| Manufacturer | Sachman |
|---|---|
| Model | TRT 314 HS |
| Year | 2003 |
| Location | Italy
|
Overview
SACHMAN TRT 314 HS is a 5-axis T-column milling machine equipped with a pallet changer and SELCA 4045PD CNC. The listing specifies a year of construction of 2003. The description below consolidates the technical data and standard equipment as provided in the listing.
Machine travels and control
- Control: SELCA 4045PD CNC
- X-axis (longitudinal) travel: 2500 mm
- Y-axis (transversal) travel: 1400 mm
- Z-axis (vertical) travel: 1500 mm
Table
- Table dimensions: 1200 x 1200 mm
- Load capacity: 5000 kg
- Number of dividing heads: 360,000
- T-slots: 1 7 – 127 mm center distance
- Table axis motor power: 6 kW
KOSMO 5 automatic bi-rotative head
- Continuous power: 28 kW
- Spindle speed (KOSMO head): 4,000 rpm
- Plane positioning with HIRT teeth
- Rotation in rear plane: 2.5°
- Rotation in front plane: 3°
- Tool taper: DIN 69871-A50
- Drawbar: DIN 69872-28 (50)
Pallet changer — DCN 100 CP
- Described as fully automatic and managed by the machine control according to a predetermined sequence
- Pallet rack base: electro-welded FE42 steel with a chip and emulsified oil containment/collection tank
- Pallet movement: two-stage operation using a hydraulic cylinder and a screw driven by a brushless servomotor
- Pallet slides on linear guides (size 45 standard-precision ball bearings)
- Pallet material: treated, machined, and ground G30 cast iron with T-slots on the worktable for mounting
- Sliding guides and centering cones mounted on the lower section, case-hardened and ground
Standard equipment listed
Electronic handwheel; electronic head thermal expansion compensation device; high-pressure through-spindle; chip conveyor with double front and rear conveyors; SIDESALPA 40-station tool magazine; complete enclosure; instruction manuals; CE declaration.
Notes
Specifications and equipment are taken from the provided listing. Images and technical specifications are provided for illustrative purposes only and do not constitute a contractual element.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
SACHMAN TRT 314 HS 5-AXIS T-COLUMN MILLING MACHINE WITH PALLET CHANGER
TECHNICAL SPECIFICATIONS:
YEAR OF CONSTRUCTION: 2003
SELCA 4045PD CNC
TRAVELS:
X-axis longitudinal travel: 2500 mm
Y-axis transversal travel: 1400 mm
Z-axis vertical travel: 1500 mm
TABLE:
Dimensions: 1200 x 1200 mm
Load capacity: 5000 kg
Number of dividing heads: 360,000
T-slots: 1 7 – 127 mm center distance
Table axis motor power: 6 kW
KOSMO 5 AUTOMATIC BI-ROTATIVE HEAD:
Continuous power: 28 kW
KOSMO head spindle speed: 4,000 rpm
Plane positioning with HIRT teeth
Rotation in the rear plane: 2.5°
Rotation in the front plane: 3°
Tool taper: DIN 69871-A50
Drawbar: DIN 69872-28 (50)
PALLET CHANGE: DCN 100 CP
The pallet change system is fully automatic and is managed directly by the machine control according to a predetermined sequence.
The pallet rack base is made of electro-welded FE42 steel and has a large containment and collection tank for chips and emulsified oil.
The pallet movement system occurs in two stages, with the aid of a hydraulic cylinder and a screw connected to a brushless servomotor.
The pallet slides on linear guides with size 45 standard-precision ball bearings.
The PALLET is constructed of treated, machined, and ground G30 cast iron. T-slots are provided on the worktable for mounting.
The sliding guides and centering cones are mounted on the lower section, all case-hardened and ground.
Machine complete with:
Electronic handwheel
Electronic head thermal expansion compensation device
High pressure through the spindle
Chip conveyor with double front and rear chip conveyors
SIDESALPA 40-station tool magazine
Complete enclosure
Instruction manuals
CE declaration
Images and technical specifications are provided for illustrative purposes only and do not constitute a contractual element.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Is this Sachman TRT 314 HS a bed-type CNC milling machine?
This Sachman TRT 314 HS is a bed-type CNC milling machine.
Is this Sachman TRT 314 HS in good condition?
This Sachman TRT 314 HS is in good condition.
Is this Sachman TRT 314 HS visible in operation?
This Sachman TRT 314 HS is visible in operation at our facility.
Will this Sachman TRT 314 HS undergo a general mechanical and electrical overhaul?
This Sachman TRT 314 HS will undergo a general mechanical and electrical overhaul.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 68 |
| Last activity | Nov. 15, 2026 |
SACHMAN TRT 314 HS 5-AXIS T-COLUMN MILLING MACHINE WITH PALLET CHANGER
TECHNICAL SPECIFICATIONS:
YEAR OF CONSTRUCTION: 2003
SELCA 4045PD CNC
TRAVELS:
X-axis longitudinal travel: 2500 mm
Y-axis transversal travel: 1400 mm
Z-axis vertical travel: 1500 mm
TABLE:
Dimensions: 1200 x 1200 mm
Load capacity: 5000 kg
Number of dividing heads: 360,000
T-slots: 1 7 – 127 mm center distance
Table axis motor power: 6 kW
KOSMO 5 AUTOMATIC BI-ROTATIVE HEAD:
Continuous power: 28 kW
KOSMO head spindle speed: 4,000 rpm
Plane positioning with HIRT teeth
Rotation in the rear plane: 2.5°
Rotation in the front plane: 3°
Tool taper: DIN 69871-A50
Drawbar: DIN 69872-28 (50)
PALLET CHANGE: DCN 100 CP
The pallet change system is fully automatic and is managed directly by the machine control according to a predetermined sequence.
