| Manufacturer | MAKINO |
|---|---|
| Model | V 33i Graphite |
| Year | 2008 |
| Location | Switzerland
|
This listing features a MAKINO V 33i Graphite vertical machining center manufactured in 2008. The machine has a robust construction with overall dimensions of 3000 mm in length, 2070 mm in width, and 2400 mm in height, weighing approximately 7700 kg. It is equipped with a work table measuring 750 mm by 450 mm, featuring four T-slots with a 100 mm pitch and a T-slot width of 18H8 mm. The table can support a maximum load of 300 kg.
The machining center operates on three axes with travels of 650 mm (X-axis), 450 mm (Y-axis), and 350 mm (Z-axis). It includes a tool magazine with 60 pockets, capable of holding tools up to 80 mm in diameter, 250 mm in length, and weighing up to 7 kg. Tool change time is 4.8 seconds. The spindle features an HSK E50 nose and offers a stepless speed range from 300 to 30,000 rpm, powered by a 17 kW spindle motor with a maximum torque of 23.1 Nm. The spindle nose distance to the table ranges from 150 to 500 mm.
Feed rates range from 1 to 20,000 mm/min with rapid traverse speeds up to 20 m/min. The machine requires a 3-phase 400 Volt power supply at 50 Hz and an air connection pressure between 4 and 8 bar. Total power consumption is approximately 50 kVA.
Additional accessories include a lamp for illumination, an oil mist extractor, spindle cooling system, a workpiece loader branded EROWA EASY ROBOT, and a status light. The machine features a control panel with a screen and multiple buttons located on the right side, double doors with windows providing visibility into the machining area, and an emergency stop button on the left door panel. The machine is branded with the MAKINO logo and labeled as V33iG.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical data
Time under power 124789 Hour
Operating time 41099 Hour
Working time 33577 Hour
Spindle run time 37924 Hour
Number of axis total 3
Table length 750 mm
Table width 450 mm
Number of T-channels 4
Distance of the T-slots 100 mm
T-channel width 18H8 mm
Table load max. 300 kg
Longitudinal travel (X-axis) 650 mm
Transversal travel (y-axis) 450 mm
Vertical travel (z axis) 350 mm
Dimension of the workpice:
Length 750 mm
Width 635 mm
Height 250 mm
Tool magazine number of tool places 60
Tool diameter max. 80 mm
Tool lenght 250 mm
Max. tool-weight 7 kg
Time of tool changing 4.8 sec
Spindle nose: HSK E50
Distance spindle nose to table 150 - 500 mm
Spindle speeds:
stepless
from 300 rpm
up to 30000 rpm
Torque max. 23.1 Nm
Feed range 1 - 20000 mm/min
Rapid traverse: 20 m/min
Air connect 4 - 8 bar
Voltage 50 Hz 3x 400 Volt
Spindle power 17/13 kW
Total power required 50 kVA
Machine's weight about 7700 kg
Overall dimensions machine:
Length 3000 mm
Width 2070 mm
Height 2400 mm
Various accessories:
Lamp
Oil mist extractor
Spindlecooling
Workpiece loader EROWA EASY ROBOT
Status light
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 256 |
| Last activity | Nov. 1, 2026 |
Technical data
Time under power 124789 Hour
Operating time 41099 Hour
Working time 33577 Hour
Spindle run time 37924 Hour
Number of axis total 3
Table length 750 mm
Table width 450 mm
Number of T-channels 4
Distance of the T-slots 100 mm
T-channel width 18H8 mm
Table load max. 300 kg
Longitudinal travel (X-axis) 650 mm
Transversal travel (y-axis) 450 mm
Vertical travel (z axis) 350 mm
Dimension of the workpice:
Length 750 mm
Width 635 mm
Height 250 mm
Tool magazine number of tool places 60
Tool diameter max. 80 mm
Tool lenght 250 mm
Max. tool-weight 7 kg
Time of tool changing 4.8 sec
Spindle nose: HSK E50
Distance spindle nose to table 150 - 500 mm
Spindle speeds:
stepless
from 300 rpm
up to 30000 rpm
Torque max. 23.1 Nm
Feed range 1 - 20000 mm/min
Rapid traverse: 20 m/min
Air connect 4 - 8 bar
Voltage 50 Hz 3x 400 Volt
Spindle power 17/13 kW
Total power required 50 kVA
Machine's weight about 7700 kg
Overall dimensions machine:
Length 3000 mm
Width 2070 mm
Height 2400 mm
Various accessories:
Lamp
Oil mist extractor
Spindlecooling
Workpiece loader EROWA EASY ROBOT
Status light
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features a MAKINO V 33i Graphite vertical machining center manufactured in 2008. The machine has a robust construction with overall dimensions of 3000 mm in length, 2070 mm in width, and 2400 mm in height, weighing approximately 7700 kg. It is equipped with a work table measuring 750 mm by 450 mm, featuring four T-slots with a 100 mm pitch and a T-slot width of 18H8 mm. The table can support a maximum load of 300 kg.
The machining center operates on three axes with travels of 650 mm (X-axis), 450 mm (Y-axis), and 350 mm (Z-axis). It includes a tool magazine with 60 pockets, capable of holding tools up to 80 mm in diameter, 250 mm in length, and weighing up to 7 kg. Tool change time is 4.8 seconds. The spindle features an HSK E50 nose and offers a stepless speed range from 300 to 30,000 rpm, powered by a 17 kW spindle motor with a maximum torque of 23.1 Nm. The spindle nose distance to the table ranges from 150 to 500 mm.
Feed rates range from 1 to 20,000 mm/min with rapid traverse speeds up to 20 m/min. The machine requires a 3-phase 400 Volt power supply at 50 Hz and an air connection pressure between 4 and 8 bar. Total power consumption is approximately 50 kVA.
Additional accessories include a lamp for illumination, an oil mist extractor, spindle cooling system, a workpiece loader branded EROWA EASY ROBOT, and a status light. The machine features a control panel with a screen and multiple buttons located on the right side, double doors with windows providing visibility into the machining area, and an emergency stop button on the left door panel. The machine is branded with the MAKINO logo and labeled as V33iG.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 256 |
| Last activity | Nov. 1, 2026 |
Обработващ център - вертикален MAKINO V 33i Graphite
Obráběcí centrum - vertikální MAKINO V 33i Graphite
MAKINO V 33i Graphite Bearbejdningscenter - lodret
MAKINO V 33i Graphite Bearbeitungszentrum Vertikal
Κέντρο κατεργασίας - κατακόρυφο MAKINO V 33i Graphite
MAKINO V 33i Graphite Machining center - vertical
Centro de mecanizado vertical MAKINO V 33i Graphite
Centre d'usinage vertical MAKINO V 33i Graphite
Obradni centar - vertikalni MAKINO V 33i Graphite
MAKINO V 33i Graphite Megmunkáló központ - függőleges
Centro di lavoro verticale MAKINO V 33i Graphite
Apdirbimo centras – vertikalus MAKINO V 33i Graphite
MAKINO V 33i Graphite Bewerkingscentrum - verticaal
Pionowe centrum obróbcze MAKINO V 33i Graphite
Centro de usinagem - vertical MAKINO V 33i Graphite
Centru de prelucrare - vertical MAKINO V 33i Graphite
MAKINO V 33i Graphite Вертикальный обрабатывающий центр
Obradni centar - vertikalni MAKINO V 33i Graphite
MAKINO V 33i Graphite Bearbetningscentrum - vertikalt
Dikey işleme merkezi MAKINO V 33i Graphite
EN
- Languages
English (GB)