Contact us to receive an offer.
| Category | Wood chipping machines |
| Engine power | 110 kW |
| Weight | 4500 kg |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | yes |
| status | visible but unplugged |
| Datasheet | Pezzolato PTH 700/660 |
| Last availability date | 29/09/2026 |
| Product id | P260925205 |
| Language |
Pezzolato PTH 700/660 E — Industrial Drum Chipper, Electric 110 kW, with Infeed Conveyor (2016)
Year of manufacture: 2016 · Total installed power: 114.4 kW · Weight: 4,500 kg
Type: Stationary industrial wood chipper, electric drive · Included: infeed conveyor for logs and sawmill residue
Overview
Pezzolato PTH 700/660 E industrial drum chipper with electric drive, supplied complete with its infeed conveyor. Built for continuous production of fuel-grade wood chips from small-diameter logs and sawmill residue.
This unit is configured above standard specification. The series PTH 700/660 E is normally supplied with a 75 kW drive; this machine left the factory with a 110 kW main motor. In practice the extra power does not raise the catalogue hourly figure so much as it allows that figure to be sustained in larger-diameter, denser and wetter timber without the drum stalling.
The closed drum design, with counter-knife and interchangeable calibration grid, produces uniform chips regardless of the shape and species of the incoming material.
Output
The manufacturer quotes 40–50 loose m³ of chips per hour for this configuration, equivalent to roughly 16–20 m³ of solid wood input per hour.
That figure applies to continuous feeding with clean, straight logs of optimal diameter. Actual output depends on species, log diameter and form, moisture content, the chip size selected and how consistently material reaches the machine.
Chip size
The drum is fitted with knives, a counter-knife and an interchangeable calibration grid. Chip size is changed by swapping the grid, so the machine is not tied to a single fraction — the same unit can serve a boiler taking coarse chips today and a finer specification later.
Technical specification
Drum diameter 660 mm
Drum width 640 mm
Feed opening 400 × 640 mm
***** diameter 360 mm
Feed roller diameter 520 mm
Chamber diameter 740 mm
Drum speed 830 rpm
Blade speed 29 m/s
Main drive motor 110 kW (148 HP)
Feed roller motors 2 × 2.2 kW
Total installed power 114.4 kW
Hydraulic working pressure 50 bar
Weight 4,500 kg
Airborne noise level 107 dB
Three electric motors: one driving the drum, two driving the upper and lower feed rollers. Material is delivered by the included conveyor, which takes both round logs and sawmill offcuts.
Electrical requirements
400 V, 50 Hz, three-phase. Rated current 187 A. A three-phase industrial supply is required. Prospective buyers should confirm that the connection at their site is rated for the installed load before purchase.
Condition and history
Stated plainly. The machine was purchased from a pallet manufacturer in working condition. It has not been operated at our premises — since acquisition it has been stored under cover.
Because it has not run here, we cannot demonstrate it under load and we do not warrant output under the buyer's conditions. The machine is sold as it stands, with full inspection available before purchase.
After a long period standing, recommissioning should be budgeted for in the usual way: lubrication and bearing check, hydraulic oil and fluid replacement, inspection of hoses and seals, insulation testing of the motors, and inspection, sharpening or replacement of the knives and counter-knife. The price is set with this in mind.
The electronic control panel logs operating data and generates scheduled and unscheduled maintenance prompts in line with the manufacturer's service plan. Records are available for inspection.
Certification and documentation
CE marked — manufacturer's nameplate present and legible on the machine, stating model, serial number, year and rated data
Original manufacturer's documentation available and handed over with the machine
Motor nameplates present on all three motors, IE2/IE3 efficiency class
Control panel service records open to inspection
Delivery terms
Terms:
Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Oct. 12, 2026 |
Pezzolato PTH 700/660 E — Industrial Drum Chipper, Electric 110 kW, with Infeed Conveyor (2016)
Year of manufacture: 2016 · Total installed power: 114.4 kW · Weight: 4,500 kg
Type: Stationary industrial wood chipper, electric drive · Included: infeed conveyor for logs and sawmill residue
Overview
Pezzolato PTH 700/660 E industrial drum chipper with electric drive, supplied complete with its infeed conveyor. Built for continuous production of fuel-grade wood chips from small-diameter logs and sawmill residue.
This unit is configured above standard specification. The series PTH 700/660 E is normally supplied with a 75 kW drive; this machine left the factory with a 110 kW main motor. In practice the extra power does not raise the catalogue hourly figure so much as it allows that figure to be sustained in larger-diameter, denser and wetter timber without the drum stalling.
The closed drum design, with counter-knife and interchangeable calibration grid, produces uniform chips regardless of the shape and species of the incoming material.
Output
The manufacturer quotes 40–50 loose m³ of chips per hour for this configuration, equivalent to roughly 16–20 m³ of solid wood input per hour.
That figure applies to continuous feeding with clean, straight logs of optimal diameter. Actual output depends on species, log diameter and form, moisture content, the chip size selected and how consistently material reaches the machine.
Chip size
The drum is fitted with knives, a counter-knife and an interchangeable calibration grid. Chip size is changed by swapping the grid, so the machine is not tied to a single fraction — the same unit can serve a boiler taking coarse chips today and a finer specification later.
Technical specification
Drum diameter 660 mm
Drum width 640 mm
Feed opening 400 × 640 mm
***** diameter 360 mm
Feed roller diameter 520 mm
Chamber diameter 740 mm
Drum speed 830 rpm
Blade speed 29 m/s
Main drive motor 110 kW (148 HP)
Feed roller motors 2 × 2.2 kW
Total installed power 114.4 kW
Hydraulic working pressure 50 bar
Weight 4,500 kg
Airborne noise level 107 dB
Three electric motors: one driving the drum, two driving the upper and lower feed rollers. Material is delivered by the included conveyor, which takes both round logs and sawmill offcuts.
Electrical requirements
400 V, 50 Hz, three-phase. Rated current 187 A. A three-phase industrial supply is required. Prospective buyers should confirm that the connection at their site is rated for the installed load before purchase.
Condition and history
Stated plainly. The machine was purchased from a pallet manufacturer in working condition. It has not been operated at our premises — since acquisition it has been stored under cover.
Because it has not run here, we cannot demonstrate it under load and we do not warrant output under the buyer's conditions. The machine is sold as it stands, with full inspection available before purchase.
After a long period standing, recommissioning should be budgeted for in the usual way: lubrication and bearing check, hydraulic oil and fluid replacement, inspection of hoses and seals, insulation testing of the motors, and inspection, sharpening or replacement of the knives and counter-knife. The price is set with this in mind.
The electronic control panel logs operating data and generates scheduled and unscheduled maintenance prompts in line with the manufacturer's service plan. Records are available for inspection.
Certification and documentation
CE marked — manufacturer's nameplate present and legible on the machine, stating model, serial number, year and rated data
Original manufacturer's documentation available and handed over with the machine
Motor nameplates present on all three motors, IE2/IE3 efficiency class
Control panel service records open to inspection
Delivery terms
Terms:
Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.
| Category | Wood chipping machines |
| Engine power | 110 kW |
| Weight | 4500 kg |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | yes |
| status | visible but unplugged |
| Datasheet | Pezzolato PTH 700/660 |
| Last availability date | 29/09/2026 |
| Product id | P260925205 |
| Language |
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Oct. 12, 2026 |