Contact us to receive an offer.
| Manufacturer | Marangoni |
|---|---|
| Model | LR2 |
| Year | 2009 |
| Location | United Kingdom
|
This listing features a Marangoni LR2 curing press designed for the rubber industry, specifically for tyre manufacturing. The machine is a type curing press manufactured by Marangoni, model LR2, with a manufacturing year listed as 2009. It operates as a fully automatic steam tyre press with a five-segment design, suitable for curing tyres with an internal diameter of up to 800 mm and an internal height adjustable between 200 to 240 mm. The press runs on a three-phase 400 V power supply.
The machine includes spacer plates to accommodate different tyre sizes during the curing process. The control panel is equipped with various buttons and gauges, allowing for operational control and monitoring. It is important to note that the control panel shows signs of dirt and staining, indicative of prior use. The equipment is supported partially on concrete blocks, which may require attention during installation or relocation.
Safety features include visible yellow caution signs indicating 'CAUTION HOT,' highlighting the need for careful operation around heated components. Additionally, there is a sign on the control panel specifying 'TRAINED PERSONNEL ONLY,' emphasizing the importance of qualified operators.
A metal plate affixed to the machine displays technical specifications, including voltage options of 220 V and 110 V, a frequency of 60 Hz, and a power rating of 2.2 kW. The maximum inflation pressure is noted as 20 kg/cm², and the matrices clamping rings have a diameter of 800 mm. The machine weighs approximately 1350 kg. The serial number on the plate is 2467877, and it indicates a manufacturing date of 1977, which may differ from the listed manufacturing year and should be clarified.
The machine shows signs of use and wear, with some dirt and stains visible on the floor around it, and the label on the metal plate has some wear and rust around the edges. Rubber tires or rings are visible stacked on the machine, and wires and cables are connected as part of its setup.
This Marangoni LR2 curing press is suitable for industrial tyre curing operations where a fully automatic hydraulic steam press is required. Potential buyers should consider the condition details and verify the manufacturing year discrepancy before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Refurbished Automatic Hydraulic Marangoni LR2 Tyre Press
Fully automatic steam tyre press
Five segment
Internal Diameter: 800mm
Internal Height: 200 to 240mm
3 Phase 400 V
With spacer plates.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 9 |
| Last activity | Sept. 28, 2026 |
Refurbished Automatic Hydraulic Marangoni LR2 Tyre Press
Fully automatic steam tyre press
Five segment
Internal Diameter: 800mm
Internal Height: 200 to 240mm
3 Phase 400 V
With spacer plates.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features a Marangoni LR2 curing press designed for the rubber industry, specifically for tyre manufacturing. The machine is a type curing press manufactured by Marangoni, model LR2, with a manufacturing year listed as 2009. It operates as a fully automatic steam tyre press with a five-segment design, suitable for curing tyres with an internal diameter of up to 800 mm and an internal height adjustable between 200 to 240 mm. The press runs on a three-phase 400 V power supply.
The machine includes spacer plates to accommodate different tyre sizes during the curing process. The control panel is equipped with various buttons and gauges, allowing for operational control and monitoring. It is important to note that the control panel shows signs of dirt and staining, indicative of prior use. The equipment is supported partially on concrete blocks, which may require attention during installation or relocation.
Safety features include visible yellow caution signs indicating 'CAUTION HOT,' highlighting the need for careful operation around heated components. Additionally, there is a sign on the control panel specifying 'TRAINED PERSONNEL ONLY,' emphasizing the importance of qualified operators.
A metal plate affixed to the machine displays technical specifications, including voltage options of 220 V and 110 V, a frequency of 60 Hz, and a power rating of 2.2 kW. The maximum inflation pressure is noted as 20 kg/cm², and the matrices clamping rings have a diameter of 800 mm. The machine weighs approximately 1350 kg. The serial number on the plate is 2467877, and it indicates a manufacturing date of 1977, which may differ from the listed manufacturing year and should be clarified.
The machine shows signs of use and wear, with some dirt and stains visible on the floor around it, and the label on the metal plate has some wear and rust around the edges. Rubber tires or rings are visible stacked on the machine, and wires and cables are connected as part of its setup.
This Marangoni LR2 curing press is suitable for industrial tyre curing operations where a fully automatic hydraulic steam press is required. Potential buyers should consider the condition details and verify the manufacturing year discrepancy before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 9 |
| Last activity | Sept. 28, 2026 |
Възстановена автоматична хидравлична преса за гуми Marangoni LR2
Repasovaný automatický hydraulický lis na pneumatiky Marangoni LR2
Renoveret automatisk hydraulisk Marangoni LR2-dækpresse
Überholte automatische hydraulische Marangoni LR2-Reifenpresse
Ανακαινισμένη αυτόματη υδραυλική πρέσα ελαστικών Marangoni LR2
Refurbished Automatic Hydraulic Marangoni LR2 Tyre Press
Prensa de neumáticos automática hidráulica Marangoni LR2 reacondicionada
Presse à pneus automatique hydraulique Marangoni LR2 remise à neuf
Obnovljena automatska hidraulična preša za gume Marangoni LR2
Felújított automatikus hidraulikus Marangoni LR2 gumiabroncsprés
Pressa per pneumatici automatica idraulica Marangoni LR2 ricondizionata
Atnaujintas automatinis hidraulinis Marangoni LR2 padangų presas
Gereviseerde automatische hydraulische Marangoni LR2-bandenpers
Odnowiona automatyczna hydrauliczna prasa do opon Marangoni LR2
Prensa de pneus Marangoni LR2 hidráulica automática recondicionada
Presă hidraulică automată pentru anvelope Marangoni LR2 recondiționată
Восстановленный автоматический гидравлический шинный пресс Marangoni LR2
Renovirana automatska hidraulična Marangoni LR2 presa za gume
Renoverad automatisk hydraulisk Marangoni LR2-däckpress
Yenilenmiş Otomatik Hidrolik Marangoni LR2 Lastik Presi
EN
- Languages
English (GB)