| Category | Machining centers - vertical |
| Axis X | 560 mm |
| Axis Y | 460 mm |
| Axis Z | 460 mm |
| Rotary table (4th axis) | no |
| Type of CNC | OSP E100M |
| Table length | 1000 mm |
| Table width | 460 mm |
| Max. part weight | 700 kg |
| Number of tool pockets | 32 |
| Spindle taper | BT40 / HSK63 |
| Max. spindle speed | 15000 rpm |
| Spindle motor power | 22 kW |
| Length x width x height | 3000.0 × 3800.0 × 2800.0 |
| Weight | 7000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Okuma MB-46VAE |
| Last availability date | 18/11/2026 |
| Product id | P261118126 |
| Language |
Okuma MB-46VAE vertical machining centre, manufactured in 2003. This 3-axis machine has an OSP-E100M CNC control and a maximum spindle speed of 15,000 rpm. Axis travel is 560 mm in X, 460 mm in Y and 460 mm in Z. The table measures 1,000 x 460 mm and has a stated maximum part weight of 700 kg. The machine is equipped with a 32-pocket tool magazine.
Overall dimensions are 3,000 x 3,800 x 2,800 mm, and the machine weight is 7,000 kg. The enclosed machine has an access door and a work area containing the spindle head, coolant hoses and table/fixture area. A CNC control panel with a display, keypad and push buttons is mounted on the right side.
Included equipment comprises tooling and holders, tool cabinets and tool trolleys. Numerous holders and cutting tools are arranged on storage racks. The machine is used, with visible marks and wear on the enclosure and interior surfaces. Its stated axis travels and table capacity make these key details available for assessing its fit with a prospective machining setup. Please note that condition and equipment should be considered alongside the listed specifications when evaluating the machine for purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis Okuma MB-46VAE vertical machining centre was manufactured in 2003. It features a spindle speed of up to 15,000 rpm, X-, Y- and Z-axis travels of 760 mm, 460 mm and 450 mm, respectively, and a 32-position tool magazine. Included equipment comprises more than 40 tools and holders, three tool cabinets and five tool trolleys. Consider the opportunity to buy this Okuma MB-46VAE vertical machining centre. Contact us for further details.- Machine Type: Vertical CNC Machining Center
- CNC Control System: OSP-E100M (Datasheet notes: OKUMA OSP control, year-dependent)
- Spindle Speed: 15,000 rpm
- Spindle Drive Power: 11 / 7.5 kW
- Number of Axes: 3+1
- Axis Travel X: 560 mm
- Axis Travel Y: 460 mm
- Axis Travel Z: 460 mm
- Rapid Traverse X/Y/Z: up to 40 m/min
- Positioning Accuracy X: 1.7 µm
- Positioning Accuracy Y: 2.4 µm
- Positioning Accuracy Z: 2.2 µm
- Repeatability: up to 1.0 µm
- Tool Changer / Tool Magazine: 32x (Datasheet notes: 20 tools standard; 32 / 48 / 98 tools optional)
- Tool Type: BT40 / HSK-63
- Table Dimensions: 1,000 x 460 mm
- Table Load Capacity: 700 kg
- Power Supply Voltage: 3P x 400V, 50Hz
- Compressed Air Supply: 5 to 7 bar (Recommended operating pressure: 6 bar)
- Weight: 7,000 kg
- Overall Dimensions / Footprint (L x D x H): 3,000 x 3,800 x H2,800 mm
- Included Equipment: 50x tools/holders, Tool Cabinets, Tool Trolleys
Control Brand: OKUMA
Control Model: OSP-E100M
Number of Axes: 3
Spindle Speed: 15000 RPM
X-axis Travel: 560 mm
Y-axis Travel: 460 mm
Z-axis Travel: 460 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2034 |
| Last activity | Nov. 19, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis Okuma MB-46VAE vertical machining centre was manufactured in 2003. It features a spindle speed of up to 15,000 rpm, X-, Y- and Z-axis travels of 760 mm, 460 mm and 450 mm, respectively, and a 32-position tool magazine. Included equipment comprises more than 40 tools and holders, three tool cabinets and five tool trolleys. Consider the opportunity to buy this Okuma MB-46VAE vertical machining centre. Contact us for further details.- Machine Type: Vertical CNC Machining Center
- CNC Control System: OSP-E100M (Datasheet notes: OKUMA OSP control, year-dependent)
- Spindle Speed: 15,000 rpm
- Spindle Drive Power: 11 / 7.5 kW
- Number of Axes: 3+1
- Axis Travel X: 560 mm
- Axis Travel Y: 460 mm
- Axis Travel Z: 460 mm
- Rapid Traverse X/Y/Z: up to 40 m/min
- Positioning Accuracy X: 1.7 µm
- Positioning Accuracy Y: 2.4 µm
- Positioning Accuracy Z: 2.2 µm
- Repeatability: up to 1.0 µm
- Tool Changer / Tool Magazine: 32x (Datasheet notes: 20 tools standard; 32 / 48 / 98 tools optional)
- Tool Type: BT40 / HSK-63
- Table Dimensions: 1,000 x 460 mm
- Table Load Capacity: 700 kg
- Power Supply Voltage: 3P x 400V, 50Hz
- Compressed Air Supply: 5 to 7 bar (Recommended operating pressure: 6 bar)
- Weight: 7,000 kg
- Overall Dimensions / Footprint (L x D x H): 3,000 x 3,800 x H2,800 mm
- Included Equipment: 50x tools/holders, Tool Cabinets, Tool Trolleys
Control Brand: OKUMA
Control Model: OSP-E100M
Number of Axes: 3
Spindle Speed: 15000 RPM
X-axis Travel: 560 mm
Y-axis Travel: 460 mm
Z-axis Travel: 460 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Machining centers - vertical |
| Axis X | 560 mm |
| Axis Y | 460 mm |
| Axis Z | 460 mm |
| Rotary table (4th axis) | no |
| Type of CNC | OSP E100M |
| Table length | 1000 mm |
| Table width | 460 mm |
| Max. part weight | 700 kg |
| Number of tool pockets | 32 |
| Spindle taper | BT40 / HSK63 |
| Max. spindle speed | 15000 rpm |
| Spindle motor power | 22 kW |
| Length x width x height | 3000.0 × 3800.0 × 2800.0 |
| Weight | 7000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Okuma MB-46VAE |
| Last availability date | 18/11/2026 |
| Product id | P261118126 |
| Language |
Okuma MB-46VAE vertical machining centre, manufactured in 2003. This 3-axis machine has an OSP-E100M CNC control and a maximum spindle speed of 15,000 rpm. Axis travel is 560 mm in X, 460 mm in Y and 460 mm in Z. The table measures 1,000 x 460 mm and has a stated maximum part weight of 700 kg. The machine is equipped with a 32-pocket tool magazine.
Overall dimensions are 3,000 x 3,800 x 2,800 mm, and the machine weight is 7,000 kg. The enclosed machine has an access door and a work area containing the spindle head, coolant hoses and table/fixture area. A CNC control panel with a display, keypad and push buttons is mounted on the right side.
Included equipment comprises tooling and holders, tool cabinets and tool trolleys. Numerous holders and cutting tools are arranged on storage racks. The machine is used, with visible marks and wear on the enclosure and interior surfaces. Its stated axis travels and table capacity make these key details available for assessing its fit with a prospective machining setup. Please note that condition and equipment should be considered alongside the listed specifications when evaluating the machine for purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2034 |
| Last activity | Nov. 19, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.