| Manufacturer | NUKON |
|---|---|
| Model | Extreme Large 30250 BEVEL 15KW |
| Year | 2022 |
| Location | Poland
|
Manufacturer: NUKON
Model: Extreme Large 30250 BEVEL
Year manufactured: 2022
Laser type & power: Fiber laser, 15,000 W
Type: Fiber
Maximum material thickness (general): 40 mm
Travel X: 25,100 mm
Travel Y: 3,100 mm
Maximum workpiece weight: 24,750 kg
Machine weight: 55,000 kg
Overview
This NUKON Extreme Large 30250 BEVEL is a large-format fiber laser cutting system intended for heavy plate and structural work. The listing specifies a 15 kW fiber laser source and a BEVEL cutting capability. Controls and drive type are reported as Beckhoff CNC and servo drives, and the machine is identified with nLIGHT/Corona beam shaping technology and a BEVEL cutting head in the listing.
Features and notes
- High-power 15 kW fiber laser suitable for thick-section cutting (general maximum thickness listed as 40 mm).
- BEVEL cutting head is part of the model configuration (for weld-prep beveling operations as indicated in the listing).
- Industrial-scale travels (X: 25,100 mm; Y: 3,100 mm) and a high maximum workpiece weight rating (24,750 kg) for large/heavy plates.
Observed components and workshop items
- Machine is finished in orange and bears a FIBER LASER label.
- Cutting area edge has hazard-yellow/black striping along the work zone.
- Long cutting bed with a dense surface and a stack of metal sheets located at the right side of the bed.
- External ducting and a large silver pipe enter the machine from the left (observation confidence moderate; verify details and condition).
- Overhead yellow crane beams are present above the machine in the workspace and may be relevant for handling/installation.
Condition & purchase advisory
The listing provides technical details and model identification. Specifics such as tooling, actual bevel angle, control/software versions, and current operational status should be confirmed with the seller prior to purchase. Verify the presence, configuration, and condition of any accessories and ducting, and confirm required services for removal and installation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
laser cutting machines
fiber lasers
For Sale: NUKON EXTREME LARGE 30250 BEVEL Fiber Laser Cutting Machine (2022) equipped with a powerful 15 kW nLIGHT Fiber Laser with Corona Beam Shaping Technology and a ±45° BEVEL cutting head. This machine is designed for the efficient processing of large-format plates, heavy steel structures, and thick materials in demanding industrial environments.
Key Features
✅ Working area: 3,000 x 25,000 mm
✅ 15 kW nLIGHT Fiber Laser Source with Corona technology
✅ BEVEL cutting up to ±45° for weld preparation
✅ Beckhoff CNC Control & Servo Drives
✅ Processing of workpieces up to 24,750 kg
✅ Fully operational and currently in production
✅ Inspection and cutting tests possible
✅ Operating hours : 8065h
Technical Specifications
- Manufacturer: NUKON
- Model: Extreme Large 30250 BEVEL
- Year: 2022
- Laser Type: Fiber Laser
- Laser Power: 15,000 W
- Laser Source: nLIGHT with Corona Technology
- Working Area: 3,000 x 25,000 mm
- X Travel: 25,100 mm
- Y Travel: 3,100 mm
- Positioning Accuracy: 0.1 mm
- Maximum Workpiece Weight: 24,750 kg
- Mild Steel: up to 40 mm
- Stainless Steel: up to 30 mm
- Aluminium: up to 30 mm
- Machine Weight: approx. 55,000 kg
Please Note:
The information was obtained to the best of our abilities and - where possible - from the manufacturers.
It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms.
Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken.
We advise you to check any vital details!
