Trustpilot
Categories
Start selling
0

Favorites

Account

Log In
Create an account
Trustpilot
0
Log In
Create an account

MEBUSA PH 40/20 Press brake

MEBUSA PH 40/20 P261020183
MEBUSA PH 40/20 P261020183
MEBUSA PH 40/20 P261020183
MEBUSA PH 40/20 P261020183
MEBUSA PH 40/20 P261020183
MEBUSA PH 40/20 P261020183
MEBUSA PH 40/20 P261020183
MEBUSA PH 40/20 P261020183

2,000 €

Make an offer
  • - Secured payment for the purchase
  • - Dedicated compliance check of the seller
  • - Logistics and customs support if applicable
  • - After-sale follow up if needed

Contact us to receive an offer.

Manufacturer MEBUSA
Model PH 40/20
Year 1993
Location Spain ES
Raphael
Your dedicated contact
Raphael M.

Specifications

Category Bending - Press brakes
worked hours
hours under power
state as-is, where-is
At local norms None
status visible
Datasheet Mebusa PH 40/20
Last availability date 20/10/2026
Product id P261020183
Language
bg Абкант преса MEBUSA PH 40/20
cs Ohraňovací lis MEBUSA PH 40/20
da MEBUSA PH 40/20 Kantpresse
de MEBUSA PH 40/20 Abkantpresse
el Στραντζόπρεσα MEBUSA PH 40/20
en MEBUSA PH 40/20 Press brake
es Prensa plegadora MEBUSA PH 40/20
fr Presse plieuse MEBUSA PH 40/20
hr Abkant preša MEBUSA PH 40/20
hu MEBUSA PH 40/20 Él-hajlító prés
it Piegatrice MEBUSA PH 40/20
lt MEBUSA PH 40/20 Lenkimo presas
nl MEBUSA PH 40/20 Kantpers
pl Prasa krawędziowa MEBUSA PH 40/20
pt Prensa dobradeira MEBUSA PH 40/20
ro Presă abkant MEBUSA PH 40/20
ru MEBUSA PH 40/20 Листогибочный пресс
sr Abkant presa MEBUSA PH 40/20
sv MEBUSA PH 40/20 Kantpress
tr Abkant pres MEBUSA PH 40/20

Automatic description (AI-Generated)

MEBUSA PH 40/20 Sheet Metal Bending Machine

Manufacturer: MEBUSA
Model: PH 40/20
Year of manufacture: 1993
Application: Free-air bending

This press brake is offered with punch and die tooling installed. A row of tooling and clamping components is present across the front working area. The visible tooling is included, pending inventory and measurement.

Perforated metal safety guards are fitted on both sides of the work area. The right-side guard is shown swung open. A small control panel is mounted near the right side of the machine, and a cable hangs down across the front. The machine has a separate electrical cabinet.

Electrical information listed for the machine: 380 V, 50 Hz power supply and 110 V, 50 Hz control voltage. The wiring diagram reference is B-4017-434. An open-die bending chart is documented as being on the machine.

The exterior shows surface wear, marks and dirt. The machine is sold as-is and where-is; no claim is made here about its operational condition.

This listing describes a MEBUSA PH 40/20 intended for free-air sheet-metal bending, with the installed punch and die tooling and the listed guards, control panel and separate electrical cabinet. Tooling inventory and measurements remain pending, so the included tooling details should be treated as subject to that review. The electrical values and diagram reference are provided as listed information, not as a statement about testing or current functionality.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

Seller's description

MEBUSA PH 40/20 Sheet Metal Bending Machine

Manufacturer: MEBUSA
Model: PH 40/20
Year of manufacture: 1993
Application: Free-air bending
Tooling: Punch and die installed; visible tooling included, pending inventory and measurement
Guards: Metal mesh side guards
Electrical cabinet: Separate
Power supply: 380 V, 50 Hz
Control voltage: 110 V, 50 Hz
Wiring diagram: B-4017-434
Documentation on machine: Open-die bending chart
Condition: Sold as-is and where-is
Dimensions listed: 33.0 × 15.0 × 8.0 mm

Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.


