5,680 €
Make an offerContact us to receive an offer.
| Flow rate | 20 m³/h |
| Max Pressure | 5 bar |
| Engine Power | 5.5 kW |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | packed |
| Datasheet | PUMPS PLP3-4 |
| Last availability date | 09/03/2026 |
This listing features a PUMPS PLP3-4 industrial pump, manufactured in 2015. The pump is designed for robust industrial applications, with a maximum flow rate of 20.0 m³/h and a maximum operating pressure of 5.0 bar. It is powered by an electric motor with an engine power rating of 5.5 kW.
The pump is constructed primarily of stainless steel, ensuring durability and resistance to corrosion, which is suitable for a wide range of fluids. It is mounted on a sturdy metal base equipped with adjustable feet, allowing for stable installation on various surfaces. The pump body includes inlet and outlet ports and bears Pomac branding on the side, indicating the manufacturer or associated brand.
The electric motor attached to the pump features a protective housing and electrical connections for safe operation. The overall condition of the pump and motor shows signs of prior use, including some water stains and minor surface wear, which may be expected in industrial equipment.
Additional technical specifications from the manufacturer include the ability to handle maximum viscosities up to 1,000,000 cPs and maximum temperatures of up to 140ºC. The pump can accommodate solids up to 60 mm in size, depending on the specific model and screw type. Various connection types are supported, including couplings (DIN11851, DIN11864-1, SMS1145), flanges (EN1092-1, Rectangular, DIN11864-2, ANSI), and tri-clamps (ISO2852, DIN32676, DIN11864-3).
The shaft sealing options include single or double mechanical seals made from silicon carbide or tungsten materials, as well as lip seals and O-rings with various elastomer materials such as EPDM, Viton, NBR, Teflon, and KALREZ, some compliant with FDA standards. Wetted parts are typically made from AISI 316L stainless steel, with options for other materials on request. Surface roughness is maintained below 0.8 microns, with options for finer finishes.
Drive standards include IEC motors with IE2 efficiency, IP55 protection, insulation class F, and PTC sensors, with optional upgrades to IE3 efficiency, ATEX certification, CSA/UL approval, and decentralized variable speed drives available.
This pump is suitable for various industrial pumping needs, offering reliable performance with robust construction and multiple customizable options to fit specific application requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Maximum capacity: 60 m³/hour
Maximum pressure: 15 bar (25 bar on request)
Maximum viscosity: ‹1,000,000 cPs
Maximum temperature: 140ºC
Passage: Max Solids 60 mm - Specific model and screw type
Blades: Bi-Wing or Quattro Lobe
Connections: ¾" – 4"
Connection types: Couplings: DIN11851, DIN11864-1, SMS1145 Flanges: EN1092-1, Rectangular, DIN11864-2, ANSI Tri-Clamps: ISO2852, DIN32676, DIN11864-3
Shaft seal: Single mechanical seal SIC/SIC or TC/TC Double mechanical seal SIC/SIC or TC/TCWDR Lip seal Single O-ring Double O-ring with hardening
Sealing materials: SiC / SiC or Tungsten / Tungsten
Elastomer materials EPDM, Viton, NBR, Teflon, KALREZ, e.g. according to FDA
Wetted parts: AISI 316L (AISI 316L Mo Ni or Hastelloy CX2MW N26022 on request)
Surface roughness: ‹0.8 Micron (Std), ‹0.5 on request
Hardening: Hard chrome plating and plasma nitriding (optional)
Drives Standard: IEC, IE2, B3/B5, IP55, insulation class F, PTC Optional: IE3, ATEX, CSA/UL, decentralized variable speed drive
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 12 |
| Last activity | March 6, 2026 |
Maximum capacity: 60 m³/hour
Maximum pressure: 15 bar (25 bar on request)
Maximum viscosity: ‹1,000,000 cPs
Maximum temperature: 140ºC
Passage: Max Solids 60 mm - Specific model and screw type
Blades: Bi-Wing or Quattro Lobe
Connections: ¾" – 4"
