Contact us to receive an offer.
| Manufacturer | OMCCA |
|---|---|
| Model | HDTS 2050X22MM |
| Year | 2004 |
| Location | Italy
|
OMCCA HDTS 2050X22MM four-roll plate bending machine, manufactured in 2004. This hydraulic machine has a working length of 2050 mm and a listed maximum plate thickness of 22 mm. Prebending is specified. The upper roll is 320 mm in diameter, and the lower and lateral rolls are 290 mm in diameter. The machine’s listed dimensions are 4400 × 2050 × 1660 mm, with a weight of 9800 kg and engine power of 15 kW.
The machine has four cylindrical rolls and a freestanding control console positioned in front. The console is equipped with push buttons, switches and digital displays; the current specification also describes joystick controls and digital roll-position readouts. The listed configuration includes hydraulically operated opening of the top roll for plate unloading, a conical bending attachment, and variable-speed roll rotation. The description specifies rotation driven by the upper and lower central rolls and hardened rolls.
Visible condition includes scuffed and chipped paint on the machine panels, support structure and control stand. The roller surfaces appear dark and marked, and there is dirt and paint wear around the lower enclosure and base. Orange safety bars and a red safety line are present across the front area. A curved sheet-metal piece is shown beside the machine on a pallet; its inclusion with the machine is not specified.
No claim is made here about operating condition or testing. Please refer to the stated specifications and visible wear when assessing suitability.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
PLATE BENDING MACHINE
4 ROLL HYDRAULIC 2000 X 22 MM DUAL INITIAL PINCH
Bending capacity
Plate width 2000 mm
Rolling plate thickness 22 mm
Prebend thickness 16 mm
Minimum bending diameter ID 400 mm
Rolls dimensions:
Useful length 2050 mm
central rolls upper/lower D 320 mm
side rolls left/right D 290 mm
Hardened rolls high strength
Driven rollers rotation central upper and lower
Conical bending attachment side rolls tiltable to form cones, contrast pad roller type.
Opening of top roll hydraulic drop-end to unload the plate being formed
wide opening plate feed up to 90 mm between the central rollers
Variable speed working roll bending rotation automatic slow/fast
Console electric on wheels with centralized commands joysticks and digital readout 3 axis.
Digital position readouts of the rolls
Power electric 15 Kw voltage 3-phase 380 /50
Dimension 4400 x2050 x H 1660 mm - weight 9800kgs
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 22 |
| Last activity | Nov. 1, 2026 |
PLATE BENDING MACHINE
4 ROLL HYDRAULIC 2000 X 22 MM DUAL INITIAL PINCH
Bending capacity
Plate width 2000 mm
Rolling plate thickness 22 mm
Prebend thickness 16 mm
Minimum bending diameter ID 400 mm
Rolls dimensions:
Useful length 2050 mm
central rolls upper/lower D 320 mm
side rolls left/right D 290 mm
Hardened rolls high strength
Driven rollers rotation central upper and lower
Conical bending attachment side rolls tiltable to form cones, contrast pad roller type.
Opening of top roll hydraulic drop-end to unload the plate being formed
wide opening plate feed up to 90 mm between the central rollers
Variable speed working roll bending rotation automatic slow/fast
Console electric on wheels with centralized commands joysticks and digital readout 3 axis.
Digital position readouts of the rolls
Power electric 15 Kw voltage 3-phase 380 /50
Dimension 4400 x2050 x H 1660 mm - weight 9800kgs
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
OMCCA HDTS 2050X22MM four-roll plate bending machine, manufactured in 2004. This hydraulic machine has a working length of 2050 mm and a listed maximum plate thickness of 22 mm. Prebending is specified. The upper roll is 320 mm in diameter, and the lower and lateral rolls are 290 mm in diameter. The machine’s listed dimensions are 4400 × 2050 × 1660 mm, with a weight of 9800 kg and engine power of 15 kW.
The machine has four cylindrical rolls and a freestanding control console positioned in front. The console is equipped with push buttons, switches and digital displays; the current specification also describes joystick controls and digital roll-position readouts. The listed configuration includes hydraulically operated opening of the top roll for plate unloading, a conical bending attachment, and variable-speed roll rotation. The description specifies rotation driven by the upper and lower central rolls and hardened rolls.
Visible condition includes scuffed and chipped paint on the machine panels, support structure and control stand. The roller surfaces appear dark and marked, and there is dirt and paint wear around the lower enclosure and base. Orange safety bars and a red safety line are present across the front area. A curved sheet-metal piece is shown beside the machine on a pallet; its inclusion with the machine is not specified.
No claim is made here about operating condition or testing. Please refer to the stated specifications and visible wear when assessing suitability.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 22 |
| Last activity | Nov. 1, 2026 |
Четиривалова машина за огъване на листов материал OMCCA HDTS 2050X22MM
Čtyřválcová zakružovačka plechu OMCCA HDTS 2050X22MM
OMCCA HDTS 2050X22MM 4-valset pladevalsemaskine
OMCCA HDTS 2050X22MM 4-Walzen-Blechbiegemaschine
Κυλινδρομηχανή λαμαρίνας 4 κυλίνδρων OMCCA HDTS 2050X22MM
OMCCA HDTS 2050X22MM 4-roll plate rolling machine
Cilindros curvadores de chapa de 4 rodillos OMCCA HDTS 2050X22MM
Rouleuse de tôle à 4 rouleaux OMCCA HDTS 2050X22MM
Četverovaljni valjak za savijanje lima OMCCA HDTS 2050X22MM
OMCCA HDTS 2050X22MM Négyhengeres lemezhengerítő gép
Calandra per lamiera a 4 rulli OMCCA HDTS 2050X22MM
OMCCA HDTS 2050X22MM 4 velenų skardos valcavimo staklė
OMCCA HDTS 2050X22MM 4-rollen plaatwalsmachine
Walcarka do blachy 4-walcowa OMCCA HDTS 2050X22MM
Calandra de chapa de 4 rolos OMCCA HDTS 2050X22MM
Mașină de rulat tablă cu 4 role OMCCA HDTS 2050X22MM
OMCCA HDTS 2050X22MM Четырёхвалковая листогибочная машина
Četvorovaljni valjak za savijanje lima OMCCA HDTS 2050X22MM
OMCCA HDTS 2050X22MM 4-vals plåtvalsmaskin
4 toplu silindir büküm makinesi OMCCA HDTS 2050X22MM
EN
- Languages
English (GB)