The pallet rack base is made of electro-welded FE42 steel and has a large containment and collection tank for chips and emulsified oil.
The pallet movement system occurs in two stages, with the aid of a hydraulic cylinder and a screw connected to a brushless servomotor.
The pallet slides on linear guides with size 45 standard-precision ball bearings.
The PALLET is constructed of treated, machined, and ground G30 cast iron. T-slots are provided on the worktable for mounting.
The sliding guides and centering cones are mounted on the lower section, all case-hardened and ground.
Machine complete with:
Electronic handwheel
Electronic head thermal expansion compensation device
High pressure through the spindle
Chip conveyor with double front and rear chip conveyors
SIDESALPA 40-station tool magazine
Complete enclosure
Instruction manuals
CE declaration
Images and technical specifications are provided for illustrative purposes only and do not constitute a contractual element.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Is this Sachman TRT 314 HS a bed-type CNC milling machine?
This Sachman TRT 314 HS is a bed-type CNC milling machine.
Is this Sachman TRT 314 HS in good condition?
This Sachman TRT 314 HS is in good condition.
Is this Sachman TRT 314 HS visible in operation?
This Sachman TRT 314 HS is visible in operation at our facility.
Will this Sachman TRT 314 HS undergo a general mechanical and electrical overhaul?
This Sachman TRT 314 HS will undergo a general mechanical and electrical overhaul.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Overview
SACHMAN TRT 314 HS is a 5-axis T-column milling machine equipped with a pallet changer and SELCA 4045PD CNC. The listing specifies a year of construction of 2003. The description below consolidates the technical data and standard equipment as provided in the listing.
Machine travels and control
- Control: SELCA 4045PD CNC
- X-axis (longitudinal) travel: 2500 mm
- Y-axis (transversal) travel: 1400 mm
- Z-axis (vertical) travel: 1500 mm
Table
- Table dimensions: 1200 x 1200 mm
- Load capacity: 5000 kg
- Number of dividing heads: 360,000
- T-slots: 1 7 – 127 mm center distance
- Table axis motor power: 6 kW
KOSMO 5 automatic bi-rotative head
- Continuous power: 28 kW
- Spindle speed (KOSMO head): 4,000 rpm
- Plane positioning with HIRT teeth
- Rotation in rear plane: 2.5°
- Rotation in front plane: 3°
- Tool taper: DIN 69871-A50
- Drawbar: DIN 69872-28 (50)
Pallet changer — DCN 100 CP
- Described as fully automatic and managed by the machine control according to a predetermined sequence
- Pallet rack base: electro-welded FE42 steel with a chip and emulsified oil containment/collection tank
- Pallet movement: two-stage operation using a hydraulic cylinder and a screw driven by a brushless servomotor
- Pallet slides on linear guides (size 45 standard-precision ball bearings)
- Pallet material: treated, machined, and ground G30 cast iron with T-slots on the worktable for mounting
- Sliding guides and centering cones mounted on the lower section, case-hardened and ground
Standard equipment listed
Electronic handwheel; electronic head thermal expansion compensation device; high-pressure through-spindle; chip conveyor with double front and rear conveyors; SIDESALPA 40-station tool magazine; complete enclosure; instruction manuals; CE declaration.
Notes
Specifications and equipment are taken from the provided listing. Images and technical specifications are provided for illustrative purposes only and do not constitute a contractual element.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 68 |
| Last activity | Nov. 15, 2026 |
CNC фреза с фиксирана маса Sachman TRT 314 HS
CNC frézka s pevným stolem Sachman TRT 314 HS
Sachman TRT 314 HS CNC-fræser med fast bord
CNC-Fräsmaschine mit festem Tisch Sachman TRT 314 HS
CNC φρέζα με σταθερό τραπέζι Sachman TRT 314 HS
Sachman TRT 314 HS Fixed Bed CNC Milling Machine
Fresadora CNC de bancada fija Sachman TRT 314 HS
Fraiseuse CNC à banc fixe Sachman TRT 314 HS
CNC glodalica s fiksnim stolom Sachman TRT 314 HS
Sachman TRT 314 HS fix asztalos CNC marógép
Fresatrice CNC a banco fisso Sachman TRT 314 HS
Sachman TRT 314 HS fiksuoto stalo CNC frezavimo staklės
Sachman TRT 314 HS CNC-freesmachine met vaste tafel
Frezarka CNC z sztywnym stołem Sachman TRT 314 HS
Fresadora CNC de bancada fixa Sachman TRT 314 HS
Freza CNC cu banc fix Sachman TRT 314 HS
Координатно-фрезерный станок с неподвижным столом Sachman TRT 314 HS
CNC фреза са фиксним столом Sachman TRT 314 HS
Sachman TRT 314 HS CNC-fräs med fast bord
Sachman TRT 314 HS Sabit Tabla CNC Freze Makinesi
EN
- Languages
English (GB)