| Manufacturer | Monforts |
|---|---|
| Model | DNC 3 |
| Year | 2000 |
| Location | Germany
|
| Category | Lathes - CNC lathes |
| Turning length | mm |
| Turning Ø | 150 mm |
| Ø above the bed | mm |
| Ø above transversing slide | mm |
| Length between centers | mm |
| Type of CNC | |
| X-axis | 170 mm |
| Z-axis | 445 mm |
| Max workpiece weight | kg |
| Spindle taper | |
| Spindle bore | 65 mm |
| Number of turrets | |
| Number of tools on turret | |
| Number of rotating tools | |
| Turning speed | 5000 rpm |
| Spindle motor power | 25 kW |
| Tailstock | no |
| Bar feeder | no |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Monforts DNC 3 |
| Last availability date | 16/09/2026 |
| Product id | P260916234 |
| Language |
CNC струг Monforts DNC 3
CNC soustruh Monforts DNC 3
Monforts DNC 3 CNC-drejebænk
Monforts DNC 3 CNC-Drehmaschine
Τόρνος CNC Monforts DNC 3
Monforts DNC 3 CNC lathe
Torno CNC Monforts DNC 3
Tour CNC Monforts DNC 3
CNC tokarski stroj Monforts DNC 3
Monforts DNC 3 CNC esztergagép
Tornio CNC Monforts DNC 3
Monforts DNC 3 CNC tekinimo staklės
Monforts DNC 3 CNC-draaibank
Tokarka CNC Monforts DNC 3
Torno CNC Monforts DNC 3
Strung CNC Monforts DNC 3
Monforts DNC 3 Токарный станок с ЧПУ
CNC strug Monforts DNC 3
Monforts DNC 3 CNC-svarv
CNC torna Monforts DNC 3
|
Monforts DNC 3 (year 2000) CNC lathe with Siemens 840D Powerline control. This unit is configured for versatile turning work with main and counter spindles and dual revolver tool carriers. Key machine data and features:
- Manufacturer / model: Monforts DNC 3
- Year manufactured: 2000
- Control: Siemens 840D - Powerline
- Maximum turning diameter: 150 mm
- Spindle bore (bar feed/pass-through): 65 mm
- Main spindle speed: 5,000 rpm
- Main spindle motor power (max): 25 kW
- Counter spindle: same speed and power ratings stated (5,000 rpm / 25 kW)
Tooling and axes:
- Two revolver tool carriers (Werkzeugträger I and II)
- Each revolver: 12 tool positions, VDI 30 tool holding
- Tool drive on turret I: up to 4,500 rpm
- X / Z axis travel (both turrets): X = 170 mm, Z = 445 mm
- Rapid traverse (X / Z): 24 / 30 m/min
Accessories and equipment listed:
- Chip conveyor
- Coolant system: coolant pump (KSS-Pumpe)
- Interface for bar feeder (Rohmaterialzufuhr / Schnittstelle Stangenlader)
Notes and exclusions:
- Clamping fixtures, chucks, and cutting tools shown in photos are not included in the offer (as stated).
- No statement is made about machine condition, testing, refurbishment, or warranty; prospective buyers should request inspection or testing details from the seller.
If you need a formatted specification sheet or a concise summary for listing purposes, this description can be adapted accordingly.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Monforts DNC 3Baujahr : 2000 Steuerung : Siemens 840D - Powerline Drehdurchm. : 150 mm____________Beschreibung:Hauptspindel:Drehzahl:5.000 U/minLeistung (max.):25 kWDrehmoment (max.):263 NmStangendurchlass:65 mmGegenspindel:Drehzahl:5.000 U/minLeistung (max.):25 kWDrehmoment (max.):263 NmWerkzeugträger I (X/Z):Technologie:Revolver mit 12 StationenWerkzeugaufnahme:VDI 30Werkzeugantrieb:4.500 U/minVerfahrweg in X/Z:170/445 mmEilgang in X/Z:24/30 m/minWerkzeugträger II (X/Z):Technologie:Revolver mit 12 StationenWerkzeugaufnahme:VDI 30Werkzeugantrieb::Verfahrweg in X/Z:170/445 mmEilgang in X/Z:24/30 m/minAusstattung/Zubehör:Spänemanagement:SpänefördererKühlmittelmanagement:KSS-PumpeRohmaterialzufuhr:Schnittstelle Stangenlader:Achtung:Abgebildete Spannmittel und Werkzeuge sind NICHT Bestandteil des Angebots!
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 41 |
| Last activity | Nov. 5, 2026 |
Gläsener+Schmidt GmbH is a leading manufacturer based in Germany, specializing in high-quality machine tools and precision engineering solutions. With decades of experience in the industry, the company has established itself as a trusted partner for businesses seeking innovative and reliable machinery. Their commitment to excellence is evident in every product they offer, ensuring that clients receive the best tools to enhance their manufacturing processes. At Gläsener+Schmidt, the focus is on delivering cutting-edge technology that meets the evolving needs of various sectors, including automotive, aerospace, and general manufacturing. The company prides itself on its state-of-the-art production facilities and a dedicated team of engineers who work tirelessly to develop solutions that optimize efficiency and productivity. Their extensive range of products includes CNC machines, milling machines, and specialized tooling, all designed to provide superior performance and durability. Customer satisfaction is at the heart of Gläsener+Schmidt's operations. They offer tailored solutions and exceptional after-sales support, ensuring that clients can maximize the potential of their investments. By choosing Gläsener+Schmidt GmbH, businesses not only gain access to top-tier machinery but also a partnership that prioritizes innovation, quality, and service excellence. Experience the difference with Gläsener+Schmidt, where precision meets performance.
