two vertical backgauge/support columns are mounted on the bed. Safety and guarding: listed safety equipment includes side guards, rear guards and safety photocells; a yellow vertical safety light curtain housing/post is present at a front corner of the machine. Operator/accessory items observed: an operator control pedestal with pushbutton is present in front of the machine. Other visible items in the area (coiled air hose and small containers) are not included specifications but were present in the photos. Notes for buyers: the machine shows cosmetic and some surface deformation consistent with prior use; verify mechanical condition, electrical components, tooling fitment and the CNC interface during inspection. No claims are made about testing, refurbishment status, or warranty.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2026 |
| Offers online | 15 |
| Last activity | Oct. 29, 2026 |
MPTL Machine Tools is a specialist in new and used sheet metal working machinery, providing reliable solutions for cutting, forming and metal fabrication.
Each machine is carefully selected and inspected to ensure high standards of quality, performance and reliability. Combining technical expertise with a customer-focused approach, MPTL supports manufacturers in choosing the right equipment to optimize production, increase efficiency and maximize their investment.
With expertise, competitive solutions and dedicated support, MPTL is a trusted partner for sheet metal machinery.
CNC абкант преса Salvalgnini B2-170-4000
CNC ohraňovací lis Salvalgnini B2-170-4000
Salvalgnini B2-170-4000 CNC-kantpresse
Salvalgnini B2-170-4000 CNC-Abkantpresse
CNC στραντζόπρεσα Salvalgnini B2-170-4000
Salvalgnini B2-170-4000 CNC press brake
Prensa plegadora CNC Salvalgnini B2-170-4000
Presse plieuse CNC Salvalgnini B2-170-4000
CNC abkant preša Salvalgnini B2-170-4000
Salvalgnini B2-170-4000 CNC él-hajlító prés
Piegatrice CNC Salvalgnini B2-170-4000
Salvalgnini B2-170-4000 CNC lenkimo presas
Salvalgnini B2-170-4000 CNC-kantpers
Prasa krawędziowa CNC Salvalgnini B2-170-4000
Prensa dobradeira CNC Salvalgnini B2-170-4000
Presă abkant CNC Salvalgnini B2-170-4000
Salvalgnini B2-170-4000 Листогибочный пресс с ЧПУ
CNC abkant presa Salvalgnini B2-170-4000
Salvalgnini B2-170-4000 CNC-kantpress
CNC abkant pres Salvalgnini B2-170-4000
EN
- Languages
English (GB)