| Manufacturer | Ross |
|---|---|
| Model | 250 R6 |
| Year | 1998 |
| Location | Italy
|
| Category | Miscellaneous presses and forging machines |
| Force | 250 T |
| Stroke length | 250 mm |
| Table length | 1400 mm |
| Table width | 880 mm |
| Weight | 23850 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Ross 250 R6 |
| Last availability date | 03/02/2026 |
| Product id | P260128080 |
| Language |
Преса Ross 250 R6
Lis Ross 250 R6
Ross 250 R6 Presse
Ross 250 R6 Presse
Πρέσα Ross 250 R6
Ross 250 R6 Press
Prensa Ross 250 R6
Presse Ross 250 R6
Preša Ross 250 R6
Ross 250 R6 Prés
Pressa Ross 250 R6
Presas Ross 250 R6
Ross 250 R6 Pers
Prasa Ross 250 R6
Prensa Ross 250 R6
Prese Ross 250 R6
Ross 250 R6 Пресс
Presa Ross 250 R6
Ross 250 R6 Press
Pres Ross 250 R6
|
Manufacturer: Ross
Model: 250 R6
Year of Manufacture: 1998
This industrial press machine by Ross offers a pressing force of 250 tons, suitable for heavy-duty applications. The machine features a slide stroke adjustable from a minimum of 18 mm up to 250 mm, allowing for versatile operation depending on the task requirements. The worktable measures 1400 mm in length and 880 mm in width, providing a substantial surface area for mounting dies or fixtures. The ram dimensions are 1100 mm by 720 mm, and the die dimensions are 1000 mm by 700 mm, accommodating a range of tooling sizes.
The machine includes a shank hole and protrusion measuring 65 mm and 440 mm, respectively. It is equipped with a motorized adjustable ram with a 150 mm adjustment range. The press operates at a nominal strike rate of 43 strokes per minute, with a minimum of 21 and a maximum of 62 strokes per minute. It runs on a motor tension of 380 V and a frequency of 50 Hz.
For safety, the press features a hydraulic safety overload system. The lateral window size is 660 mm, facilitating access and operation. The total weight of the machine is approximately 23,850 kg.
The machine is painted green with an orange pressing component. It includes a control panel mounted on the right side equipped with multiple buttons and switches for operation control. The flat metal worktable has slots (T-slots) for secure mounting of dies or fixtures. Visible electrical cables and connectors are present at the base and side of the machine. The machine appears to be in good physical condition with intact surface paint showing minor wear marks, and no visible damage or rust. A motor or mechanical component is mounted on the upper left side of the machine, contributing to its operational capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: Ross
Model: 250 R6
Year of Manufacture: 1998
Technical Condition: As-is, where-is
Description:
- Type: Ross
- Tonnage: 250 Tons
- Slide Stroke (Min/Max): 18 – 250 mm
- Table Dimensions: 1400 x 880 mm
- Ram Dimensions: 1100 x 720 mm
- Die Dimensions: 1000 x 700 mm
- Shank Hole/Protrusion: 65/440 mm
- Motorized Adjustable Ram: 150 mm
- Strikes (Nom/Min/Max): 43/21/62 per minute
- Motor Tension: 380 V
- Frequency: 50 Hz
- Lateral Window: 660 mm
- Hydraulic Safety Overload
- Weight: 23850 Kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 30 |
| Last activity | Nov. 7, 2026 |
Sidicom Group S.R.L. is a leading Italian company specializing in the trade of new and refurbished machinery for the sheet metal and swarf industries. With a strong presence in the market, Sidicom offers a comprehensive range of equipment, including mechanical and hydraulic presses, forming presses, shears, and feeder lines. Their extensive inventory also features a variety of machines such as bending rolls, punching machines, and lifting and handling equipment, catering to diverse industrial needs. Located in Limena, Padua, Sidicom Group S.R.L. operates from a fully equipped facility that ensures meticulous inspection and potential revamping of used machinery, guaranteeing compliance with current regulations. Their commitment to quality is further demonstrated through complete mechanical and electrical retrofitting services, providing clients with equipment that matches the productivity of new machines while offering cost-effective solutions. Beyond machinery sales, Sidicom Group S.R.L. offers a suite of services, including 360° complete consultancy, maintenance, compliance and safety certifications, as well as transport and installation. Their dedicated team of skilled technicians and consultants work closely with clients to identify optimal machinery solutions, ensuring seamless integration and long-term operational efficiency. With a focus on sustainable innovation and customer satisfaction, Sidicom Group S.R.L. stands as a trusted partner for businesses seeking reliable and high-quality machinery solutions in the sheet metal and swarf sectors.
