Contact us to receive an offer.
| Manufacturer | MATSUURA |
|---|---|
| Model | FX-10 |
| Year | 1997 |
| Location | Sweden
|
## MATSUURA FX-10 Vertical Machining Center
The MATSUURA FX-10 is a vertical machining center manufactured in 1997. It has X-, Y- and Z-axis travels of 2,000 mm, 1,500 mm and 400 mm respectively. The table measures 2,150 × 1,100 mm and has a maximum part-load capacity of 1,000 kg.
The machine is equipped with a spindle rated for speeds up to 27,000 rpm and a spindle motor power of 20.3 kW. The spindle speed range, as stated in the supplied technical details, is 600–27,000 rpm. A 40-position tool magazine is specified. Additional listed tool-changer details include a maximum tool length of 300 mm, maximum tool weight of 10 kg and tool-to-tool change time of 2.5 seconds. The listed spindle taper is No. 40 / JIS #40.
### Main specifications
- Manufacturer: Matsuura
- Model: FX-10
- Year of manufacture: 1997
- Machine type: Vertical machining center
- X-axis travel: 2,000 mm
- Y-axis travel: 1,500 mm
- Z-axis travel: 400 mm
- Table size: 2,150 × 1,100 mm
- Maximum part weight: 1,000 kg
- Maximum spindle speed: 27,000 rpm
- Spindle motor power: 20.3 kW
- Tool pockets: 40
The machine has an enclosed green housing with tall doors and gridded viewing windows. The spindle, machining area, control panel, separate blue cabinet and mounted hand control are present. Coolant hoses and fittings are positioned near the spindle, and a rack holding multiple tool holders is also present.
The exterior, control panel and interior surfaces show signs of use, including scuffs, grime, staining and areas of worn or chipped paint. Loose cables and wires are visible across the exterior and top of the enclosure. Operational condition is not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
MATSUURA FX-10
High-Speed Vertical Machining Center
This Matsuura FX-10 (J300) is a high-speed vertical machining center engineered for rapid, precision 3-axis milling. It features a spacious 2,150 × 1,100 mm table with a 1,000 kg load capacity and substantial X and Y travels of 2,000 mm and 1,500 mm. Equipped with an ultra-fast 27,000 rpm spindle capable of 20.3 kW continuous power and a 40-position automatic tool changer (ATC), this machine is optimized for highly efficient, high-speed manufacturing operations.
Technical Details
Manufacturer: Matsuura
Model / Type: FX-10 / J300
Year of Manufacture: 1997
Machine Type: High-Speed Vertical Machining Center
X-Axis Travel: 2,000 mm
Y-Axis Travel: 1,500 mm
Z-Axis Travel: 400 mm
Distance Table Surface – Spindle Nose: 150–550 mm
Distance Spindle Center – Column Guide: 210 mm
Horizontal Clearance Between Columns: 1,400 mm
Table Size: 2,150 × 1,100 mm
Max. Table Load: 1,000 kg
T-Slots: 22 mm × 7 × 165 mm
Spindle Speed Range: 600–27,000 rpm
Spindle Taper: No. 40 / JIS #40
Spindle Bearing Diameter: 60 mm
Spindle Motor Power – 300–6,000 rpm: 5.5 / 7.5 kW rated / max.
Spindle Motor Power – 6,001–27,000 rpm: 20.3 kW continuous
Max. Spindle Torque: 46 Nm at 4,700 rpm
Spindle Brake: Standard
Automatic Spindle Orientation: Standard
Rapid Traverse X/Y/Z: 25,000 mm/min
Working Feed X/Y/Z : 1–10,000 mm/min
Manual Continuous Feed: 1–15,000 mm/min
Manual Feed: 0–4,000 mm/min
Drive Motors
X-Axis Servo Motor: 4.0 kW
Y-Axis Servo Motor: 4.4 kW
Z-Axis Servo Motor with Brake: 2.9 kW
Coolant Pump: 0.33 / 0.52 kW
Central Lubrication Pump: 0.1 kW
Spindle Oil Cooler Pump: 0.4 kW
Chip Shower Pump: 1.5 kW
Chip Flushing Pumps: 1.5 kW × 3
Automatic Tool Changer: 40-Tool Magazine
Tool Positions: 40
Max. Tool Diameter: 96 mm
Max. Tool Diameter with Adjacent Pockets Empty: 130 mm
Max. Tool Length: 300 mm
Max. Tool Weight: 10 kg
Magazine Pocket Pitch: 101.6 mm
Tool-to-Tool Change Time: 2.5 sec
Chip-to-Chip Time: 6.0 sec
Tool Management: Memory Random System
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 91 |
| Last activity | Nov. 2, 2026 |
MATSUURA FX-10
High-Speed Vertical Machining Center
This Matsuura FX-10 (J300) is a high-speed vertical machining center engineered for rapid, precision 3-axis milling. It features a spacious 2,150 × 1,100 mm table with a 1,000 kg load capacity and substantial X and Y travels of 2,000 mm and 1,500 mm. Equipped with an ultra-fast 27,000 rpm spindle capable of 20.3 kW continuous power and a 40-position automatic tool changer (ATC), this machine is optimized for highly efficient, high-speed manufacturing operations.
