| Manufacturer | REIFENHÄUSER |
|---|---|
| Model | BI Trudes 115 |
| Year | 2013 |
| Location | Germany
|
This REIFENHÄUSER BI Trudes 115 twin screw extruder, manufactured in 2013, is designed primarily for pipe extrusion applications. It features a robust construction with a long white extruder housing complemented by blue protective mesh panels at the ends, supported by a sturdy blue metal frame mounted on legs with wheels for mobility.
The machine is equipped with a counter-rotating twin-screw extruder featuring a gearbox with an integrated back pressure bearing rated for 350 bar. The barrel has a diameter of 115 mm and includes atmospheric and vacuum degassing openings. Heating and air cooling are divided into five zones with a total output of 56,400 W. A vacuum unit specific to the BT 115 model is included, comprising two vacuum units and a vacuum suction unit.
Control and regulation are managed via a complete control cabinet fitted with all necessary equipment. The control interface includes a Siemens MP377 touch panel for setpoint specification and actual value display, along with a microprocessor-controlled multi-channel controller supporting two and three-point zones. The system features adaptive and self-optimizing control behavior, fault messaging with collective alarms and storage, and recipe management for up to 20 recipes.
The drive system consists of a vector-controlled AC motor with a digital drive controller employing full digital technology. Motor temperature monitoring is included with pre-warning and shutdown capabilities. Additional instrumentation includes two electrical melt pressure transducers (1/2" UNF diaphragm type) and two ground temperature sensors with sword probes.
The extruder incorporates a pair of compact, highly tempered steel and bimetal design worms. Recirculating oil lubrication is monitored for oil pressure and temperature. The machine’s mains supply includes a main switch and load disconnector for heating, drives, and auxiliary voltages.
Visible components include multiple pressure gauges and valves on the front lower section, numerous attached pipes and flexible blue coolant hoses ending in orange nozzles, and a large blue motor mounted on the left side. The control cabinet features multiple buttons, switches, and indicator lights on its front panel. The machine is currently supported by wooden blocks.
The extruder shows some signs of use, with visible dust, dirt, and minor rust on the lower frame and base supports. The floor beneath and around the machine also exhibits dirt and marks consistent with operational environments.
This comprehensive setup offers a well-equipped solution for extrusion processes, combining advanced control features with sturdy mechanical components.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information.
2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer
2x ground temperature sensor with sword probe
Stationary for an extrusion height of 1000 mm
Complete control cabinet with all necessary control and regulation equipment attached
Microprocessor-controlled multi-channel controller for two and three-point zones
Adaptive and self-optimizing control behavior
Fault messages with collective alarm and storage
Siemens mp377 touch panel for setpoint specification and actual value display
Recipe management of up to 20 recipes
Drive with one ac motor, vector-controlled
Digital drive controller for ac motors, with full digital technology
Motor temperature monitoring with pre-warning and shutdown
13x anchoring for one fixing point installation tool
Pair of worms, compact version, made of highly tempered steel and bimetal design
Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar
Recirculating oil lubrication with oil pressure and oil temperature monitoring
Barrel Ø 115-30 d with atmospheric and vacuum degassing openings
Heating and air cooling divided into 5 zones, total output of 56400 w
Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit
Complete screw temperature control including cassette installation
Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages
Machine still under power
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2044 |
| Last activity | Nov. 4, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information.
2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer
2x ground temperature sensor with sword probe
Stationary for an extrusion height of 1000 mm
Complete control cabinet with all necessary control and regulation equipment attached
Microprocessor-controlled multi-channel controller for two and three-point zones
Adaptive and self-optimizing control behavior
Fault messages with collective alarm and storage
Siemens mp377 touch panel for setpoint specification and actual value display
Recipe management of up to 20 recipes
Drive with one ac motor, vector-controlled
Digital drive controller for ac motors, with full digital technology
Motor temperature monitoring with pre-warning and shutdown
13x anchoring for one fixing point installation tool
Pair of worms, compact version, made of highly tempered steel and bimetal design
Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar
Recirculating oil lubrication with oil pressure and oil temperature monitoring
Barrel Ø 115-30 d with atmospheric and vacuum degassing openings
Heating and air cooling divided into 5 zones, total output of 56400 w
Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit
Complete screw temperature control including cassette installation
Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages
Machine still under power
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This REIFENHÄUSER BI Trudes 115 twin screw extruder, manufactured in 2013, is designed primarily for pipe extrusion applications. It features a robust construction with a long white extruder housing complemented by blue protective mesh panels at the ends, supported by a sturdy blue metal frame mounted on legs with wheels for mobility.
