Contact us to receive an offer.
| Manufacturer | Okuma |
|---|---|
| Model | MX-45 VAE |
| Year | 2001 |
| Location | Germany
|
This Okuma MX-45 VAE vertical machining center, manufactured in 2001, features a worktable measuring 1000 mm in length and 430 mm in width. The machine offers a table longitudinal travel (X-axis) of 762 mm, a cross travel (Y-axis) of 460 mm, and a vertical travel (Z-axis) of 450 mm. The vertical clearance from the spindle to the table ranges from 160 mm to 610 mm, accommodating various workpiece sizes.
The spindle operates at speeds ranging from 50 to 7000 rpm, driven by a 7.5 kW motor. The spindle taper is BT 40 with a spindle bearing diameter of 70 mm. Feed rates for the X, Y, and Z axes range from 1 to 10,000 mm per minute, with rapid traverse speeds up to 36,000 mm per minute for the X and Y axes and up to 30,000 mm per minute for the Z axis.
The machine is equipped with a 20-station tool changer, allowing for efficient tool management. Tool specifications include a maximum diameter of 90 mm with adjacent tools or 125 mm without, a maximum tool length of 250 mm, and a maximum tool weight of 8 kg. The tool change time is approximately 1.5 seconds.
The overall dimensions of the machine are 2200 mm in length, 2380 mm in width, and 2650 mm in height, with an approximate weight of 5500 kg.
Notably, the spindle and spindle drive motor were replaced in 2019, which may contribute to the machine's operational reliability.
The exterior of the machine features white and purple panels with multiple ventilation grilles on the side for cooling. There are signs of dirt and wear on the exterior panels, especially near the bottom and edges, along with some visible rust or staining near the bottom panel. A wooden board is present leaning against the machine on the left side. These observations reflect the machine's used condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Table size: 1.000 x 430 mm
Table loading capacity: n/a kg
Table longitudinal travel: X 762 mm
Ram/Spindle/Table cross travel: Y 460 mm
Ram/spindle vertical travel: Z 450 mm
Vertical clearance spindle to table: 160-610 mm
Feedrates: X/Y/Z 1-10000 mm/min.
Rapids up to: X/Y 36000 mm/min.
Z 30000 mm/min.
Spindle taper: BT 40
Spindle motor rating: 7.5/5.5 KW
Spindle speeds: 50-7000 rpm
Spindle bearing diameter: 70 mm
Tool magazine positions: 20
Tool taper: n/a
Tool diameter with/without adjacent tools: 90 / 125 mm
Tool length: max. 250 mm
Tool weight: max. 8 kg
Tool change time: 1.5 sec
Machine weight: approx. 5500 kg
Machine size: LxWxH 2200 x 2380 x 2650 mm
Equipped with: 20 station tool changer
New spindle and spindle drive motor in 2019 !
Condition: very good
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2004 |
| Offers online | 41 |
| Last activity | Nov. 2, 2026 |
Table size: 1.000 x 430 mm
Table loading capacity: n/a kg
Table longitudinal travel: X 762 mm
Ram/Spindle/Table cross travel: Y 460 mm
Ram/spindle vertical travel: Z 450 mm
Vertical clearance spindle to table: 160-610 mm
Feedrates: X/Y/Z 1-10000 mm/min.
Rapids up to: X/Y 36000 mm/min.
Z 30000 mm/min.
Spindle taper: BT 40
Spindle motor rating: 7.5/5.5 KW
Spindle speeds: 50-7000 rpm
Spindle bearing diameter: 70 mm
Tool magazine positions: 20
Tool taper: n/a
Tool diameter with/without adjacent tools: 90 / 125 mm
Tool length: max. 250 mm
Tool weight: max. 8 kg
Tool change time: 1.5 sec
Machine weight: approx. 5500 kg
Machine size: LxWxH 2200 x 2380 x 2650 mm
Equipped with: 20 station tool changer
New spindle and spindle drive motor in 2019 !
Condition: very good
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Okuma MX-45 VAE vertical machining center, manufactured in 2001, features a worktable measuring 1000 mm in length and 430 mm in width. The machine offers a table longitudinal travel (X-axis) of 762 mm, a cross travel (Y-axis) of 460 mm, and a vertical travel (Z-axis) of 450 mm. The vertical clearance from the spindle to the table ranges from 160 mm to 610 mm, accommodating various workpiece sizes.
The spindle operates at speeds ranging from 50 to 7000 rpm, driven by a 7.5 kW motor. The spindle taper is BT 40 with a spindle bearing diameter of 70 mm. Feed rates for the X, Y, and Z axes range from 1 to 10,000 mm per minute, with rapid traverse speeds up to 36,000 mm per minute for the X and Y axes and up to 30,000 mm per minute for the Z axis.
The machine is equipped with a 20-station tool changer, allowing for efficient tool management. Tool specifications include a maximum diameter of 90 mm with adjacent tools or 125 mm without, a maximum tool length of 250 mm, and a maximum tool weight of 8 kg. The tool change time is approximately 1.5 seconds.
The overall dimensions of the machine are 2200 mm in length, 2380 mm in width, and 2650 mm in height, with an approximate weight of 5500 kg.
Notably, the spindle and spindle drive motor were replaced in 2019, which may contribute to the machine's operational reliability.
The exterior of the machine features white and purple panels with multiple ventilation grilles on the side for cooling. There are signs of dirt and wear on the exterior panels, especially near the bottom and edges, along with some visible rust or staining near the bottom panel. A wooden board is present leaning against the machine on the left side. These observations reflect the machine's used condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2004 |
| Offers online | 41 |
| Last activity | Nov. 2, 2026 |
Вертикален обработващ център Okuma MX-45 VAE
Vertikální obráběcí centrum Okuma MX-45 VAE
Okuma MX-45 VAE Lodret bearbejdningscenter
Okuma MX-45 VAE Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας Okuma MX-45 VAE
Okuma MX-45 VAE Vertical machining center
Centro de mecanizado vertical Okuma MX-45 VAE
Centre d'usinage vertical Okuma MX-45 VAE
Vertikalni obradni centar Okuma MX-45 VAE
Okuma MX-45 VAE Függőleges megmunkáló központ
Centro di lavoro verticale Okuma MX-45 VAE
Vertikalus apdirbimo centras Okuma MX-45 VAE
Okuma MX-45 VAE Verticaal bewerkingscentrum
Pionowe centrum obróbcze Okuma MX-45 VAE
Centro de maquinação vertical Okuma MX-45 VAE
Centru de prelucrare vertical Okuma MX-45 VAE
Okuma MX-45 VAE Вертикальный обрабатывающий центр
Vertikalni obradni centar Okuma MX-45 VAE
Okuma MX-45 VAE Vertikalt bearbetningscenter
Dikey işleme merkezi Okuma MX-45 VAE
EN
- Languages
English (GB)