Contact us to receive an offer.
| Manufacturer | QUASER |
|---|---|
| Model | UX600 |
| Year | 2015 |
| Location | Czech Republic
|
Quaser UX600 5-axis machining center, manufactured in 2015. The machine is specified for 5-axis simultaneous machining and is equipped with a Heidenhain TNC 640 control. The control panel has a color display, keyboard and machine-control buttons, with a wired handheld pendant. The machine identification plate specifies the UX600/24A type and a maximum spindle speed of 24,000 rpm; the listing describes the spindle speed as approximately 20,000–24,000 rpm.
The listing states HSK63 tool holders, a tool magazine, workpiece probe, tool probe and tool holders. Spindle hours are listed as 17,655 and program run hours as 23,443. The enclosed machining area contains a rotary/tilting workholding assembly and a rotary table with T-slots. Coolant lines are visible at the spindle, and rear auxiliary equipment includes pumps, hoses and filtration units. A chip and coolant collection bin is also present.
Visible condition includes substantial workshop wear. The enclosure has scuffs, stains, chipped paint and discoloration, particularly around lower panels and door areas. Inside the machining area, surfaces and the rotary table show heavy staining, residue, accumulated chips and areas of rust-colored oxidation. Oil residue and staining are also present around the open compartment and door edges. The machine is shown with its work area and rear compartment open; condition and operating status should be assessed accordingly.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer / model: Quaser UX600
Year of manufacture: 2015
Control system: Heidenhain TNC 640
Condition: In operation, fully functional
Technical specifications
5-axis simultaneous machining, HSK63 tool holders
Spindle speed approx. 20–24,000 rpm
Spindle hours: 17,655
Program run hours: 23,443
Tool magazine
Workpiece probe
Tool probe
Tool holders
A modern 5-axis machining center that enables complex machining of complex parts in a single setup. Manufactured in 2015 and in regular operation.
Price negotiable.
Contact and viewing
CNC PAMA group s.r.o.
Contact person: CNC PAMA group s.ro.,
The machine can be viewed by prior telephone appointment.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 10 |
| Last activity | Oct. 30, 2026 |
Manufacturer / model: Quaser UX600
Year of manufacture: 2015
Control system: Heidenhain TNC 640
Condition: In operation, fully functional
Technical specifications
5-axis simultaneous machining, HSK63 tool holders
Spindle speed approx. 20–24,000 rpm
Spindle hours: 17,655
Program run hours: 23,443
Tool magazine
Workpiece probe
Tool probe
Tool holders
A modern 5-axis machining center that enables complex machining of complex parts in a single setup. Manufactured in 2015 and in regular operation.
Price negotiable.
Contact and viewing
CNC PAMA group s.r.o.
Contact person: CNC PAMA group s.ro.,
The machine can be viewed by prior telephone appointment.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Quaser UX600 5-axis machining center, manufactured in 2015. The machine is specified for 5-axis simultaneous machining and is equipped with a Heidenhain TNC 640 control. The control panel has a color display, keyboard and machine-control buttons, with a wired handheld pendant. The machine identification plate specifies the UX600/24A type and a maximum spindle speed of 24,000 rpm; the listing describes the spindle speed as approximately 20,000–24,000 rpm.
The listing states HSK63 tool holders, a tool magazine, workpiece probe, tool probe and tool holders. Spindle hours are listed as 17,655 and program run hours as 23,443. The enclosed machining area contains a rotary/tilting workholding assembly and a rotary table with T-slots. Coolant lines are visible at the spindle, and rear auxiliary equipment includes pumps, hoses and filtration units. A chip and coolant collection bin is also present.
Visible condition includes substantial workshop wear. The enclosure has scuffs, stains, chipped paint and discoloration, particularly around lower panels and door areas. Inside the machining area, surfaces and the rotary table show heavy staining, residue, accumulated chips and areas of rust-colored oxidation. Oil residue and staining are also present around the open compartment and door edges. The machine is shown with its work area and rear compartment open; condition and operating status should be assessed accordingly.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 10 |
| Last activity | Oct. 30, 2026 |
5-осен обработващ център QUASER UX600
5osé obráběcí centrum QUASER UX600
QUASER UX600 5-akset bearbejdningscenter
QUASER UX600 5-Achs-Bearbeitungszentrum
Κέντρο κατεργασίας 5 αξόνων QUASER UX600
QUASER UX600 5-axis machining center
Centro de mecanizado de 5 ejes QUASER UX600
Centre d'usinage 5 axes QUASER UX600
5-osni obradni centar QUASER UX600
QUASER UX600 5 tengelyes megmunkáló központ
Centro di lavoro a 5 assi QUASER UX600
QUASER UX600 5 ašių apdirbimo centras
QUASER UX600 5-assig bewerkingscentrum
Centrum obróbcze 5-osiowe QUASER UX600
Centro de usinagem de 5 eixos QUASER UX600
Centru de prelucrare cu 5 axe QUASER UX600
QUASER UX600 5-осевой обрабатывающий центр
5-osni obradni centar QUASER UX600
QUASER UX600 5-axligt bearbetningscenter
5 eksenli işleme merkezi QUASER UX600
EN
- Languages
English (GB)