Client type Factory – small or medium company
Active since 2026
Offers online 2
Last activity Oct. 23, 2026

Seller's description

MEBUSA PH 40/20 Sheet Metal Bending Machine

Manufacturer: MEBUSA
Model: PH 40/20
Year of manufacture: 1993
Application: Free-air bending
Tooling: Punch and die installed; visible tooling included, pending inventory and measurement
Guards: Metal mesh side guards
Electrical cabinet: Separate
Power supply: 380 V, 50 Hz
Control voltage: 110 V, 50 Hz
Wiring diagram: B-4017-434
Documentation on machine: Open-die bending chart
Condition: Sold as-is and where-is
Dimensions listed: 33.0 × 15.0 × 8.0 mm

Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.

Specifications

Category Bending - Press brakes
worked hours
hours under power
state as-is, where-is
At local norms None
status visible
Datasheet Mebusa PH 40/20
Last availability date 20/10/2026
Product id P261020183
Language
bg Абкант преса MEBUSA PH 40/20
cs Ohraňovací lis MEBUSA PH 40/20
da MEBUSA PH 40/20 Kantpresse
de MEBUSA PH 40/20 Abkantpresse
el Στραντζόπρεσα MEBUSA PH 40/20
en MEBUSA PH 40/20 Press brake
es Prensa plegadora MEBUSA PH 40/20
fr Presse plieuse MEBUSA PH 40/20
hr Abkant preša MEBUSA PH 40/20
hu MEBUSA PH 40/20 Él-hajlító prés
it Piegatrice MEBUSA PH 40/20
lt MEBUSA PH 40/20 Lenkimo presas
nl MEBUSA PH 40/20 Kantpers
pl Prasa krawędziowa MEBUSA PH 40/20
pt Prensa dobradeira MEBUSA PH 40/20
ro Presă abkant MEBUSA PH 40/20
ru MEBUSA PH 40/20 Листогибочный пресс
sr Abkant presa MEBUSA PH 40/20
sv MEBUSA PH 40/20 Kantpress
tr Abkant pres MEBUSA PH 40/20

Automatic description (AI-Generated)

MEBUSA PH 40/20 Sheet Metal Bending Machine

Manufacturer: MEBUSA
Model: PH 40/20
Year of manufacture: 1993
Application: Free-air bending

This press brake is offered with punch and die tooling installed. A row of tooling and clamping components is present across the front working area. The visible tooling is included, pending inventory and measurement.

Perforated metal safety guards are fitted on both sides of the work area. The right-side guard is shown swung open. A small control panel is mounted near the right side of the machine, and a cable hangs down across the front. The machine has a separate electrical cabinet.

Electrical information listed for the machine: 380 V, 50 Hz power supply and 110 V, 50 Hz control voltage. The wiring diagram reference is B-4017-434. An open-die bending chart is documented as being on the machine.

The exterior shows surface wear, marks and dirt. The machine is sold as-is and where-is; no claim is made here about its operational condition.

This listing describes a MEBUSA PH 40/20 intended for free-air sheet-metal bending, with the installed punch and die tooling and the listed guards, control panel and separate electrical cabinet. Tooling inventory and measurements remain pending, so the included tooling details should be treated as subject to that review. The electrical values and diagram reference are provided as listed information, not as a statement about testing or current functionality.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

About this seller

Client type Factory – small or medium company
Active since 2026
Offers online 2
Last activity Oct. 23, 2026

Here is a selection of similar machines - MEBUSA PH 40/20

Used Electric Press Brakes for Sale

Electric press brakes offer faster cycling, lower energy consumption, and quieter operation than hydraulic equivalents. They are increasingly sought after on the used market as shops prioritize efficiency. Browse available electric and servo-electric press brakes on Exapro by tonnage, bending length, and brand.

MEBUSA PH 40/20 Press brake