| Manufacturer | Otinus |
|---|---|
| Model | PCV-3015-DG |
| Year | |
| Location | USA
|
Otinus plasma and gas cutting machine for fabrication and plate-cutting applications. The machine has an XY working area and a welded structure, with adjustable support legs and a downdraft table included. The gantry clearance and working area are intended to accommodate a range of cutting tasks, while the downdraft table supports extraction beneath the cutting area.
The machine is described as compatible with Hypertherm Powermax and MAXPRO plasma sources. For gas cutting, it can be used with a Harris gas torch and oxygen and propane. The stated applications include cutting plate for structural components, enclosures, concrete embed plates and other fabrication work. Cutting performance and material capability depend on the selected source, material and configuration.
The product information describes options for different source power levels, as well as higher-output configurations and nesting software. It also states that on-site installation and operator training are included. Service and parts support are offered through the seller’s U.S.-based team.
This description does not specify the machine’s present condition or confirm that it has been tested or is operational. Confirm the configuration, included components, compatibility requirements and service arrangements with the seller before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
OTINUS SPECIAL OFFER: 0% FINANCING! Don't wait for a better moment – it's now. Otinus machines with financing at no extra cost. A straightforward offer: you only pay the cost of the machine. Optimize your taxes in 2026 and choose reliable equipment. Contact us to find out more!
Specifications
Working specifications:
-XY working area: 60x120 in
-Clearance between the table surface and gantry beam: 9 in
-Idle speed: 985 in/min
Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources.
-Maximum thickness of cut sheet metal in gas cutting: 6 in
-Types of gases that can be used for cutting with a gas torch from Harris: oxygen + propane
Structure specifications:
-Length x width x height: 144 x 90 x 59 in
-Total weight: 2700 lb
-Max load: 5600 lb
-Adjustable support legs: 6 pcs
Welded structure for stable machine operation.
The device comes with a downdraft table.
Built for Performance. Backed by Support.
Built for heavy-duty fabrication, it cuts thick plate for structural components, enclosures, concrete embed plates and much more, all at a remarkably low cost per part.
Installation & Operator Training Included
We provide on-site machine installation and operator training at no additional cost, helping your team get up and running and operate your equipment with confidence.
Precision You Can Rely On
Quality plasma sources from Hypertherm, torches and industrial components deliver consistent cutting performance, accuracy, and repeatable results across a wide range of applications.
Responsive Service & Parts Support
Our U.S.-based team and stocked parts inventory in Bloomingdale, Illinois, help minimize downtime and keep your operation moving. We respond to service inquiries within 72 hours.
Solutions for a Wide Range of Applications
With source power options from 45 to 105 Amps, you can choose a machine suited to your production needs, from thin sheet metal to plate up to 20 mm (3/4 in.), depending on material type and source capacity.
24-Month Warranty
Every machine is backed by a 24-month warranty, giving you added confidence in your equipment investment.
Performance That Makes Business Sense
We focus on delivering reliable equipment, practical features, and competitive pricing to help manufacturers improve productivity and get more value from their investment.
Configure Your Plasma to Fit Your Needs
Looking for more than a standard configuration? Ask us about higher output power and nesting software.
Become an Otinus Partner
Know manufacturers who could benefit from our equipment, or already operate an Otinus machine? Ask us about our partner program and earn commissions on qualifying sales resulting from your referrals or participation.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery manufacturer |
| Active since | 2026 |
| Offers online | 22 |
| Last activity | Oct. 30, 2026 |
Otinus Corp. is a U.S.-based provider of high-performance metalworking machinery, empowering manufacturers to work faster, smarter, and more efficiently. Headquartered in the United States, Otinus delivers advanced CNC solutions tailored to the evolving needs of modern fabrication shops and industrial producers.
Specializing in laser cutting systems, tube lasers, press brakes, plasma cutters, and guillotine shears, Otinus offers a carefully selected portfolio of machines built for precision, durability, and consistent output. Each solution is designed to optimize production workflows, reduce operating costs, and help customers stay competitive in demanding markets.
What sets Otinus apart is its customer-first approach. With machines stocked locally for fast delivery, flexible financing options, and end-to-end support including installation, training, and technical service, Otinus ensures a seamless experience from purchase to production. Their team works closely with clients to recommend the right equipment for specific applications, production volumes, and growth plans.
Serving customers across the U.S. and internationally, Otinus Corp. combines global manufacturing expertise with reliable local support. For businesses seeking dependable technology, rapid ROI, and a trusted long-term partner, Otinus is the smart choice in metal fabrication solutions.
OTINUS SPECIAL OFFER: 0% FINANCING! Don't wait for a better moment – it's now. Otinus machines with financing at no extra cost. A straightforward offer: you only pay the cost of the machine. Optimize your taxes in 2026 and choose reliable equipment. Contact us to find out more!
Specifications
Working specifications:
-XY working area: 60x120 in
-Clearance between the table surface and gantry beam: 9 in
-Idle speed: 985 in/min
Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources.