The machine is equipped with a counter-rotating twin-screw extruder featuring a gearbox with an integrated back pressure bearing rated for 350 bar. The barrel has a diameter of 115 mm and includes atmospheric and vacuum degassing openings. Heating and air cooling are divided into five zones with a total output of 56,400 W. A vacuum unit specific to the BT 115 model is included, comprising two vacuum units and a vacuum suction unit.
Control and regulation are managed via a complete control cabinet fitted with all necessary equipment. The control interface includes a Siemens MP377 touch panel for setpoint specification and actual value display, along with a microprocessor-controlled multi-channel controller supporting two and three-point zones. The system features adaptive and self-optimizing control behavior, fault messaging with collective alarms and storage, and recipe management for up to 20 recipes.
The drive system consists of a vector-controlled AC motor with a digital drive controller employing full digital technology. Motor temperature monitoring is included with pre-warning and shutdown capabilities. Additional instrumentation includes two electrical melt pressure transducers (1/2" UNF diaphragm type) and two ground temperature sensors with sword probes.
The extruder incorporates a pair of compact, highly tempered steel and bimetal design worms. Recirculating oil lubrication is monitored for oil pressure and temperature. The machine’s mains supply includes a main switch and load disconnector for heating, drives, and auxiliary voltages.
Visible components include multiple pressure gauges and valves on the front lower section, numerous attached pipes and flexible blue coolant hoses ending in orange nozzles, and a large blue motor mounted on the left side. The control cabinet features multiple buttons, switches, and indicator lights on its front panel. The machine is currently supported by wooden blocks.
The extruder shows some signs of use, with visible dust, dirt, and minor rust on the lower frame and base supports. The floor beneath and around the machine also exhibits dirt and marks consistent with operational environments.
This comprehensive setup offers a well-equipped solution for extrusion processes, combining advanced control features with sturdy mechanical components.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2044 |
| Last activity | Nov. 4, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Двушнеков екструдер REIFENHÄUSER BI Trudes 115
Dvoušnekový extruder REIFENHÄUSER BI Trudes 115
REIFENHÄUSER BI Trudes 115 Ekstruder med to skruer
REIFENHÄUSER BI Trudes 115 Doppelschneckenextruder
Εξωθητήρας διπλού κοχλία REIFENHÄUSER BI Trudes 115
REIFENHÄUSER BI Trudes 115 Twin screw extruder
Extrusora doble husillo REIFENHÄUSER BI Trudes 115
Extrudeuse bivis REIFENHÄUSER BI Trudes 115
Dvopužni ekstruder REIFENHÄUSER BI Trudes 115
REIFENHÄUSER BI Trudes 115 Ikercsavaros extruder
Estrusore bivite REIFENHÄUSER BI Trudes 115
Dviejų sraigtų ekstruderis REIFENHÄUSER BI Trudes 115
REIFENHÄUSER BI Trudes 115 Extruder met dubbele schroef
Wytłaczarka z podwójnym ślimakiem REIFENHÄUSER BI Trudes 115
Extrusora de dupla rosca REIFENHÄUSER BI Trudes 115
Extruder cu două șuruburi REIFENHÄUSER BI Trudes 115
REIFENHÄUSER BI Trudes 115 Двухшнековый экструдер
Ekstruder sa dva puža REIFENHÄUSER BI Trudes 115
REIFENHÄUSER BI Trudes 115 Dubbelskruvextruder
Çift vidalı ekstruder REIFENHÄUSER BI Trudes 115
EN
- Languages
English (GB)