Monforts DNC 3Baujahr : 2000 Steuerung : Siemens 840D - Powerline Drehdurchm. : 150 mm____________Beschreibung:Hauptspindel:Drehzahl:5.000 U/minLeistung (max.):25 kWDrehmoment (max.):263 NmStangendurchlass:65 mmGegenspindel:Drehzahl:5.000 U/minLeistung (max.):25 kWDrehmoment (max.):263 NmWerkzeugträger I (X/Z):Technologie:Revolver mit 12 StationenWerkzeugaufnahme:VDI 30Werkzeugantrieb:4.500 U/minVerfahrweg in X/Z:170/445 mmEilgang in X/Z:24/30 m/minWerkzeugträger II (X/Z):Technologie:Revolver mit 12 StationenWerkzeugaufnahme:VDI 30Werkzeugantrieb::Verfahrweg in X/Z:170/445 mmEilgang in X/Z:24/30 m/minAusstattung/Zubehör:Spänemanagement:SpänefördererKühlmittelmanagement:KSS-PumpeRohmaterialzufuhr:Schnittstelle Stangenlader:Achtung:Abgebildete Spannmittel und Werkzeuge sind NICHT Bestandteil des Angebots!
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Lathes - CNC lathes |
| Turning length | mm |
| Turning Ø | 150 mm |
| Ø above the bed | mm |
| Ø above transversing slide | mm |
| Length between centers | mm |
| Type of CNC | |
| X-axis | 170 mm |
| Z-axis | 445 mm |
| Max workpiece weight | kg |
| Spindle taper | |
| Spindle bore | 65 mm |
| Number of turrets | |
| Number of tools on turret | |
| Number of rotating tools | |
| Turning speed | 5000 rpm |
| Spindle motor power | 25 kW |
| Tailstock | no |
| Bar feeder | no |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Monforts DNC 3 |
| Last availability date | 16/09/2026 |
| Product id | P260916234 |
| Language |
CNC струг Monforts DNC 3
CNC soustruh Monforts DNC 3
Monforts DNC 3 CNC-drejebænk
Monforts DNC 3 CNC-Drehmaschine
Τόρνος CNC Monforts DNC 3
Monforts DNC 3 CNC lathe
Torno CNC Monforts DNC 3
Tour CNC Monforts DNC 3
CNC tokarski stroj Monforts DNC 3
Monforts DNC 3 CNC esztergagép
Tornio CNC Monforts DNC 3
Monforts DNC 3 CNC tekinimo staklės
Monforts DNC 3 CNC-draaibank
Tokarka CNC Monforts DNC 3
Torno CNC Monforts DNC 3
Strung CNC Monforts DNC 3
Monforts DNC 3 Токарный станок с ЧПУ
CNC strug Monforts DNC 3
Monforts DNC 3 CNC-svarv
CNC torna Monforts DNC 3
|
Monforts DNC 3 (year 2000) CNC lathe with Siemens 840D Powerline control. This unit is configured for versatile turning work with main and counter spindles and dual revolver tool carriers. Key machine data and features:
- Manufacturer / model: Monforts DNC 3
- Year manufactured: 2000
- Control: Siemens 840D - Powerline
- Maximum turning diameter: 150 mm
- Spindle bore (bar feed/pass-through): 65 mm
- Main spindle speed: 5,000 rpm
- Main spindle motor power (max): 25 kW
- Counter spindle: same speed and power ratings stated (5,000 rpm / 25 kW)
Tooling and axes:
- Two revolver tool carriers (Werkzeugträger I and II)
- Each revolver: 12 tool positions, VDI 30 tool holding
- Tool drive on turret I: up to 4,500 rpm
- X / Z axis travel (both turrets): X = 170 mm, Z = 445 mm
- Rapid traverse (X / Z): 24 / 30 m/min
Accessories and equipment listed:
- Chip conveyor
- Coolant system: coolant pump (KSS-Pumpe)
- Interface for bar feeder (Rohmaterialzufuhr / Schnittstelle Stangenlader)
Notes and exclusions:
- Clamping fixtures, chucks, and cutting tools shown in photos are not included in the offer (as stated).
- No statement is made about machine condition, testing, refurbishment, or warranty; prospective buyers should request inspection or testing details from the seller.
If you need a formatted specification sheet or a concise summary for listing purposes, this description can be adapted accordingly.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 41 |
| Last activity | Nov. 5, 2026 |
Gläsener+Schmidt GmbH is a leading manufacturer based in Germany, specializing in high-quality machine tools and precision engineering solutions. With decades of experience in the industry, the company has established itself as a trusted partner for businesses seeking innovative and reliable machinery. Their commitment to excellence is evident in every product they offer, ensuring that clients receive the best tools to enhance their manufacturing processes. At Gläsener+Schmidt, the focus is on delivering cutting-edge technology that meets the evolving needs of various sectors, including automotive, aerospace, and general manufacturing. The company prides itself on its state-of-the-art production facilities and a dedicated team of engineers who work tirelessly to develop solutions that optimize efficiency and productivity. Their extensive range of products includes CNC machines, milling machines, and specialized tooling, all designed to provide superior performance and durability. Customer satisfaction is at the heart of Gläsener+Schmidt's operations. They offer tailored solutions and exceptional after-sales support, ensuring that clients can maximize the potential of their investments. By choosing Gläsener+Schmidt GmbH, businesses not only gain access to top-tier machinery but also a partnership that prioritizes innovation, quality, and service excellence. Experience the difference with Gläsener+Schmidt, where precision meets performance.
EN
- Languages
English (GB)