Contact us to receive an offer.
| Manufacturer | PHM |
|---|---|
| Model | m3 |
| Year | 2014 |
| Location | Turkey
|
The PHM M3 is a laboratory microscope designed for advanced digital holographic microscopy applications. Manufactured in 2014, this device features a distinctive curved white and red casing and includes a stage platform suitable for holding various sample containers such as multi-well plates and small round or rectangular vessels. The stage platform supports samples securely for observation and is compatible with standard cell culture vessels.
This microscope utilizes single wavelength transmission digital holographic microscopy as its measurement technique, capable of producing intensity and quantitative phase contrast images in DH mode, as well as phase contrast images in PC mode. It is equipped with a monochromatic laser source for DH mode and a Luxeon 1 watt LED for PC mode illumination.
Optical components include a 4-position objective turret with manual or automated function, housing standard objectives ranging from 10x to 100x magnification. Objective lenses are positioned below the stage platform and are designed to provide lateral resolution down to 500 nm with a 100x objective. The device includes a focus adjustment knob located on the side for precise focusing.
The sample stage offers manual or automated XY movement with up to 150 mm by 120 mm travel range, and an automated Z stage with up to 20 mm travel range. The camera system supports resolutions of 1280 × 1024 pixels with 8 or 10 bits for holograms, and 2048 × 1536 pixels with 8-bit RGB for phase contrast images.
The PHM M3 microscope is powered by 230 VAC at 50/60 Hz and consumes a maximum of 83 W excluding the computer. Its dimensions are 650 × 360 × 560 mm, and it weighs approximately 35 kg. The equipment is observed to be clean and in good physical condition with no visible damage, suitable for use in medical and laboratory environments.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Holomonitor 600 M3 Tracking
System
Measurement technique: single wavelength transmission digital holographic microscopy
Image types: intensity and quantitative phase contrast image (DH mode)
phase contrast image (PC mode)
Light source: monochromatic laser source (DH mode)
Luxeon 1 watt LED (PC mode)
Sample stage: manual or automated XY stage up to 150 mm × 120 mm travel
range automated Z stage up to 20mm travel range
Camera 1280 × 1024 pixels, 8 or 10 bits (hologram)
2048 × 1536 pixels, 8 bit RGB (phase contrast)
Available objectives: standard objectives 10-100x
Objective mounting: 4-position objective turret with manual or automated function
Computer: PC workstation with latest Intel processor.
Software: Holostudio™ imaging and cell analyze software
Performance
Lateral resolution: objective dependent, down to 500 nm 100x objective
Field of view: objective dependent, up to 4 mm
Working distance: objective dependent, from 0.3 to 18 mm
Digital focusing range: up to 50× depth of field (objective dependent)
Grabbing time: down to 4 μs in a single image grab (no scanning mechanism,
insensitive to vibrations)
Spatial sampling: 1024 × 1024 pixels (hologram)
Acquisition rate: 27.5 fps (1024 × 1024 pixels)
Reconstruction rate: 4 fps (512 × 512 pixels), 1 fps (1024 × 1024 pixels)
Sample illumination: ~0.1 mW/cm2
Maximum container height: 60mm
Power requirements
Input voltage: 230 VAC - 50/60 Hz
Power requirements
(w/o computer):
max. 83 W
Dimensions & weight
Dimensions (L × W × H): 650 × 360 × 560 mm
Weight: 35 kg
Samples
Cells Eukaryotic adherent monolayer cells in any standard cell culture
vessel or suspension cells in IBIDI µ-slides.
Culture vessels Any standard culture flask or petri dish, multi well plates down to
24-wells, any IBIDI µ-slide
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2021 |
| Offers online | 1 |
| Last activity | Sept. 22, 2021 |
Holomonitor 600 M3 Tracking
System
Measurement technique: single wavelength transmission digital holographic microscopy
Image types: intensity and quantitative phase contrast image (DH mode)
phase contrast image (PC mode)
Light source: monochromatic laser source (DH mode)
Luxeon 1 watt LED (PC mode)
Sample stage: manual or automated XY stage up to 150 mm × 120 mm travel
range automated Z stage up to 20mm travel range
Camera 1280 × 1024 pixels, 8 or 10 bits (hologram)
2048 × 1536 pixels, 8 bit RGB (phase contrast)
Available objectives: standard objectives 10-100x
Objective mounting: 4-position objective turret with manual or automated function
Computer: PC workstation with latest Intel processor.
