| Manufacturer | PREISS U HORTSTMANN |
|---|---|
| Model | BAT-III-CNC |
| Year | 1996 |
| Location | Belgium
|
PREISS U HORTSTMANN BAT-III-CNC multi-spindle drilling and dowel-inserting machine, manufactured in 1996. The machine is CNC-controlled and has two axes. Its stated workpiece capacity ranges from 100 to 2,200 mm in length, 100 to 600 mm in width, and 16 to 35 mm in thickness. The listed X-axis positioning speed is 60 m/min, with Y-axis positioning at 50 m/min and positioning resolution of 0.05 mm. The drilling spindle speed is 6,000 rpm. The listed cycle times are approximately 5 seconds for drilling and insertion and approximately 2 seconds for an additional drilling cycle. CNC controls include a 12-inch monitor, memory for 250 subprograms, and an RS232 PC interface.
The machine is arranged as an enclosed industrial cell with red mesh safety fencing around the operating area. A separate control cabinet has a display, keypad, pushbuttons and keyboard shelf. Feed rails and roller or slatted conveyor sections run through the work area, with multiple processing heads positioned above the machine bed. Flexible extraction hoses are connected near the heads, and ducting is installed above and around the machine. The equipment also has an emergency-stop device on the guarding. These visible features form part of the machine installation; their operating condition is not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Multi-spindle drilling machine manufactured in 1996. This PREISS U HORTSTMANN BAT-III-CNC features a maximum workpiece length of 2,200 mm and a maximum workpiece width of 600 mm. It offers an impressive X-axis positioning speed of 60 m/min and a drilling spindle speed of 6,000 rpm. If you are looking to get high-quality drilling capabilities, consider the PREISS U HORTSTMANN BAT-III-CNC machine we have for sale. Contact us for further details.Workpiece capacity:
Minimum workpiece length: 100 mm
Maximum workpiece length: 2,200 mm
Minimum workpiece width: 100 mm
Maximum workpiece width: 600 mm
Minimum workpiece thickness: 16 mm
Maximum workpiece thickness: 35 mm
CNC control and performance:
X-axis positioning speed: 60 m/min
Y-axis positioning speed: 50 m/min
Positioning resolution: 0.05 mm
Drilling and insertion cycle: approx. 5 s
Additional drilling cycle: approx. 2 s
Drilling spindle speed: 6,000 rpm
CNC display: 12-inch monitor
Program memory: 250 subprograms
PC interface: RS232
Number of Axes: 2
Spindle Speed: 6000 RPM
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Nov. 2, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Multi-spindle drilling machine manufactured in 1996. This PREISS U HORTSTMANN BAT-III-CNC features a maximum workpiece length of 2,200 mm and a maximum workpiece width of 600 mm. It offers an impressive X-axis positioning speed of 60 m/min and a drilling spindle speed of 6,000 rpm. If you are looking to get high-quality drilling capabilities, consider the PREISS U HORTSTMANN BAT-III-CNC machine we have for sale. Contact us for further details.Workpiece capacity:
Minimum workpiece length: 100 mm
Maximum workpiece length: 2,200 mm
Minimum workpiece width: 100 mm
Maximum workpiece width: 600 mm
Minimum workpiece thickness: 16 mm
Maximum workpiece thickness: 35 mm
CNC control and performance:
X-axis positioning speed: 60 m/min
Y-axis positioning speed: 50 m/min
Positioning resolution: 0.05 mm
Drilling and insertion cycle: approx. 5 s
Additional drilling cycle: approx. 2 s
Drilling spindle speed: 6,000 rpm
CNC display: 12-inch monitor
Program memory: 250 subprograms
PC interface: RS232
Number of Axes: 2
Spindle Speed: 6000 RPM
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
PREISS U HORTSTMANN BAT-III-CNC multi-spindle drilling and dowel-inserting machine, manufactured in 1996. The machine is CNC-controlled and has two axes. Its stated workpiece capacity ranges from 100 to 2,200 mm in length, 100 to 600 mm in width, and 16 to 35 mm in thickness. The listed X-axis positioning speed is 60 m/min, with Y-axis positioning at 50 m/min and positioning resolution of 0.05 mm. The drilling spindle speed is 6,000 rpm. The listed cycle times are approximately 5 seconds for drilling and insertion and approximately 2 seconds for an additional drilling cycle. CNC controls include a 12-inch monitor, memory for 250 subprograms, and an RS232 PC interface.
The machine is arranged as an enclosed industrial cell with red mesh safety fencing around the operating area. A separate control cabinet has a display, keypad, pushbuttons and keyboard shelf. Feed rails and roller or slatted conveyor sections run through the work area, with multiple processing heads positioned above the machine bed. Flexible extraction hoses are connected near the heads, and ducting is installed above and around the machine. The equipment also has an emergency-stop device on the guarding. These visible features form part of the machine installation; their operating condition is not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Nov. 2, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Машина за пробиване и поставяне на дюбели PREISS U HORTSTMANN BAT-III-CNC
Vrtací a kolíkovací stroj PREISS U HORTSTMANN BAT-III-CNC
PREISS U HORTSTMANN BAT-III-CNC Bore- og dyvelisætningsmaskine
PREISS U HORTSTMANN BAT-III-CNC Bohr- und Dübelleimmaschine
Μηχανή διάτρησης και εισαγωγής καβιλιών PREISS U HORTSTMANN BAT-III-CNC
PREISS U HORTSTMANN BAT-III-CNC Drilling and doweling machine
Máquina de taladrado e inserción de espigas PREISS U HORTSTMANN BAT-III-CNC
Machine de perçage et d’insertion de tourillons PREISS U HORTSTMANN BAT-III-CNC
Stroj za bušenje i umetanje tiplova PREISS U HORTSTMANN BAT-III-CNC
PREISS U HORTSTMANN BAT-III-CNC Fúró- és csapbehelyező gép
Macchina per foratura e inserimento di tasselli PREISS U HORTSTMANN BAT-III-CNC
PREISS U HORTSTMANN BAT-III-CNC Gręžimo ir kaiščių įstatymo staklės
PREISS U HORTSTMANN BAT-III-CNC Boor- en deuvelinzetmachine
Maszyna do wiercenia i osadzania kołków PREISS U HORTSTMANN BAT-III-CNC
Máquina de furação e inserção de cavilhas PREISS U HORTSTMANN BAT-III-CNC
Mașină de găurire și inserare de dibluri PREISS U HORTSTMANN BAT-III-CNC
PREISS U HORTSTMANN BAT-III-CNC Станок для сверления и установки шкантов
Mašina za bušenje i umetanje tiplova PREISS U HORTSTMANN BAT-III-CNC
PREISS U HORTSTMANN BAT-III-CNC Borr- och dymlingsinsättningsmaskin
Delme ve dübel yerleştirme makinesi PREISS U HORTSTMANN BAT-III-CNC
EN
- Languages
English (GB)