| Category | Welding machines |
| Length x width x height | 1200.0 × 700.0 × 1400.0 |
| Weight | 650 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible but unplugged |
| Last availability date | 17/11/2026 |
| Product id | P261116004 |
| Language |
Lincoln Electric IDEALARC DC-1500 multiprocess DC arc welding power source for automatic welding applications. The DC-1500 is described as suitable for submerged arc welding and FCAW processes within the machine’s capacity. It supports constant-voltage and constant-current processes and has a single-range, full-output control potentiometer. Its precise output is described as supporting productivity and quality control when used with Lincoln NA-3 or NA-5 automatic wire feeders, or the LT-7 tractor.
The front control panel includes an output-control dial, indicator lights and red and green push buttons. The housing has lower ventilation louvers. The listed machine dimensions are 1200 mm long, 700 mm wide and 1400 mm high, with a listed weight of 650 kg.
The housings show scuffs and surface wear. One unit is shown with its side panels removed, exposing internal electrical assemblies, including wiring, transformer coils, a cooling fan, bus bars, heat-sink assemblies and a populated circuit board. A pale interior panel or insulating shield appears displaced inside the open housing, and the interior panel has scuff marks. Electrical components and wiring are exposed on this unit, so the open enclosure should be noted when handling or assessing it. The units are shown on wooden pallets. Operational status is not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The DC-1500 is a multiprocess DC arc welding power source for automatic welding applications. It produces outstanding arc characteristics on both constant voltage and constant current processes. This provides great welding versatility in a single power source.
The DC-1500 is designed for submerged arc welding, and FCAW processes within the capacity of the machine. It produces outstanding welding performance with a single range full output control potentiometer.
The precise output of the DC-1500 enhances productivity and quality control when used with Lincoln NA-3 and NA-5 automatic wire feeders, and the LT-7 tractor.
A large number of spot can be used normally, and there is no amendment in the original.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery manufacturer |
| Active since | 2026 |
| Offers online | 27 |
| Last activity | Nov. 17, 2026 |
The DC-1500 is a multiprocess DC arc welding power source for automatic welding applications. It produces outstanding arc characteristics on both constant voltage and constant current processes. This provides great welding versatility in a single power source.
The DC-1500 is designed for submerged arc welding, and FCAW processes within the capacity of the machine. It produces outstanding welding performance with a single range full output control potentiometer.
The precise output of the DC-1500 enhances productivity and quality control when used with Lincoln NA-3 and NA-5 automatic wire feeders, and the LT-7 tractor.
A large number of spot can be used normally, and there is no amendment in the original.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Welding machines |
| Length x width x height | 1200.0 × 700.0 × 1400.0 |
| Weight | 650 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible but unplugged |
| Last availability date | 17/11/2026 |
| Product id | P261116004 |
| Language |
Lincoln Electric IDEALARC DC-1500 multiprocess DC arc welding power source for automatic welding applications. The DC-1500 is described as suitable for submerged arc welding and FCAW processes within the machine’s capacity. It supports constant-voltage and constant-current processes and has a single-range, full-output control potentiometer. Its precise output is described as supporting productivity and quality control when used with Lincoln NA-3 or NA-5 automatic wire feeders, or the LT-7 tractor.
The front control panel includes an output-control dial, indicator lights and red and green push buttons. The housing has lower ventilation louvers. The listed machine dimensions are 1200 mm long, 700 mm wide and 1400 mm high, with a listed weight of 650 kg.
The housings show scuffs and surface wear. One unit is shown with its side panels removed, exposing internal electrical assemblies, including wiring, transformer coils, a cooling fan, bus bars, heat-sink assemblies and a populated circuit board. A pale interior panel or insulating shield appears displaced inside the open housing, and the interior panel has scuff marks. Electrical components and wiring are exposed on this unit, so the open enclosure should be noted when handling or assessing it. The units are shown on wooden pallets. Operational status is not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery manufacturer |
| Active since | 2026 |
| Offers online | 27 |
| Last activity | Nov. 17, 2026 |