Working Area: ['3,000 x 25,000 mm', '3,000 x 25,000 mm']
Manufacturer: NUKON
Model: Extreme Large 30250 BEVEL
Year: 2022
Laser Type: Fiber Laser
Laser Power: 15,000 W
Maximum Workpiece Weight: 24,750 kg
X Travel: 25,100 mm
Y Travel: 3,100 mm
Machine Weight: approx. 55,000 kg
Operating Hours: 8065h
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 24 |
| Last activity | Nov. 8, 2026 |
Fused Machinery, based in Hasselt, Belgium, is a trusted international partner in the purchase, sale, and transfer of high quality pre owned machinery for the metalworking industry. The company has built a strong reputation for its expertise in advanced laser technologies, with a particular focus on fiber and carbon dioxide laser systems.
Fused Machinery offers a carefully curated inventory that includes laser cutting machines, metalworking equipment, plastic processing machinery, automation solutions, and selected woodworking machines. Each machine is thoroughly inspected, tested, and documented to ensure reliability, performance, and full transparency for buyers.
Beyond sourcing premium used machinery, Fused Machinery manages the entire relocation process, including complex logistics and international transfers. With machines available for inspection under power in Europe and a hands on approach to every project, the company combines global reach with a strong local presence, delivering confidence, efficiency, and long term value to its clients.
Whether acquiring high performance equipment or selling industrial assets, Fused Machinery supports businesses at every step with professionalism, precision, and deep technical expertise.
laser cutting machines
fiber lasers
For Sale: NUKON EXTREME LARGE 30250 BEVEL Fiber Laser Cutting Machine (2022) equipped with a powerful 15 kW nLIGHT Fiber Laser with Corona Beam Shaping Technology and a ±45° BEVEL cutting head. This machine is designed for the efficient processing of large-format plates, heavy steel structures, and thick materials in demanding industrial environments.
Key Features
✅ Working area: 3,000 x 25,000 mm
✅ 15 kW nLIGHT Fiber Laser Source with Corona technology
✅ BEVEL cutting up to ±45° for weld preparation
✅ Beckhoff CNC Control & Servo Drives
✅ Processing of workpieces up to 24,750 kg
✅ Fully operational and currently in production
✅ Inspection and cutting tests possible
✅ Operating hours : 8065h
Technical Specifications
- Manufacturer: NUKON
- Model: Extreme Large 30250 BEVEL
- Year: 2022
- Laser Type: Fiber Laser
- Laser Power: 15,000 W
- Laser Source: nLIGHT with Corona Technology
- Working Area: 3,000 x 25,000 mm
- X Travel: 25,100 mm
- Y Travel: 3,100 mm
- Positioning Accuracy: 0.1 mm
- Maximum Workpiece Weight: 24,750 kg
- Mild Steel: up to 40 mm
- Stainless Steel: up to 30 mm
- Aluminium: up to 30 mm
- Machine Weight: approx. 55,000 kg
Please Note:
The information was obtained to the best of our abilities and - where possible - from the manufacturers.
It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms.
Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken.
We advise you to check any vital details!
Working Area: ['3,000 x 25,000 mm', '3,000 x 25,000 mm']
Manufacturer: NUKON
Model: Extreme Large 30250 BEVEL
Year: 2022
Laser Type: Fiber Laser
Laser Power: 15,000 W
Maximum Workpiece Weight: 24,750 kg
X Travel: 25,100 mm
Y Travel: 3,100 mm
Machine Weight: approx. 55,000 kg
Operating Hours: 8065h
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Manufacturer: NUKON
Model: Extreme Large 30250 BEVEL
Year manufactured: 2022
Laser type & power: Fiber laser, 15,000 W
Type: Fiber
Maximum material thickness (general): 40 mm
Travel X: 25,100 mm
Travel Y: 3,100 mm
Maximum workpiece weight: 24,750 kg
Machine weight: 55,000 kg
Overview
This NUKON Extreme Large 30250 BEVEL is a large-format fiber laser cutting system intended for heavy plate and structural work. The listing specifies a 15 kW fiber laser source and a BEVEL cutting capability. Controls and drive type are reported as Beckhoff CNC and servo drives, and the machine is identified with nLIGHT/Corona beam shaping technology and a BEVEL cutting head in the listing.
