| Category | Offset presses - 5 colours |
| Max. paper length | 788 cm |
| Max. paper width | 600 cm |
| Perfecting | Yes |
| Dryer | IR |
| Coating unit | Yes |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 31/10/2026 |
| Product id | P261030141 |
| Language |
Ryobi 755 P+L Wide five-colour offset printing press, manufactured in 2008. The press has a maximum paper size of 788 × 600 mm and is specified with a coating unit, perfecting, and an IR and hot-air dryer. The listing reports approximately 140 million impressions and describes the machine as being in very good condition.
The equipment includes a pallet feeder, double-sheet and ultrasonic double-sheet detectors, wash-up devices for the blanket, impression cylinder and inking unit, and a full-RPC automatic plate changer. Control and setup features listed include the Ryobi PCS-G printing control system, Ryobi PDS-E automatic printing density control, remote plate register control, paper-size presetting, automatic impression setting, and CIP4 ink volume setting with RIP. The press also has a Ryobi-Matic continuous dampening system and preparation for ink-roller temperature control.
Additional listed equipment includes an oscillating ink form roller, Grafix Contemp dampening and cooling solution with Alcoprint 4000, an air cooling system, non-stop delivery, extended semi-long delivery, and a Grafix Digital powder sprayer. The configuration is described as 5-D1, with perfecting for 1/4 or 5/0 printing.
The press is assembled on a raised platform and has multiple printing units with individual controls, a front feeder with a transparent safety guard, and a Ryobi PCS-G operator console with display screens and illuminated buttons. Separate Grafix control cabinets are also present. Exterior panels show some scuffs and marks; the printing units and rollers show ink residue and staining.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Ryobi 755 P+L Wide
Manufacturer:
Ryobi
Format:
78,8 x 60 cm
Printing:
Offset printing: 5 colors
Year of manufacture:
2008
Condition:
Very good
Print run:
140 mio. impressions Mio.
Ryobi 755 P Wide + L
Age: 2008
Counter: approx. 140 mio. impressions
Max. paper size: 788 x 600 mm, Min. paper size: 279 x 200 mm
Max. printing area: 765 x 545 mm (30,12 x 21,46 inch)
Paper thickness: 0,04 – 0,6 mm
Speed: 15.000 sheets/hour
Type: 5-D1
Equipment:
5-color offset printing press
Coating unit
Perfector 1/4 or 5/0
Pallet feeder
Double-sheet detector
Ultrasonic double-sheet detector
All wash-up devices (blanket, impression cylinder and inking unit)
Full-RPC full automatic plate changer
Ryobi PCS-G printing control system
Ryobi PDS-E auto printing density control system
Remote plate register control (vertical, lateral, diagonal)
Paper size preset system
Automatic impression setting
Ryobi-Matic continuous dampening system
Preparation for ink roller temperature control system
Oscillating ink form roller
Grafix Contemp dampening and cooling solution with Alcoprint 4000
Air cooling system
Non-stop delivery
Grafix IR and hot air dryer
Extended semi-long delivery
Grafix Digital powder sprayer
CIP4 ink volume setter with RIP
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 58 |
| Last activity | Nov. 3, 2026 |
Ryobi 755 P+L Wide
Manufacturer:
Ryobi
Format:
78,8 x 60 cm
Printing:
Offset printing: 5 colors
Year of manufacture:
2008
Condition:
Very good
Print run:
140 mio. impressions Mio.
Ryobi 755 P Wide + L
Age: 2008
Counter: approx. 140 mio. impressions
Max. paper size: 788 x 600 mm, Min. paper size: 279 x 200 mm
Max. printing area: 765 x 545 mm (30,12 x 21,46 inch)
Paper thickness: 0,04 – 0,6 mm
Speed: 15.000 sheets/hour
Type: 5-D1
Equipment:
5-color offset printing press
Coating unit
Perfector 1/4 or 5/0
Pallet feeder
Double-sheet detector
Ultrasonic double-sheet detector
All wash-up devices (blanket, impression cylinder and inking unit)
Full-RPC full automatic plate changer
Ryobi PCS-G printing control system
Ryobi PDS-E auto printing density control system
Remote plate register control (vertical, lateral, diagonal)
Paper size preset system
Automatic impression setting
Ryobi-Matic continuous dampening system
Preparation for ink roller temperature control system
Oscillating ink form roller
Grafix Contemp dampening and cooling solution with Alcoprint 4000
Air cooling system
Non-stop delivery
Grafix IR and hot air dryer
Extended semi-long delivery
Grafix Digital powder sprayer
CIP4 ink volume setter with RIP
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Offset presses - 5 colours |
| Max. paper length | 788 cm |
| Max. paper width | 600 cm |
| Perfecting | Yes |
| Dryer | IR |
| Coating unit | Yes |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 31/10/2026 |
| Product id | P261030141 |
| Language |
Ryobi 755 P+L Wide five-colour offset printing press, manufactured in 2008. The press has a maximum paper size of 788 × 600 mm and is specified with a coating unit, perfecting, and an IR and hot-air dryer. The listing reports approximately 140 million impressions and describes the machine as being in very good condition.
The equipment includes a pallet feeder, double-sheet and ultrasonic double-sheet detectors, wash-up devices for the blanket, impression cylinder and inking unit, and a full-RPC automatic plate changer. Control and setup features listed include the Ryobi PCS-G printing control system, Ryobi PDS-E automatic printing density control, remote plate register control, paper-size presetting, automatic impression setting, and CIP4 ink volume setting with RIP. The press also has a Ryobi-Matic continuous dampening system and preparation for ink-roller temperature control.
Additional listed equipment includes an oscillating ink form roller, Grafix Contemp dampening and cooling solution with Alcoprint 4000, an air cooling system, non-stop delivery, extended semi-long delivery, and a Grafix Digital powder sprayer. The configuration is described as 5-D1, with perfecting for 1/4 or 5/0 printing.
The press is assembled on a raised platform and has multiple printing units with individual controls, a front feeder with a transparent safety guard, and a Ryobi PCS-G operator console with display screens and illuminated buttons. Separate Grafix control cabinets are also present. Exterior panels show some scuffs and marks; the printing units and rollers show ink residue and staining.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 58 |
| Last activity | Nov. 3, 2026 |