Contact us to receive an offer.
| Manufacturer | MORI SEIKI |
|---|---|
| Model | SV 400 |
| Year | 1998 |
| Location | Germany
|
MORI SEIKI SV 400 vertical machining center, manufactured in 1998. The machine has an X-axis travel of 600 mm and Z-axis travel of 460 mm. The current listing also specifies Y-axis travel of 430 mm. The table measures 900 × 500 mm, with a stated load capacity of 500 kg, and the spindle speed is up to 12,000 rpm. The machine is equipped with an MSD-501 control system and a 30-position BT 40 tool changer.
Additional technical details in the listing include a spindle torque of 166.7 Nm, maximum tool diameter of 80 mm (125 mm with an adjacent pocket empty), maximum tool length of 300 mm and maximum tool weight of 8 kg. Feed rates are listed as 16,000 mm/min and rapid traverse rates as 32,000 mm/min for the X, Y and Z axes. The listing also specifies through-spindle coolant and tool measurement.
The machine has an enclosed work area with front doors, a spindle head, slotted table, coolant hose and front-mounted control panel with display, keypad and emergency-stop button. A circular tool magazine is fitted; some holders and cutting tools are present in magazine positions, while many pockets are empty. Their inclusion in the sale is not specified, so accessories, tools and clamping equipment are included only where confirmed in the additional information.
Visible interior surfaces and the table show staining, grime and signs of use. The seller describes the machine as well maintained and reports low operating hours; inspection under power is available by appointment. Delivery is stated as ex works, not loaded, with timing by agreement. Technical details are subject to change, error and prior sale.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
metalworking machines & machine tools
vertical machining center
Technical details
X-axis travel 600 mm
Y-axis travel 430 mm
Z-axis travel 460 mm
Control system MSD-501
Table clamping surface 900 x 500 mm
T-slots (number x width x spacing) 5 x 18 x 100 mm
Table load capacity 500 kg
Distance from spindle nose to table 150 - 610 mm
Spindle speed 12,000 rpm
Torque 166.7 Nm
Tool holder BT 40
Number of tool stations 30 positions
Max. tool diameter 80 mm
Max. tool diameter with adjacent pocket empty 125 mm
Max. tool length 300 mm
Max. tool weight 8 kg
Feed rate (x / y / z) 16,000 mm/min
Rapid traverse (x / y / z) 32,000 mm/min
Additional information
The machine is from its first owner and has low operating hours.
It is very well maintained and can be inspected under power by appointment.
Technical features & accessories:
- Through-spindle coolant
- Tool measurement
- 30-position BT 40 tool changer
Accessories, tools and clamping equipment shown are included in the scope of delivery only if specified in the additional information.
Subject to changes and errors in the technical data and specifications, as well as prior sale!
Delivery terms: ex works, not loaded
Delivery time: by agreement
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 116 |
| Last activity | Oct. 23, 2026 |
metalworking machines & machine tools
vertical machining center
Technical details
X-axis travel 600 mm
Y-axis travel 430 mm
Z-axis travel 460 mm
Control system MSD-501
Table clamping surface 900 x 500 mm
T-slots (number x width x spacing) 5 x 18 x 100 mm
Table load capacity 500 kg
Distance from spindle nose to table 150 - 610 mm
Spindle speed 12,000 rpm
Torque 166.7 Nm
Tool holder BT 40
Number of tool stations 30 positions
Max. tool diameter 80 mm
Max. tool diameter with adjacent pocket empty 125 mm
Max. tool length 300 mm
Max. tool weight 8 kg
Feed rate (x / y / z) 16,000 mm/min
Rapid traverse (x / y / z) 32,000 mm/min
Additional information
The machine is from its first owner and has low operating hours.
It is very well maintained and can be inspected under power by appointment.
Technical features & accessories:
- Through-spindle coolant
- Tool measurement
- 30-position BT 40 tool changer
Accessories, tools and clamping equipment shown are included in the scope of delivery only if specified in the additional information.
Subject to changes and errors in the technical data and specifications, as well as prior sale!
Delivery terms: ex works, not loaded
Delivery time: by agreement
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
MORI SEIKI SV 400 vertical machining center, manufactured in 1998. The machine has an X-axis travel of 600 mm and Z-axis travel of 460 mm. The current listing also specifies Y-axis travel of 430 mm. The table measures 900 × 500 mm, with a stated load capacity of 500 kg, and the spindle speed is up to 12,000 rpm. The machine is equipped with an MSD-501 control system and a 30-position BT 40 tool changer.
Additional technical details in the listing include a spindle torque of 166.7 Nm, maximum tool diameter of 80 mm (125 mm with an adjacent pocket empty), maximum tool length of 300 mm and maximum tool weight of 8 kg. Feed rates are listed as 16,000 mm/min and rapid traverse rates as 32,000 mm/min for the X, Y and Z axes. The listing also specifies through-spindle coolant and tool measurement.
The machine has an enclosed work area with front doors, a spindle head, slotted table, coolant hose and front-mounted control panel with display, keypad and emergency-stop button. A circular tool magazine is fitted; some holders and cutting tools are present in magazine positions, while many pockets are empty. Their inclusion in the sale is not specified, so accessories, tools and clamping equipment are included only where confirmed in the additional information.
Visible interior surfaces and the table show staining, grime and signs of use. The seller describes the machine as well maintained and reports low operating hours; inspection under power is available by appointment. Delivery is stated as ex works, not loaded, with timing by agreement. Technical details are subject to change, error and prior sale.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 116 |
| Last activity | Oct. 23, 2026 |
Вертикален обработващ център MORI SEIKI SV 400
Vertikální obráběcí centrum MORI SEIKI SV 400
MORI SEIKI SV 400 Lodret bearbejdningscenter
MORI SEIKI SV 400 Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας MORI SEIKI SV 400
MORI SEIKI SV 400 Vertical machining center
Centro de mecanizado vertical MORI SEIKI SV 400
Centre d'usinage vertical MORI SEIKI SV 400
Vertikalni obradni centar MORI SEIKI SV 400
MORI SEIKI SV 400 Függőleges megmunkáló központ
Centro di lavoro verticale MORI SEIKI SV 400
MORI SEIKI SV 400 Vertikalus apdirbimo centras
MORI SEIKI SV 400 Verticaal bewerkingscentrum
Pionowe centrum obróbcze MORI SEIKI SV 400
Centro de usinagem vertical MORI SEIKI SV 400
Centru de prelucrare vertical MORI SEIKI SV 400
MORI SEIKI SV 400 Вертикальный обрабатывающий центр
Vertikalni obradni centar MORI SEIKI SV 400
MORI SEIKI SV 400 Vertikalt bearbetningscenter
Dikey işleme merkezi MORI SEIKI SV 400
EN
- Languages
English (GB)