Software: Holostudio™ imaging and cell analyze software
Performance
Lateral resolution: objective dependent, down to 500 nm 100x objective
Field of view: objective dependent, up to 4 mm
Working distance: objective dependent, from 0.3 to 18 mm
Digital focusing range: up to 50× depth of field (objective dependent)
Grabbing time: down to 4 μs in a single image grab (no scanning mechanism,
insensitive to vibrations)
Spatial sampling: 1024 × 1024 pixels (hologram)
Acquisition rate: 27.5 fps (1024 × 1024 pixels)
Reconstruction rate: 4 fps (512 × 512 pixels), 1 fps (1024 × 1024 pixels)
Sample illumination: ~0.1 mW/cm2
Maximum container height: 60mm
Power requirements
Input voltage: 230 VAC - 50/60 Hz
Power requirements
(w/o computer):
max. 83 W
Dimensions & weight
Dimensions (L × W × H): 650 × 360 × 560 mm
Weight: 35 kg
Samples
Cells Eukaryotic adherent monolayer cells in any standard cell culture
vessel or suspension cells in IBIDI µ-slides.
Culture vessels Any standard culture flask or petri dish, multi well plates down to
24-wells, any IBIDI µ-slide
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The PHM M3 is a laboratory microscope designed for advanced digital holographic microscopy applications. Manufactured in 2014, this device features a distinctive curved white and red casing and includes a stage platform suitable for holding various sample containers such as multi-well plates and small round or rectangular vessels. The stage platform supports samples securely for observation and is compatible with standard cell culture vessels.
This microscope utilizes single wavelength transmission digital holographic microscopy as its measurement technique, capable of producing intensity and quantitative phase contrast images in DH mode, as well as phase contrast images in PC mode. It is equipped with a monochromatic laser source for DH mode and a Luxeon 1 watt LED for PC mode illumination.
Optical components include a 4-position objective turret with manual or automated function, housing standard objectives ranging from 10x to 100x magnification. Objective lenses are positioned below the stage platform and are designed to provide lateral resolution down to 500 nm with a 100x objective. The device includes a focus adjustment knob located on the side for precise focusing.
The sample stage offers manual or automated XY movement with up to 150 mm by 120 mm travel range, and an automated Z stage with up to 20 mm travel range. The camera system supports resolutions of 1280 × 1024 pixels with 8 or 10 bits for holograms, and 2048 × 1536 pixels with 8-bit RGB for phase contrast images.
The PHM M3 microscope is powered by 230 VAC at 50/60 Hz and consumes a maximum of 83 W excluding the computer. Its dimensions are 650 × 360 × 560 mm, and it weighs approximately 35 kg. The equipment is observed to be clean and in good physical condition with no visible damage, suitable for use in medical and laboratory environments.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2021 |
| Offers online | 1 |
| Last activity | Sept. 22, 2021 |
Оборудване за мониторинг на пациенти PHM m3
Zařízení pro monitorování pacientů PHM m3
PHM m3 Patientovervågningsudstyr
PHM m3 Patientenüberwachungsgerät
Εξοπλισμός παρακολούθησης ασθενών PHM m3
PHM m3 Patient monitoring equipment
Equipo de monitorización de pacientes PHM m3
Équipement de surveillance des patients PHM m3
Oprema za praćenje pacijenata PHM m3
PHM m3 Betegmegfigyelő berendezés
Apparecchiatura per monitoraggio pazienti PHM m3
PHM m3 Pacientų stebėjimo įranga
PHM m3 Patiëntbewakingsapparatuur
Urządzenie do monitorowania pacjentów PHM m3
Equipamento de monitorização de pacientes PHM m3
Echipament de monitorizare a pacienților PHM m3
PHM m3 Оборудование для мониторинга пациентов
Oprema za praćenje pacijenata PHM m3
PHM m3 Patientövervakningsutrustning
Hasta izleme ekipmanı PHM m3
EN
- Languages
English (GB)