Contact us to receive an offer.
| Manufacturer | MAZAK |
|---|---|
| Model | HCN 6000 |
| Year | 2011 |
| Location | Italy
|
Manufacturer: MAZAK
Model: HCN 6000
Year manufactured: 2011
Type: Horizontal machining center
Control: MAZATROL MATRIX 2
Overview:
This listing describes a MAZAK HCN 6000 horizontal machining center equipped with a MAZATROL MATRIX 2 control. The machine is configured as a horizontal machining center and includes an automatic tool change magazine and a table surface with threaded holes for workpiece fixturing. The automatic tool changer uses a fixed selection method (as noted in the listing). A pressurized coolant system is indicated in the listing information.
Visible components and condition notes (to be verified by inspection):
- Exterior enclosure panels are present and appear intact. The machine uses light-colored (white) enclosure panels.
- Hazard/warning labels are present on the enclosure.
- An electrical compartment/panel is open and wiring/components are visible; this should be inspected for completeness and safety prior to purchase.
- A cable or power cord is hanging loosely toward the floor and should be checked and secured as needed.
Important verification recommendations:
Prospective buyers should verify spindle and tool changer specifications, machine travel limits, spindle attachment, tool magazine capacity, coolant performance, machine geometry, and operational status through a physical inspection or documented test (not provided here). Confirm completeness of electrical enclosures and safe wiring, and confirm any tooling, fixtures, or ancillary equipment included with the machine.
Note: Condition notes above are based on listing observations and should be confirmed during an on-site inspection or by requesting additional information from the seller.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
horizontal machining centers
Control Unit: MAZATROL MATRIX 2
X Axis Travel: 800
Y Axis Travel: 800
Z Axis Travel: 800
Table Length: 500
Table Width: 500
Max Workpiece Dimensions Length X Width X Height Table: D.900XH.1000
Spindle Table Surface: threaded holes
Max Workpiece Weight Spindle: 1000
Spindle: 7000
Spindle Attachment: ISO 50
Continuous Torque 10 Min Spindle: 680 Nm
Rapid Traverse X Axis: 60000
Rapid Traverse Y Axis: 60000
Rapid Traverse Z Axis: 60000
Number of Tools ATC Magazine: 60
Max Tool Diameter ATC Magazine: 250
Max Tool Length From Reference Line ATC Magazine: 500
Tool Selection Method ATC Magazine: Fixed
Max Tool Weight ATC Magazine: 30 Kg
Tool Change Time ATC Magazine: 5 SEC.
Coolant Pressure: 50 BAR
Machine Height Dimensions: 3350
Machine Width Dimensions: 2820
Machine Depth Dimensions: 6755
Machine Weight Dimensions: 14700
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 33 |
| Last activity | Oct. 30, 2026 |
horizontal machining centers
Control Unit: MAZATROL MATRIX 2
X Axis Travel: 800
Y Axis Travel: 800
Z Axis Travel: 800
Table Length: 500
Table Width: 500
Max Workpiece Dimensions Length X Width X Height Table: D.900XH.1000
Spindle Table Surface: threaded holes
Max Workpiece Weight Spindle: 1000
Spindle: 7000
Spindle Attachment: ISO 50
Continuous Torque 10 Min Spindle: 680 Nm
Rapid Traverse X Axis: 60000
Rapid Traverse Y Axis: 60000
Rapid Traverse Z Axis: 60000
Number of Tools ATC Magazine: 60
Max Tool Diameter ATC Magazine: 250
Max Tool Length From Reference Line ATC Magazine: 500
Tool Selection Method ATC Magazine: Fixed
Max Tool Weight ATC Magazine: 30 Kg
Tool Change Time ATC Magazine: 5 SEC.
Coolant Pressure: 50 BAR
Machine Height Dimensions: 3350
Machine Width Dimensions: 2820
Machine Depth Dimensions: 6755
Machine Weight Dimensions: 14700
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Manufacturer: MAZAK
Model: HCN 6000
Year manufactured: 2011
Type: Horizontal machining center
Control: MAZATROL MATRIX 2
Overview:
This listing describes a MAZAK HCN 6000 horizontal machining center equipped with a MAZATROL MATRIX 2 control. The machine is configured as a horizontal machining center and includes an automatic tool change magazine and a table surface with threaded holes for workpiece fixturing. The automatic tool changer uses a fixed selection method (as noted in the listing). A pressurized coolant system is indicated in the listing information.
Visible components and condition notes (to be verified by inspection):
- Exterior enclosure panels are present and appear intact. The machine uses light-colored (white) enclosure panels.
- Hazard/warning labels are present on the enclosure.
- An electrical compartment/panel is open and wiring/components are visible; this should be inspected for completeness and safety prior to purchase.
- A cable or power cord is hanging loosely toward the floor and should be checked and secured as needed.
Important verification recommendations:
Prospective buyers should verify spindle and tool changer specifications, machine travel limits, spindle attachment, tool magazine capacity, coolant performance, machine geometry, and operational status through a physical inspection or documented test (not provided here). Confirm completeness of electrical enclosures and safe wiring, and confirm any tooling, fixtures, or ancillary equipment included with the machine.
Note: Condition notes above are based on listing observations and should be confirmed during an on-site inspection or by requesting additional information from the seller.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 33 |
| Last activity | Oct. 30, 2026 |
ХОРИЗОНТАЛЕН РАБОТЕН ЦЕНТЪР MAZAK МОД. HCN-6000
HORIZONTÁLNÍ PRACOVIŠTĚ MAZAK MOD. HCN-6000
HORIZONTALT ARBEJDSCENTER MAZAK MOD. HCN-6000
HORIZONTAL-BEARBEITUNGSZENTRUM MAZAK MOD. HCN-6000
ΟΡΙΖΟΝΤΙΑ ΚΕΝΤΡΟ ΕΡΓΑΣΙΑΣ MAZAK MOD. HCN-6000
MAZAK HORIZONTAL MACHINING CENTER MOD. HCN-6000
CENTRO DE TRABAJO HORIZONTAL MAZAK MOD. HCN-6000
CENTRE D'USINAGE HORIZONTAL MAZAK MOD. HCN-6000
HORIZONTALNI RADNI CENTAR MAZAK MOD. HCN-6000
MAZAK HCN-6000 TÍPUSÚ VÍZSZINTES MEGMUNKÁLÓ KÖZPONT
CENTRO DI LAVORO ORIZZONTALE MAZAK MOD. HCN-6000
HORIZONTALUS DARBO CENTRAS MAZAK MOD. HCN-6000
HORIZONTALE BEWERKINGSCENTRUM MAZAK MOD. HCN-6000
POZIOME CENTRUM OBRÓBCZE MAZAK MOD. HCN-6000
CENTRO DE TRABALHO HORIZONTAL MAZAK MOD. HCN-6000
CENTRU DE LUCRU ORIZONTAL MAZAK MOD. HCN-6000
ГОРИЗОНТАЛЬНЫЙ ОБРАБОТАВЫЮЩИЙ ЦЕНТР MAZAK МОД. HCN-6000
ХОРИЗОНТАЛНИ РАДНИ ЦЕНТАР MAZAK МОД. HCN-6000
HORIZONTALT ARBETSCENTER MAZAK MOD. HCN-6000
MAZAK MOD. HCN-6000 YATAY İŞLEM MERKEZİ
EN
- Languages
English (GB)