Contact us to receive an offer.
| Manufacturer | Reifenhäuser |
|---|---|
| Model | BT-1000-2-63K |
| Year | |
| Location | Germany
|
This twin-screw extruder, model BT-1000-2-63K, is manufactured by Reifenhäuser. It features a conical screw geometry specifically designed for processing rigid PVC profiles. The extruder has a screw diameter of 63 mm and a screw length of 1300 mm, with a maximum screw speed of approximately 32 rpm. The gearbox delivers a nominal torque of 1000 daNm, and the back pressure bearing has a dynamic load rating of 103600 daN. The motor powering the extruder is a 43 kW Baumüller DC motor.
Temperature control is managed digitally via two PSG Multipact 88 controllers, overseeing multiple heating zones: 4 barrel heating zones, 3 barrel cooling zones with air cooling fans, 1 adapter heating zone, and 5 tool heating zones. The extruder can handle a maximum permissible melt pressure of 500 bar and achieves an output of approximately 150 to 200 kg/h for rigid PVC profiles.
The machine includes several accessories such as a material hopper, dosing device, and vacuum pump. It is also equipped with special accessories including a material temperature sensor and a material pressure sensor. The extrusion height is 1150 mm, and the overall dimensions of the extruder without the hopper are 4250 mm (length) x 1200 mm (width) x 1750 mm (height), with a weight of 3000 kg.
Recent maintenance includes replacement of screws and barrel two years ago, and the extruder has been repainted in light gray (RAL 7035). The machine appears clean and well-maintained with no visible damage. It is equipped with a control panel on the right side featuring multiple electrical meters, switches, indicator lights, and an emergency stop button. A pressure gauge is mounted on the extrusion barrel. Protective metal mesh panels cover the lower sections of the machine for safety. The motor and gear assemblies are visible on the left side, along with additional motors and pump assemblies at the rear. The extruder is positioned indoors on a concrete floor in an industrial setting.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Twin-screw extruder, conical
Manufacturer: Reifenhäuser
Type: BT 1000-2-63 K
Year of construction: 1994
Operating hours: 32,303 hours
Screw geometry: conical for PVC-hard profiles
Screw diameter: 63 – 121 mm
Screw length: 1300 mm
Screw speed: max. approx. 32 1/min.
Nominal torque from gearbox: 1000 daNm
Dynamic load rating of the back pressure bearing: 103600 daN
Motor power: 43.0 kW,
Drive motor: Baumüller DC motor
Barrel heating/cooling zones: 4/3 (air cooling with fan)
Adapter heating zones: 1
Tool heating zones: 5
Temperature control: digital temperature controller (2 x PSG Multipact 88)
Max. permissible melt pressure: 500 bar
Output: approx. 150 – 200 kg/h for rigid PVC profiles
Accessories: Material hopper, dosing device and vacuum pump
Special acessories: material temperature sensor and material pressure sensor
Extrusion height: 1150 mm
Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH)
Weight: 3000 kg
Remark: Screws and barrel were replaced two years ago.
Condition: The extruder was repainted (light gray, RAL 7035)
and checked for function.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 5 |
| Last activity | Nov. 2, 2026 |
Twin-screw extruder, conical
Manufacturer: Reifenhäuser
Type: BT 1000-2-63 K
Year of construction: 1994
Operating hours: 32,303 hours
Screw geometry: conical for PVC-hard profiles
Screw diameter: 63 – 121 mm
Screw length: 1300 mm
Screw speed: max. approx. 32 1/min.
Nominal torque from gearbox: 1000 daNm
Dynamic load rating of the back pressure bearing: 103600 daN
Motor power: 43.0 kW,
Drive motor: Baumüller DC motor
Barrel heating/cooling zones: 4/3 (air cooling with fan)
Adapter heating zones: 1
Tool heating zones: 5
Temperature control: digital temperature controller (2 x PSG Multipact 88)
Max. permissible melt pressure: 500 bar
Output: approx. 150 – 200 kg/h for rigid PVC profiles
Accessories: Material hopper, dosing device and vacuum pump
Special acessories: material temperature sensor and material pressure sensor
Extrusion height: 1150 mm
Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH)
Weight: 3000 kg
Remark: Screws and barrel were replaced two years ago.
Condition: The extruder was repainted (light gray, RAL 7035)
and checked for function.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This twin-screw extruder, model BT-1000-2-63K, is manufactured by Reifenhäuser. It features a conical screw geometry specifically designed for processing rigid PVC profiles. The extruder has a screw diameter of 63 mm and a screw length of 1300 mm, with a maximum screw speed of approximately 32 rpm. The gearbox delivers a nominal torque of 1000 daNm, and the back pressure bearing has a dynamic load rating of 103600 daN. The motor powering the extruder is a 43 kW Baumüller DC motor.
Temperature control is managed digitally via two PSG Multipact 88 controllers, overseeing multiple heating zones: 4 barrel heating zones, 3 barrel cooling zones with air cooling fans, 1 adapter heating zone, and 5 tool heating zones. The extruder can handle a maximum permissible melt pressure of 500 bar and achieves an output of approximately 150 to 200 kg/h for rigid PVC profiles.
The machine includes several accessories such as a material hopper, dosing device, and vacuum pump. It is also equipped with special accessories including a material temperature sensor and a material pressure sensor. The extrusion height is 1150 mm, and the overall dimensions of the extruder without the hopper are 4250 mm (length) x 1200 mm (width) x 1750 mm (height), with a weight of 3000 kg.
Recent maintenance includes replacement of screws and barrel two years ago, and the extruder has been repainted in light gray (RAL 7035). The machine appears clean and well-maintained with no visible damage. It is equipped with a control panel on the right side featuring multiple electrical meters, switches, indicator lights, and an emergency stop button. A pressure gauge is mounted on the extrusion barrel. Protective metal mesh panels cover the lower sections of the machine for safety. The motor and gear assemblies are visible on the left side, along with additional motors and pump assemblies at the rear. The extruder is positioned indoors on a concrete floor in an industrial setting.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 5 |
| Last activity | Nov. 2, 2026 |
Двушнеков екструдер Reifenhäuser BT-1000-2-63K
Dvoušnekový extrudér Reifenhäuser BT-1000-2-63K
Reifenhäuser BT-1000-2-63K Dobbeltsnegleekstruder
Reifenhäuser BT-1000-2-63K Doppelschneckenextruder
Δίκοχλιος εξωθητήρας Reifenhäuser BT-1000-2-63K
Reifenhäuser BT-1000-2-63K Twin screw extruder
Extrusora de doble husillo Reifenhäuser BT-1000-2-63K
Extrudeuse bivis Reifenhäuser BT-1000-2-63K
Dvopužni ekstruder Reifenhäuser BT-1000-2-63K
Reifenhäuser BT-1000-2-63K Kétcsigás extruder
Estrusore bivite Reifenhäuser BT-1000-2-63K
Dviejų sraigių ekstruderis Reifenhäuser BT-1000-2-63K
Reifenhäuser BT-1000-2-63K Dubbelschroefextruder
Wytłaczarka dwuślimakowa Reifenhäuser BT-1000-2-63K
Extrusora de dupla rosca Reifenhäuser BT-1000-2-63K
Extruder cu dublu șnec Reifenhäuser BT-1000-2-63K
Reifenhäuser BT-1000-2-63K Двухшнековый экструдер
Dvošnekni ekstruder Reifenhäuser BT-1000-2-63K
Reifenhäuser BT-1000-2-63K Dubbelskruvsextruder
Çift vidalı ekstrüder Reifenhäuser BT-1000-2-63K
EN
- Languages
English (GB)