Features and notes
- High-power 15 kW fiber laser suitable for thick-section cutting (general maximum thickness listed as 40 mm).
- BEVEL cutting head is part of the model configuration (for weld-prep beveling operations as indicated in the listing).
- Industrial-scale travels (X: 25,100 mm; Y: 3,100 mm) and a high maximum workpiece weight rating (24,750 kg) for large/heavy plates.
Observed components and workshop items
- Machine is finished in orange and bears a FIBER LASER label.
- Cutting area edge has hazard-yellow/black striping along the work zone.
- Long cutting bed with a dense surface and a stack of metal sheets located at the right side of the bed.
- External ducting and a large silver pipe enter the machine from the left (observation confidence moderate; verify details and condition).
- Overhead yellow crane beams are present above the machine in the workspace and may be relevant for handling/installation.
Condition & purchase advisory
The listing provides technical details and model identification. Specifics such as tooling, actual bevel angle, control/software versions, and current operational status should be confirmed with the seller prior to purchase. Verify the presence, configuration, and condition of any accessories and ducting, and confirm required services for removal and installation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 24 |
| Last activity | Nov. 8, 2026 |
Fused Machinery, based in Hasselt, Belgium, is a trusted international partner in the purchase, sale, and transfer of high quality pre owned machinery for the metalworking industry. The company has built a strong reputation for its expertise in advanced laser technologies, with a particular focus on fiber and carbon dioxide laser systems.
Fused Machinery offers a carefully curated inventory that includes laser cutting machines, metalworking equipment, plastic processing machinery, automation solutions, and selected woodworking machines. Each machine is thoroughly inspected, tested, and documented to ensure reliability, performance, and full transparency for buyers.
Beyond sourcing premium used machinery, Fused Machinery manages the entire relocation process, including complex logistics and international transfers. With machines available for inspection under power in Europe and a hands on approach to every project, the company combines global reach with a strong local presence, delivering confidence, efficiency, and long term value to its clients.
Whether acquiring high performance equipment or selling industrial assets, Fused Machinery supports businesses at every step with professionalism, precision, and deep technical expertise.
Машина за лазерно рязане NUKON Extreme Large 30250 BEVEL 15KW
Laserový řezací stroj NUKON Extreme Large 30250 BEVEL 15KW
NUKON Extreme Large 30250 BEVEL 15KW Laserskæremaskine
NUKON Extreme Large 30250 BEVEL 15KW Laserschneidmaschine
Μηχανή κοπής λέιζερ NUKON Extreme Large 30250 BEVEL 15KW
NUKON Extreme Large 30250 BEVEL 15KW Laser cutting machine
Máquina de corte láser NUKON Extreme Large 30250 BEVEL 15KW
Machine de découpe laser NUKON Extreme Large 30250 BEVEL 15KW
Stroj za lasersko rezanje NUKON Extreme Large 30250 BEVEL 15KW
NUKON Extreme Large 30250 BEVEL 15KW Lézervágó gép
Macchina taglio laser NUKON Extreme Large 30250 BEVEL 15KW
NUKON Extreme Large 30250 BEVEL 15KW Lazerinio pjovimo staklės
NUKON Extreme Large 30250 BEVEL 15KW Lasersnijmachine
Maszyna do cięcia laserowego NUKON Extreme Large 30250 BEVEL 15KW
Máquina de corte a laser NUKON Extreme Large 30250 BEVEL 15KW
Mașină de tăiere cu laser NUKON Extreme Large 30250 BEVEL 15KW
NUKON Extreme Large 30250 BEVEL 15KW Станок лазерной резки
Mašina za lasersko rezanje NUKON Extreme Large 30250 BEVEL 15KW
NUKON Extreme Large 30250 BEVEL 15KW Laserskärmaskin
Lazer kesim makinesi NUKON Extreme Large 30250 BEVEL 15KW
EN
- Languages
English (GB)