Connection types: Couplings: DIN11851, DIN11864-1, SMS1145 Flanges: EN1092-1, Rectangular, DIN11864-2, ANSI Tri-Clamps: ISO2852, DIN32676, DIN11864-3
Shaft seal: Single mechanical seal SIC/SIC or TC/TC Double mechanical seal SIC/SIC or TC/TCWDR Lip seal Single O-ring Double O-ring with hardening
Sealing materials: SiC / SiC or Tungsten / Tungsten
Elastomer materials EPDM, Viton, NBR, Teflon, KALREZ, e.g. according to FDA
Wetted parts: AISI 316L (AISI 316L Mo Ni or Hastelloy CX2MW N26022 on request)
Surface roughness: ‹0.8 Micron (Std), ‹0.5 on request
Hardening: Hard chrome plating and plasma nitriding (optional)
Drives Standard: IEC, IE2, B3/B5, IP55, insulation class F, PTC Optional: IE3, ATEX, CSA/UL, decentralized variable speed drive
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Flow rate | 20 m³/h |
| Max Pressure | 5 bar |
| Engine Power | 5.5 kW |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | packed |
| Datasheet | PUMPS PLP3-4 |
| Last availability date | 09/03/2026 |
This listing features a PUMPS PLP3-4 industrial pump, manufactured in 2015. The pump is designed for robust industrial applications, with a maximum flow rate of 20.0 m³/h and a maximum operating pressure of 5.0 bar. It is powered by an electric motor with an engine power rating of 5.5 kW.
The pump is constructed primarily of stainless steel, ensuring durability and resistance to corrosion, which is suitable for a wide range of fluids. It is mounted on a sturdy metal base equipped with adjustable feet, allowing for stable installation on various surfaces. The pump body includes inlet and outlet ports and bears Pomac branding on the side, indicating the manufacturer or associated brand.
The electric motor attached to the pump features a protective housing and electrical connections for safe operation. The overall condition of the pump and motor shows signs of prior use, including some water stains and minor surface wear, which may be expected in industrial equipment.
Additional technical specifications from the manufacturer include the ability to handle maximum viscosities up to 1,000,000 cPs and maximum temperatures of up to 140ºC. The pump can accommodate solids up to 60 mm in size, depending on the specific model and screw type. Various connection types are supported, including couplings (DIN11851, DIN11864-1, SMS1145), flanges (EN1092-1, Rectangular, DIN11864-2, ANSI), and tri-clamps (ISO2852, DIN32676, DIN11864-3).
The shaft sealing options include single or double mechanical seals made from silicon carbide or tungsten materials, as well as lip seals and O-rings with various elastomer materials such as EPDM, Viton, NBR, Teflon, and KALREZ, some compliant with FDA standards. Wetted parts are typically made from AISI 316L stainless steel, with options for other materials on request. Surface roughness is maintained below 0.8 microns, with options for finer finishes.
Drive standards include IEC motors with IE2 efficiency, IP55 protection, insulation class F, and PTC sensors, with optional upgrades to IE3 efficiency, ATEX certification, CSA/UL approval, and decentralized variable speed drives available.
This pump is suitable for various industrial pumping needs, offering reliable performance with robust construction and multiple customizable options to fit specific application requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 12 |
| Last activity | March 6, 2026 |
Индустриална помпа PUMPS PLP3-4
Průmyslové čerpadlo PUMPS PLP3-4
PUMPS PLP3-4 Industriel pumpe
PUMPS PLP3-4 Industriepumpe
Βιομηχανική αντλία PUMPS PLP3-4
PUMPS PLP3-4 Industrial pump
Bomba industrial PUMPS PLP3-4
Pompe industrielle PUMPS PLP3-4
Industrijska pumpa PUMPS PLP3-4
PUMPS PLP3-4 Ipari szivattyú
Pompa industriale PUMPS PLP3-4
Pramoninis siurblys PUMPS PLP3-4
PUMPS PLP3-4 Industriële pomp
Pompa Pomac PUMPS PLP3-4
Bomba industrial PUMPS PLP3-4
Pompă industrială PUMPS PLP3-4
PUMPS PLP3-4 Промышленный насос
Industrijska pumpa PUMPS PLP3-4
PUMPS PLP3-4 Industriell pump
Endüstriyel pompa PUMPS PLP3-4
EN
- Languages
English (GB)