Contact us to receive an offer.
| Manufacturer | Pinacho |
|---|---|
| Model | L1 200 |
| Year | |
| Location | Spain
|
Pinacho L1 200 - Parallel Lathe (1100 mm between centers)
Overview
Manufacturer: Pinacho
Model: L1 200
The listing specifies a 1100 mm distance between centers and includes common lathe capacities and controls for manual turning and threading operations.
Key specifications (as stated in the listing)
- Distance between centers: 1100 mm
- Swing over bed (Ø above the bed): 400 mm
- Swing over gap (diameter in the gap): 640 mm
- Swing over cross slide (Ø above transversing slide): 215 mm
- Spindle bore: 42 mm
- Bed width: 300 mm
- Speeds: 18 speed steps; 32 – 1800 rpm range
- Motor: 5.5 HP
Included components and accessories (visible)
- Three-jaw chuck mounted on the spindle
- Additional jaws and several toolpost holders/tool blocks placed on the headstock cover
- Small round indexing/faceplate-type accessory among the spare tooling
- Standalone steady rest (or similar support) positioned with the machine
- Carriage assembly with cross slide, compound rest and toolpost; a cutting tool and clamps are installed in the toolpost
- Tailstock with handwheel and center
- Flexible gooseneck lamp or coolant hose attached near the compound/toolpost area
Controls and features (visible)
- Headstock apron with multiple levers and selection dials for speed/gear selection
- Lower apron gear/lead-screw selector with a lever for thread/feed selection
- Threading charts marked “MODUL”, “METRICO”, “WHITWORTH” and speed markings on the control panel
Condition (visible)
- General paint wear, chips and scratches on cabinet, headstock panel and control knobs
- Localized surface rust/staining on cabinet and bed areas
- Bed ways show shiny worn sliding surfaces, grime/oil residue and minor surface staining/debris
- Surface wear visible on the chuck face
Notes
- The listing description states the machine is in good condition. Prospective buyers should inspect the machine in person or request additional operational information and testing before purchase. No claims of testing, refurbishment, or warranty are made in the listing.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Pinacho L1 200 Lathe 1100 mm Between Centers
Main features
Manufacturer: Pinacho
Model: L1 200
Capacities:
• Distance between centers: 1100 mm
• Swing over bed: 400 mm
• Swing over gap: 640 mm
• Swing over cross slide: 215 mm
• Spindle bore: 42 mm
• Bed width: 300 mm
Speeds:
• 18 speeds ranging from 32–1800 rpm
Motor:
• Power: 5.5 HP
General condition:
• Machine in good condition
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2016 |
| Offers online | 66 |
| Last activity | Oct. 24, 2026 |
Pinacho L1 200 Lathe 1100 mm Between Centers
Main features
Manufacturer: Pinacho
Model: L1 200
Capacities:
• Distance between centers: 1100 mm
• Swing over bed: 400 mm
• Swing over gap: 640 mm
• Swing over cross slide: 215 mm
• Spindle bore: 42 mm
• Bed width: 300 mm
Speeds:
• 18 speeds ranging from 32–1800 rpm
Motor:
• Power: 5.5 HP
General condition:
• Machine in good condition
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Pinacho L1 200 - Parallel Lathe (1100 mm between centers)
Overview
Manufacturer: Pinacho
Model: L1 200
The listing specifies a 1100 mm distance between centers and includes common lathe capacities and controls for manual turning and threading operations.
Key specifications (as stated in the listing)
- Distance between centers: 1100 mm
- Swing over bed (Ø above the bed): 400 mm
- Swing over gap (diameter in the gap): 640 mm
- Swing over cross slide (Ø above transversing slide): 215 mm
- Spindle bore: 42 mm
- Bed width: 300 mm
- Speeds: 18 speed steps; 32 – 1800 rpm range
- Motor: 5.5 HP
Included components and accessories (visible)
- Three-jaw chuck mounted on the spindle
- Additional jaws and several toolpost holders/tool blocks placed on the headstock cover
- Small round indexing/faceplate-type accessory among the spare tooling
- Standalone steady rest (or similar support) positioned with the machine
- Carriage assembly with cross slide, compound rest and toolpost; a cutting tool and clamps are installed in the toolpost
- Tailstock with handwheel and center
- Flexible gooseneck lamp or coolant hose attached near the compound/toolpost area
Controls and features (visible)
- Headstock apron with multiple levers and selection dials for speed/gear selection
- Lower apron gear/lead-screw selector with a lever for thread/feed selection
- Threading charts marked “MODUL”, “METRICO”, “WHITWORTH” and speed markings on the control panel
Condition (visible)
- General paint wear, chips and scratches on cabinet, headstock panel and control knobs
- Localized surface rust/staining on cabinet and bed areas
- Bed ways show shiny worn sliding surfaces, grime/oil residue and minor surface staining/debris
- Surface wear visible on the chuck face
Notes
- The listing description states the machine is in good condition. Prospective buyers should inspect the machine in person or request additional operational information and testing before purchase. No claims of testing, refurbishment, or warranty are made in the listing.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2016 |
| Offers online | 66 |
| Last activity | Oct. 24, 2026 |
Паралелен струг Pinacho L1 200
Hrotový soustruh Pinacho L1 200
Pinacho L1 200 Konventionel drejebænk
Pinacho L1 200 Spitzendrehmaschine
Παράλληλος τόρνος Pinacho L1 200
Pinacho L1 200 Parallel lathe
Torno paralelo Pinacho L1 200
Tour parallèle Pinacho L1 200
Paralelni tokarski stroj Pinacho L1 200
Pinacho L1 200 Csúcseszterga
Tornio parallelo Pinacho L1 200
Pinacho L1 200 Lygiagrečios tekinimo staklės
Pinacho L1 200 Conventionele draaibank
Tokarka kłowa Pinacho L1 200
Torno paralelo Pinacho L1 200
Strung paralel Pinacho L1 200
Pinacho L1 200 Токарно-винторезный станок
Paralelni strug Pinacho L1 200
Pinacho L1 200 Konventionell svarv
Paralel torna Pinacho L1 200
EN
- Languages
English (GB)