Manufacturer: Ross
Model: 250 R6
Year of Manufacture: 1998
Technical Condition: As-is, where-is
Description:
- Type: Ross
- Tonnage: 250 Tons
- Slide Stroke (Min/Max): 18 – 250 mm
- Table Dimensions: 1400 x 880 mm
- Ram Dimensions: 1100 x 720 mm
- Die Dimensions: 1000 x 700 mm
- Shank Hole/Protrusion: 65/440 mm
- Motorized Adjustable Ram: 150 mm
- Strikes (Nom/Min/Max): 43/21/62 per minute
- Motor Tension: 380 V
- Frequency: 50 Hz
- Lateral Window: 660 mm
- Hydraulic Safety Overload
- Weight: 23850 Kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Miscellaneous presses and forging machines |
| Force | 250 T |
| Stroke length | 250 mm |
| Table length | 1400 mm |
| Table width | 880 mm |
| Weight | 23850 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Ross 250 R6 |
| Last availability date | 03/02/2026 |
| Product id | P260128080 |
| Language |
Преса Ross 250 R6
Lis Ross 250 R6
Ross 250 R6 Presse
Ross 250 R6 Presse
Πρέσα Ross 250 R6
Ross 250 R6 Press
Prensa Ross 250 R6
Presse Ross 250 R6
Preša Ross 250 R6
Ross 250 R6 Prés
Pressa Ross 250 R6
Presas Ross 250 R6
Ross 250 R6 Pers
Prasa Ross 250 R6
Prensa Ross 250 R6
Prese Ross 250 R6
Ross 250 R6 Пресс
Presa Ross 250 R6
Ross 250 R6 Press
Pres Ross 250 R6
|
Manufacturer: Ross
Model: 250 R6
Year of Manufacture: 1998
This industrial press machine by Ross offers a pressing force of 250 tons, suitable for heavy-duty applications. The machine features a slide stroke adjustable from a minimum of 18 mm up to 250 mm, allowing for versatile operation depending on the task requirements. The worktable measures 1400 mm in length and 880 mm in width, providing a substantial surface area for mounting dies or fixtures. The ram dimensions are 1100 mm by 720 mm, and the die dimensions are 1000 mm by 700 mm, accommodating a range of tooling sizes.
The machine includes a shank hole and protrusion measuring 65 mm and 440 mm, respectively. It is equipped with a motorized adjustable ram with a 150 mm adjustment range. The press operates at a nominal strike rate of 43 strokes per minute, with a minimum of 21 and a maximum of 62 strokes per minute. It runs on a motor tension of 380 V and a frequency of 50 Hz.
For safety, the press features a hydraulic safety overload system. The lateral window size is 660 mm, facilitating access and operation. The total weight of the machine is approximately 23,850 kg.
The machine is painted green with an orange pressing component. It includes a control panel mounted on the right side equipped with multiple buttons and switches for operation control. The flat metal worktable has slots (T-slots) for secure mounting of dies or fixtures. Visible electrical cables and connectors are present at the base and side of the machine. The machine appears to be in good physical condition with intact surface paint showing minor wear marks, and no visible damage or rust. A motor or mechanical component is mounted on the upper left side of the machine, contributing to its operational capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 30 |
| Last activity | Nov. 7, 2026 |
Sidicom Group S.R.L. is a leading Italian company specializing in the trade of new and refurbished machinery for the sheet metal and swarf industries. With a strong presence in the market, Sidicom offers a comprehensive range of equipment, including mechanical and hydraulic presses, forming presses, shears, and feeder lines. Their extensive inventory also features a variety of machines such as bending rolls, punching machines, and lifting and handling equipment, catering to diverse industrial needs. Located in Limena, Padua, Sidicom Group S.R.L. operates from a fully equipped facility that ensures meticulous inspection and potential revamping of used machinery, guaranteeing compliance with current regulations. Their commitment to quality is further demonstrated through complete mechanical and electrical retrofitting services, providing clients with equipment that matches the productivity of new machines while offering cost-effective solutions. Beyond machinery sales, Sidicom Group S.R.L. offers a suite of services, including 360° complete consultancy, maintenance, compliance and safety certifications, as well as transport and installation. Their dedicated team of skilled technicians and consultants work closely with clients to identify optimal machinery solutions, ensuring seamless integration and long-term operational efficiency. With a focus on sustainable innovation and customer satisfaction, Sidicom Group S.R.L. stands as a trusted partner for businesses seeking reliable and high-quality machinery solutions in the sheet metal and swarf sectors.
EN
- Languages
English (GB)