Technical Details
Manufacturer: Matsuura
Model / Type: FX-10 / J300
Year of Manufacture: 1997
Machine Type: High-Speed Vertical Machining Center
X-Axis Travel: 2,000 mm
Y-Axis Travel: 1,500 mm
Z-Axis Travel: 400 mm
Distance Table Surface – Spindle Nose: 150–550 mm
Distance Spindle Center – Column Guide: 210 mm
Horizontal Clearance Between Columns: 1,400 mm
Table Size: 2,150 × 1,100 mm
Max. Table Load: 1,000 kg
T-Slots: 22 mm × 7 × 165 mm
Spindle Speed Range: 600–27,000 rpm
Spindle Taper: No. 40 / JIS #40
Spindle Bearing Diameter: 60 mm
Spindle Motor Power – 300–6,000 rpm: 5.5 / 7.5 kW rated / max.
Spindle Motor Power – 6,001–27,000 rpm: 20.3 kW continuous
Max. Spindle Torque: 46 Nm at 4,700 rpm
Spindle Brake: Standard
Automatic Spindle Orientation: Standard
Rapid Traverse X/Y/Z: 25,000 mm/min
Working Feed X/Y/Z : 1–10,000 mm/min
Manual Continuous Feed: 1–15,000 mm/min
Manual Feed: 0–4,000 mm/min
Drive Motors
X-Axis Servo Motor: 4.0 kW
Y-Axis Servo Motor: 4.4 kW
Z-Axis Servo Motor with Brake: 2.9 kW
Coolant Pump: 0.33 / 0.52 kW
Central Lubrication Pump: 0.1 kW
Spindle Oil Cooler Pump: 0.4 kW
Chip Shower Pump: 1.5 kW
Chip Flushing Pumps: 1.5 kW × 3
Automatic Tool Changer: 40-Tool Magazine
Tool Positions: 40
Max. Tool Diameter: 96 mm
Max. Tool Diameter with Adjacent Pockets Empty: 130 mm
Max. Tool Length: 300 mm
Max. Tool Weight: 10 kg
Magazine Pocket Pitch: 101.6 mm
Tool-to-Tool Change Time: 2.5 sec
Chip-to-Chip Time: 6.0 sec
Tool Management: Memory Random System
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
## MATSUURA FX-10 Vertical Machining Center
The MATSUURA FX-10 is a vertical machining center manufactured in 1997. It has X-, Y- and Z-axis travels of 2,000 mm, 1,500 mm and 400 mm respectively. The table measures 2,150 × 1,100 mm and has a maximum part-load capacity of 1,000 kg.
The machine is equipped with a spindle rated for speeds up to 27,000 rpm and a spindle motor power of 20.3 kW. The spindle speed range, as stated in the supplied technical details, is 600–27,000 rpm. A 40-position tool magazine is specified. Additional listed tool-changer details include a maximum tool length of 300 mm, maximum tool weight of 10 kg and tool-to-tool change time of 2.5 seconds. The listed spindle taper is No. 40 / JIS #40.
### Main specifications
- Manufacturer: Matsuura
- Model: FX-10
- Year of manufacture: 1997
- Machine type: Vertical machining center
- X-axis travel: 2,000 mm
- Y-axis travel: 1,500 mm
- Z-axis travel: 400 mm
- Table size: 2,150 × 1,100 mm
- Maximum part weight: 1,000 kg
- Maximum spindle speed: 27,000 rpm
- Spindle motor power: 20.3 kW
- Tool pockets: 40
The machine has an enclosed green housing with tall doors and gridded viewing windows. The spindle, machining area, control panel, separate blue cabinet and mounted hand control are present. Coolant hoses and fittings are positioned near the spindle, and a rack holding multiple tool holders is also present.
The exterior, control panel and interior surfaces show signs of use, including scuffs, grime, staining and areas of worn or chipped paint. Loose cables and wires are visible across the exterior and top of the enclosure. Operational condition is not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 91 |
| Last activity | Nov. 2, 2026 |
Вертикален обработващ център MATSUURA FX-10
Vertikální obráběcí centrum MATSUURA FX-10
MATSUURA FX-10 Lodret bearbejdningscenter
MATSUURA FX-10 Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας MATSUURA FX-10
MATSUURA FX-10 Vertical machining center
Centro de mecanizado vertical MATSUURA FX-10
Centre d'usinage vertical MATSUURA FX-10
Vertikalni obradni centar MATSUURA FX-10
MATSUURA FX-10 Függőleges megmunkáló központ
Centro di lavoro verticale MATSUURA FX-10
MATSUURA FX-10 Vertikalus apdirbimo centras
MATSUURA FX-10 Verticaal bewerkingscentrum
Pionowe centrum obróbcze MATSUURA FX-10
Centro de usinagem vertical MATSUURA FX-10
Centru de prelucrare vertical MATSUURA FX-10
MATSUURA FX-10 Вертикальный обрабатывающий центр
Vertikalni obradni centar MATSUURA FX-10
MATSUURA FX-10 Vertikalt bearbetningscenter
Dikey işleme merkezi MATSUURA FX-10
EN
- Languages
English (GB)