-Maximum thickness of cut sheet metal in gas cutting: 6 in
-Types of gases that can be used for cutting with a gas torch from Harris: oxygen + propane
Structure specifications:
-Length x width x height: 144 x 90 x 59 in
-Total weight: 2700 lb
-Max load: 5600 lb
-Adjustable support legs: 6 pcs
Welded structure for stable machine operation.
The device comes with a downdraft table.
Built for Performance. Backed by Support.
Built for heavy-duty fabrication, it cuts thick plate for structural components, enclosures, concrete embed plates and much more, all at a remarkably low cost per part.
Installation & Operator Training Included
We provide on-site machine installation and operator training at no additional cost, helping your team get up and running and operate your equipment with confidence.
Precision You Can Rely On
Quality plasma sources from Hypertherm, torches and industrial components deliver consistent cutting performance, accuracy, and repeatable results across a wide range of applications.
Responsive Service & Parts Support
Our U.S.-based team and stocked parts inventory in Bloomingdale, Illinois, help minimize downtime and keep your operation moving. We respond to service inquiries within 72 hours.
Solutions for a Wide Range of Applications
With source power options from 45 to 105 Amps, you can choose a machine suited to your production needs, from thin sheet metal to plate up to 20 mm (3/4 in.), depending on material type and source capacity.
24-Month Warranty
Every machine is backed by a 24-month warranty, giving you added confidence in your equipment investment.
Performance That Makes Business Sense
We focus on delivering reliable equipment, practical features, and competitive pricing to help manufacturers improve productivity and get more value from their investment.
Configure Your Plasma to Fit Your Needs
Looking for more than a standard configuration? Ask us about higher output power and nesting software.
Become an Otinus Partner
Know manufacturers who could benefit from our equipment, or already operate an Otinus machine? Ask us about our partner program and earn commissions on qualifying sales resulting from your referrals or participation.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Otinus plasma and gas cutting machine for fabrication and plate-cutting applications. The machine has an XY working area and a welded structure, with adjustable support legs and a downdraft table included. The gantry clearance and working area are intended to accommodate a range of cutting tasks, while the downdraft table supports extraction beneath the cutting area.
The machine is described as compatible with Hypertherm Powermax and MAXPRO plasma sources. For gas cutting, it can be used with a Harris gas torch and oxygen and propane. The stated applications include cutting plate for structural components, enclosures, concrete embed plates and other fabrication work. Cutting performance and material capability depend on the selected source, material and configuration.
The product information describes options for different source power levels, as well as higher-output configurations and nesting software. It also states that on-site installation and operator training are included. Service and parts support are offered through the seller’s U.S.-based team.
This description does not specify the machine’s present condition or confirm that it has been tested or is operational. Confirm the configuration, included components, compatibility requirements and service arrangements with the seller before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery manufacturer |
| Active since | 2026 |
| Offers online | 22 |
| Last activity | Oct. 30, 2026 |
Otinus Corp. is a U.S.-based provider of high-performance metalworking machinery, empowering manufacturers to work faster, smarter, and more efficiently. Headquartered in the United States, Otinus delivers advanced CNC solutions tailored to the evolving needs of modern fabrication shops and industrial producers.
Specializing in laser cutting systems, tube lasers, press brakes, plasma cutters, and guillotine shears, Otinus offers a carefully selected portfolio of machines built for precision, durability, and consistent output. Each solution is designed to optimize production workflows, reduce operating costs, and help customers stay competitive in demanding markets.
What sets Otinus apart is its customer-first approach. With machines stocked locally for fast delivery, flexible financing options, and end-to-end support including installation, training, and technical service, Otinus ensures a seamless experience from purchase to production. Their team works closely with clients to recommend the right equipment for specific applications, production volumes, and growth plans.
Serving customers across the U.S. and internationally, Otinus Corp. combines global manufacturing expertise with reliable local support. For businesses seeking dependable technology, rapid ROI, and a trusted long-term partner, Otinus is the smart choice in metal fabrication solutions.
Плазмен режещ машинa Otinus PCV-3015-DG
Plazmový řezací stroj Otinus PCV-3015-DG
Otinus PCV-3015-DG Plasmaskæremaskine
Otinus PCV-3015-DG Plasmaschneidmaschine
Μηχανή κοπής πλάσματος Otinus PCV-3015-DG
IN STOCK - USA Plasma & Gas cutting machine Otinus for metal cutting with oxygen and propane
Máquina de corte por plasma Otinus PCV-3015-DG
Machine de découpe plasma Otinus PCV-3015-DG
Stroj za plazma rezanje Otinus PCV-3015-DG
Otinus PCV-3015-DG Plazmavágó gép
Macchina da taglio al plasma Otinus PCV-3015-DG
Plazminio pjovimo staklės Otinus PCV-3015-DG
Otinus PCV-3015-DG Plasmasnijmachine
Maszyna do cięcia plazmowego Otinus PCV-3015-DG
Máquina de corte a plasma Otinus PCV-3015-DG
Mașină de tăiat cu plasmă Otinus PCV-3015-DG
Otinus PCV-3015-DG Плазменный станок для резки
Mašina za plazma sečenje Otinus PCV-3015-DG
Otinus PCV-3015-DG Plasmaskärmaskin
Plazma kesme makinesi Otinus PCV-3015-DG
EN
- Languages
English (GB)