Contact us to receive an offer.
| Manufacturer | MAHO (DMG) |
|---|---|
| Model | MH 700 CB |
| Year | 1987 |
| Location | Germany
|
This is a MAHO (DMG) MH 700 CB vertical machining center manufactured in 1987. The machine features a working travel of 700 mm along the X-axis, 500 mm along the Y-axis, and 600 mm along the Z-axis. It is equipped with a 24-pocket tool changer and a spindle motor delivering 20 kW of power, with a maximum spindle speed of 6300 rpm. The machine can handle a maximum part weight of 200 kg.
The rotary table has a diameter of 520 mm and offers full 360° rotation on the B-axis, as well as swiveling on the A-axis between 20° and 60°. The spindle taper is ISO 40 with hydraulic clamping, and the spindle head can be manually swiveled 90° left or right. The quill stroke measures 80 mm.
Feed rates range from 1 to 3000 mm/min for the X and Z axes, 1 to 4000 mm/min for the Y axis, and 0.1 to 3000 °/min for the B axis. Rapid traverse rates are 10 m/min for X and Z, 8 m/min for Y, and 20 °/min for B. The machine requires approximately 20 kVA of power and weighs around 5.5 tons. Its footprint is approximately 5.2 m by 5.0 m, with a height of 2.3 m.
Additional equipment includes a manual control unit, coolant device, and machine illumination. The machine features a rotary table with T-slots on the bed and a spindle head labeled 'MAHO'. There is a coolant hose with orange and blue nozzles attached to the spindle head. A protective accordion-style cover is installed on the back wall behind the spindle. The machine shows signs of paint wear and surface rust on the rotary table and base, which should be considered when evaluating its condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
x-travel: 700 mm
y-travel: 500 mm
z-travel: 600 mm
table swivelling +/-: A-Achse: 20° / 60° Grad
table rotating: B-Achse: 360° Grad
control: Maho 432 (3-D Bahnsteuerung)
Max. Milling-capacity: ST: 60 und GG: 22 mm
tool changer with: 24 Plätze
number of spindle speeds: 20 - 6300 U/min.
max. table load: 200 kg
spindle taper MT: ISO 40 (hydr. Spannung)
spindle head swivable left - right: 90° (manuell) °
quill stroke: 80 mm
feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min
rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min
interface:
control voltage: 110/220 V
max. torque on the spindle:
total power requirement: ca. 20 kVA
Weight approx.: 5,5 t
dimension machine approx.LxWxH: 3,0 x 2,4 x 2,25 m
space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m
additional information
NC rotary table Ø 520 mm with A and B axes
Adjustable three-phase motor with 4-stage reduction gear
Working spindle can be swiveled out for horizontal spindle
Equipment:
-manual control unit
-coolant device
-machine ilumination
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 120 |
| Last activity | Nov. 6, 2026 |
x-travel: 700 mm
y-travel: 500 mm
z-travel: 600 mm
table swivelling +/-: A-Achse: 20° / 60° Grad
table rotating: B-Achse: 360° Grad
control: Maho 432 (3-D Bahnsteuerung)
Max. Milling-capacity: ST: 60 und GG: 22 mm
tool changer with: 24 Plätze
number of spindle speeds: 20 - 6300 U/min.
max. table load: 200 kg
spindle taper MT: ISO 40 (hydr. Spannung)
spindle head swivable left - right: 90° (manuell) °
quill stroke: 80 mm
feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min
rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min
interface:
control voltage: 110/220 V
max. torque on the spindle:
total power requirement: ca. 20 kVA
Weight approx.: 5,5 t
dimension machine approx.LxWxH: 3,0 x 2,4 x 2,25 m
space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m
additional information
NC rotary table Ø 520 mm with A and B axes
Adjustable three-phase motor with 4-stage reduction gear
Working spindle can be swiveled out for horizontal spindle
Equipment:
-manual control unit
-coolant device
-machine ilumination
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This is a MAHO (DMG) MH 700 CB vertical machining center manufactured in 1987. The machine features a working travel of 700 mm along the X-axis, 500 mm along the Y-axis, and 600 mm along the Z-axis. It is equipped with a 24-pocket tool changer and a spindle motor delivering 20 kW of power, with a maximum spindle speed of 6300 rpm. The machine can handle a maximum part weight of 200 kg.
The rotary table has a diameter of 520 mm and offers full 360° rotation on the B-axis, as well as swiveling on the A-axis between 20° and 60°. The spindle taper is ISO 40 with hydraulic clamping, and the spindle head can be manually swiveled 90° left or right. The quill stroke measures 80 mm.
Feed rates range from 1 to 3000 mm/min for the X and Z axes, 1 to 4000 mm/min for the Y axis, and 0.1 to 3000 °/min for the B axis. Rapid traverse rates are 10 m/min for X and Z, 8 m/min for Y, and 20 °/min for B. The machine requires approximately 20 kVA of power and weighs around 5.5 tons. Its footprint is approximately 5.2 m by 5.0 m, with a height of 2.3 m.
Additional equipment includes a manual control unit, coolant device, and machine illumination. The machine features a rotary table with T-slots on the bed and a spindle head labeled 'MAHO'. There is a coolant hose with orange and blue nozzles attached to the spindle head. A protective accordion-style cover is installed on the back wall behind the spindle. The machine shows signs of paint wear and surface rust on the rotary table and base, which should be considered when evaluating its condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 120 |
| Last activity | Nov. 6, 2026 |
Обработващ център - 5 ос MAHO (DMG) MH 700 CB
Obráběcí centrum - 5 osé MAHO (DMG) MH 700 CB
MAHO (DMG) MH 700 CB Bearbejdningscenter - 5 akset
MAHO (DMG) MH 700 CB Bearbeitungszentrum 5-Achsen
Κέντρο μηχανικής κατεργασίας - 5 άξονες MAHO (DMG) MH 700 CB
MAHO (DMG) MH 700 CB Machining center - 5 axis
Centro de mecanizado 5 ejes MAHO (DMG) MH 700 CB
Centre d'usinage 5 axes MAHO (DMG) MH 700 CB
Obradni centar - 5 osi MAHO (DMG) MH 700 CB
MAHO (DMG) MH 700 CB Megmunkáló központ - 5 tengely
Centro di lavoro 5 assi MAHO (DMG) MH 700 CB
Apdirbimo centras – 5 ašių MAHO (DMG) MH 700 CB
MAHO (DMG) MH 700 CB Bewerkingscentrum - 5 assen
Centrum obróbcze 5osi MAHO (DMG) MH 700 CB
Centro de usinagem - 5 eixos MAHO (DMG) MH 700 CB
Centru de prelucrare - 5 axe MAHO (DMG) MH 700 CB
MAHO (DMG) MH 700 CB 5-осевой обрабатывающий центр
Obradni centar - 5 os MAHO (DMG) MH 700 CB
MAHO (DMG) MH 700 CB Bearbetningscentrum - 5-axligt
5 eksenli işleme merkezi MAHO (DMG) MH 700 CB
EN
- Languages
English (GB)