Contact us to receive an offer.
| Category | Skinning / filleting machines |
| Capacity | u/mn |
| Length x width x height | 460.0 × 440.0 × 870.0 |
| Weight | 80 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 09/06/2026 |
| Product id | P260609140 |
| Language |
The Marel CT 2635 Grinder is a stainless steel machine designed specifically for grinding circular knives used in filleting machines, including the Marel CT 2630 and MS 2730 models, as well as other machines compatible with circular knives. This grinder helps maintain optimal filleting performance by ensuring knives remain sharp.
The machine features a user-friendly operation where the circular knife is mounted on a knife shaft within the machine's hub. Once the water tray is positioned and the protective shield is closed, grinding is initiated by pressing the start button. The grinding process runs for a short, adjustable time interval, ranging from 1 to 12 seconds. Grinding pressure can be adjusted using weight blocks attached to the rear tooth bar.
Technically, the CT 2635 supports a working range for circular knives with diameters from 100 mm to 250 mm. It operates on a 3x400V + PE or 3x220V + PE electrical supply with a power consumption of 1.2 kW. The machine also requires an air supply of 5 liters per minute at 6-8 bar pressure.
The grinder measures 460 mm in length, 440 mm in width, and 870 mm in height, weighing approximately 80 kg. It includes a mounting kit for filleting machine knives.
Regarding its condition, the machine shows signs of use, including some dirt and wear marks on the lower cabinet and top surface. It is equipped with a two-door cabinet and safety features such as a red emergency stop button and warning labels indicating sharp blades. The front panel includes a ventilation grill and two buttons (green and red) for operation control. Visible power cables are located on the top surface, and the rear panel has a central circular knob or dial.
This grinder is manufactured by Marel Salmon A/S and is identified by the model number CT 2635.00. The year of manufacture is indicated as 2016. It is a robust and essential tool for fish industry operations focusing on filleting efficiency and knife maintenance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
fish industry
filleting machines
Sharp knives optimize production For best illeting performance it is important to use sharp knives at all times. The Grinder CT 2635 is designed for grinding circular knives for Marel illeting machines – CT 2630 and MS 2730 – and other machines that use circular knives. The Grinder CT 2635 provides high quality grinding and is safe and easy to operate. The circular knife is placed on a knife shaft, which is mounted in the hub of the machine. When the water tray is in place and the protection shield is closed, grinding is activated by the start button and stops after a short, adjustable time interval. Weight blocks mounted on the rear tooth bar are used to adjust the grinding pressure. A mounting kit for the illeting machine knives is included.
Technical features Working range: Ø100-Ø250 mm Grinding time: 1-12 sec. (adjustable) Electricity: 3x400V + PE / 3x220V + PE Power consumption: 1.2 kW Air: 5 liters/minute, 6-8 bar Dimensions L x W x H: 460 x 440 x 870 mm Weight: 80 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 113 |
| Last activity | Nov. 15, 2026 |
fish industry
filleting machines
Sharp knives optimize production For best illeting performance it is important to use sharp knives at all times. The Grinder CT 2635 is designed for grinding circular knives for Marel illeting machines – CT 2630 and MS 2730 – and other machines that use circular knives. The Grinder CT 2635 provides high quality grinding and is safe and easy to operate. The circular knife is placed on a knife shaft, which is mounted in the hub of the machine. When the water tray is in place and the protection shield is closed, grinding is activated by the start button and stops after a short, adjustable time interval. Weight blocks mounted on the rear tooth bar are used to adjust the grinding pressure. A mounting kit for the illeting machine knives is included.
Technical features Working range: Ø100-Ø250 mm Grinding time: 1-12 sec. (adjustable) Electricity: 3x400V + PE / 3x220V + PE Power consumption: 1.2 kW Air: 5 liters/minute, 6-8 bar Dimensions L x W x H: 460 x 440 x 870 mm Weight: 80 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Skinning / filleting machines |
| Capacity | u/mn |
| Length x width x height | 460.0 × 440.0 × 870.0 |
| Weight | 80 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 09/06/2026 |
| Product id | P260609140 |
| Language |
The Marel CT 2635 Grinder is a stainless steel machine designed specifically for grinding circular knives used in filleting machines, including the Marel CT 2630 and MS 2730 models, as well as other machines compatible with circular knives. This grinder helps maintain optimal filleting performance by ensuring knives remain sharp.
The machine features a user-friendly operation where the circular knife is mounted on a knife shaft within the machine's hub. Once the water tray is positioned and the protective shield is closed, grinding is initiated by pressing the start button. The grinding process runs for a short, adjustable time interval, ranging from 1 to 12 seconds. Grinding pressure can be adjusted using weight blocks attached to the rear tooth bar.
Technically, the CT 2635 supports a working range for circular knives with diameters from 100 mm to 250 mm. It operates on a 3x400V + PE or 3x220V + PE electrical supply with a power consumption of 1.2 kW. The machine also requires an air supply of 5 liters per minute at 6-8 bar pressure.
The grinder measures 460 mm in length, 440 mm in width, and 870 mm in height, weighing approximately 80 kg. It includes a mounting kit for filleting machine knives.
Regarding its condition, the machine shows signs of use, including some dirt and wear marks on the lower cabinet and top surface. It is equipped with a two-door cabinet and safety features such as a red emergency stop button and warning labels indicating sharp blades. The front panel includes a ventilation grill and two buttons (green and red) for operation control. Visible power cables are located on the top surface, and the rear panel has a central circular knob or dial.
This grinder is manufactured by Marel Salmon A/S and is identified by the model number CT 2635.00. The year of manufacture is indicated as 2016. It is a robust and essential tool for fish industry operations focusing on filleting efficiency and knife maintenance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 113 |
| Last activity | Nov. 15, 2026 |