Contact us to receive an offer.
| Manufacturer | Mitsubishi |
|---|---|
| Model | 650 MMG 110 |
| Year | 2003 |
| Location | Turkey
|
This Mitsubishi 650 MMG 110 injection molding machine, manufactured in 2003, offers a clamping force of 650 tons, suitable for a range of heavy-duty molding applications. The machine features a screw diameter of 90 mm with a shot volume of 3140 cm³, providing substantial material injection capacity. The screw has a length-to-diameter (L/D) ratio of 19, and a stroke of 1350 mm, enabling effective plasticizing and injection performance.
The platen measures 1400 mm by 1400 mm, with tie bar spacing of 950 mm both horizontally and vertically, allowing for a robust mold installation area. The daylight opening is 1800 mm, providing ample space for mold changes and larger mold setups.
This fully hydraulic machine incorporates protective mesh guarding around moving parts, enhancing operator safety during operation. Visible hydraulic and pneumatic hoses and connections are integrated into the system, along with multiple valves and control units housed within the guarded area, indicating a complex and well-equipped hydraulic control setup.
The machine's side view reveals a hopper and barrel assembly, with hydraulic cylinders and piping located beneath the barrel to facilitate injection and clamping functions. An electronic control panel is mounted on a stand to the left side, allowing for operational control and monitoring.
The machine shows signs of use, including some wear, dirt, and paint chipping on the base and frame, consistent with typical industrial operation. Despite this, the machine appears structurally sound and is a reliable option for injection molding needs where a high clamping force and large shot volume are required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
650 Ton
L/D: 19
Screw diameter : 90 mm
Screw volume(cm3) : 3140
Stroke : 1350 mm
Distance between columns : 950 mm x 950 mm
DayLight : 1800 mm
Plate size : 1400 mm x 1400 mm
All maintenance has been done regularly
Only original raw material used on the machine
Fully hydraulic
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2022 |
| Offers online | 1 |
| Last activity | Jan. 18, 2024 |
650 Ton
L/D: 19
Screw diameter : 90 mm
Screw volume(cm3) : 3140
Stroke : 1350 mm
Distance between columns : 950 mm x 950 mm
DayLight : 1800 mm
Plate size : 1400 mm x 1400 mm
All maintenance has been done regularly
Only original raw material used on the machine
Fully hydraulic
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Mitsubishi 650 MMG 110 injection molding machine, manufactured in 2003, offers a clamping force of 650 tons, suitable for a range of heavy-duty molding applications. The machine features a screw diameter of 90 mm with a shot volume of 3140 cm³, providing substantial material injection capacity. The screw has a length-to-diameter (L/D) ratio of 19, and a stroke of 1350 mm, enabling effective plasticizing and injection performance.
The platen measures 1400 mm by 1400 mm, with tie bar spacing of 950 mm both horizontally and vertically, allowing for a robust mold installation area. The daylight opening is 1800 mm, providing ample space for mold changes and larger mold setups.
This fully hydraulic machine incorporates protective mesh guarding around moving parts, enhancing operator safety during operation. Visible hydraulic and pneumatic hoses and connections are integrated into the system, along with multiple valves and control units housed within the guarded area, indicating a complex and well-equipped hydraulic control setup.
The machine's side view reveals a hopper and barrel assembly, with hydraulic cylinders and piping located beneath the barrel to facilitate injection and clamping functions. An electronic control panel is mounted on a stand to the left side, allowing for operational control and monitoring.
The machine shows signs of use, including some wear, dirt, and paint chipping on the base and frame, consistent with typical industrial operation. Despite this, the machine appears structurally sound and is a reliable option for injection molding needs where a high clamping force and large shot volume are required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2022 |
| Offers online | 1 |
| Last activity | Jan. 18, 2024 |
Mitsubishi 650 MMG 110
Vstřikolis Mitsubishi 650 MMG 110
Mitsubishi 650 MMG 110
Mitsubishi 650 MMG 110 Spritzgießmaschine
Mitsubishi 650 MMG 110
Mitsubishi 650 Ton Plastic Injection Moulding Machine
Inyectora de plástico Mitsubishi 650 MMG 110
Presse à injecter Mitsubishi 650 MMG 110
Mitsubishi 650 MMG 110
Mitsubishi 650 MMG 110
Pressa ad iniezione Mitsubishi 650 MMG 110
Mitsubishi 650 MMG 110
Mitsubishi 650 MMG 110
Wtryskarka Mitsubishi 650 MMG 110
Mitsubishi 650 MMG 110
Mitsubishi 650 MMG 110
Mitsubishi 650 MMG 110 Термопластавтомат
Mitsubishi 650 MMG 110
Mitsubishi 650 MMG 110
Enjeksiyon kalıplama makinesi Mitsubishi 650 MMG 110
EN
- Languages
English (GB)