Contact us to receive an offer.
| Manufacturer | Lanico |
|---|---|
| Model | SVA 50W |
| Year | 2013 |
| Location | Germany
|
Product overview:
Lanico SVA 50W can sealing machine, year 2013. Designed for seaming cans with seamed bottoms (not stackable) in two standard formats: 73 mm and 99 mm can diameter. The unit is intended for continuous sealing operations and is described with a lid magazine and transport mechanism for lids and cans.
Operation and sealing process:
Filled cans are fed into the machine in a non-positive sequence and are singled out by a preceding star wheel. Cans are continuously transferred through the sealing station by the can transport star. A lid is pushed from the lid magazine under the sealing head while a lifting cylinder raises the can to press it against the sealing head. The can is set into rotation and sealed using four sealing rollers. After sealing, the can is braked and clamped out, then pushed by the can transport star onto the discharge belt. The feed and sealing steps are coordinated so a new can is fed while the previous can is discharged.
Electrical and pneumatic requirements:
Three-phase brake motor 230/400 V, 50 Hz, IP56, with control box and PLC control. Compressed air requirement: 4.5 bar.
Sealing range and capacity:
Sealing diameter range: 46–113 mm, optionally up to 153 mm. Acceptable can heights: 40–250 mm. Performance is specified as up to 3,000 seals per hour, depending on can format and the filled product.
Notes:
No additional components, visible accessories, or condition details are provided beyond the technical and operational information above.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
sealing machines
can sealing machine
Can sealing machine, make Lanico, type SVA 50W, year 2013
Formats for 73 and 99 mm can diameter, the bottom is seamed (not stackable),
The filled cans enter the system in a non-positive sequence.
To increase machine performance while minimizing any spillage losses, the
cans are singled out by a preceding star and continuously fed through the can transport star of the
sealing station. At the same time, the lid is pushed from the lid magazine under the sealing head, the can is lifted by a lifting cylinder, pressed against the sealing head, set into
rotation, and sealed on each machine with 4 sealing rollers. Afterwards, the can is braked, clamped out, and pushed by the can transport star onto the discharge belt. Simultaneously,
a new can is fed.
Electrical installation:
Three-phase brake motor 230 / 400 volts, 50 Hz., IP 56, with control box and PLC control
Compressed air: 4.5 bar
Sealing range:
46 - 113 mm diameter, optionally up to ∅ 153 mm
40 - 250 mm height.
Performance: depending on can format and filling product up to 3,000 seals per hour.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this Lanico SVA 50W can sealing machine manufactured?
This Lanico SVA 50W can sealing machine (Ref: UCD0002) from 2013.
What is this Lanico SVA 50W Form-, Fill- and Seal machine?
This Lanico SVA 50W Form-, Fill- and Seal machine (FFS) is a form-fill-seal packaging machine.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 109 |
| Last activity | Oct. 26, 2026 |
sealing machines
can sealing machine
Can sealing machine, make Lanico, type SVA 50W, year 2013
Formats for 73 and 99 mm can diameter, the bottom is seamed (not stackable),
The filled cans enter the system in a non-positive sequence.
To increase machine performance while minimizing any spillage losses, the
cans are singled out by a preceding star and continuously fed through the can transport star of the
sealing station. At the same time, the lid is pushed from the lid magazine under the sealing head, the can is lifted by a lifting cylinder, pressed against the sealing head, set into
rotation, and sealed on each machine with 4 sealing rollers. Afterwards, the can is braked, clamped out, and pushed by the can transport star onto the discharge belt. Simultaneously,
a new can is fed.
Electrical installation:
Three-phase brake motor 230 / 400 volts, 50 Hz., IP 56, with control box and PLC control
Compressed air: 4.5 bar
Sealing range:
46 - 113 mm diameter, optionally up to ∅ 153 mm
40 - 250 mm height.
Performance: depending on can format and filling product up to 3,000 seals per hour.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this Lanico SVA 50W can sealing machine manufactured?
This Lanico SVA 50W can sealing machine (Ref: UCD0002) from 2013.
What is this Lanico SVA 50W Form-, Fill- and Seal machine?
This Lanico SVA 50W Form-, Fill- and Seal machine (FFS) is a form-fill-seal packaging machine.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Product overview:
Lanico SVA 50W can sealing machine, year 2013. Designed for seaming cans with seamed bottoms (not stackable) in two standard formats: 73 mm and 99 mm can diameter. The unit is intended for continuous sealing operations and is described with a lid magazine and transport mechanism for lids and cans.
Operation and sealing process:
Filled cans are fed into the machine in a non-positive sequence and are singled out by a preceding star wheel. Cans are continuously transferred through the sealing station by the can transport star. A lid is pushed from the lid magazine under the sealing head while a lifting cylinder raises the can to press it against the sealing head. The can is set into rotation and sealed using four sealing rollers. After sealing, the can is braked and clamped out, then pushed by the can transport star onto the discharge belt. The feed and sealing steps are coordinated so a new can is fed while the previous can is discharged.
Electrical and pneumatic requirements:
Three-phase brake motor 230/400 V, 50 Hz, IP56, with control box and PLC control. Compressed air requirement: 4.5 bar.
Sealing range and capacity:
Sealing diameter range: 46–113 mm, optionally up to 153 mm. Acceptable can heights: 40–250 mm. Performance is specified as up to 3,000 seals per hour, depending on can format and the filled product.
Notes:
No additional components, visible accessories, or condition details are provided beyond the technical and operational information above.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 109 |
| Last activity | Oct. 26, 2026 |
Линия за формоване, пълнене и запечатване (FFS) Lanico SVA 50W
Linka pro tvarování, plnění a uzavírání (FFS) Lanico SVA 50W
Lanico SVA 50W Form-, fylde- og forseglingslinje (FFS)
Lanico SVA 50W Form-, Füll- und Siegelanlage (FFS)
Γραμμή διαμόρφωσης, πλήρωσης και σφράγισης (FFS) Lanico SVA 50W
Lanico SVA 50W Form, Fill and Seal (FFS) line
Línea de formado, llenado y sellado (FFS) Lanico SVA 50W
Ligne de formage, remplissage et scellage (FFS) Lanico SVA 50W
Linija za oblikovanje, punjenje i zavarivanje (FFS) Lanico SVA 50W
Lanico SVA 50W Formázó, töltő és lezáró sor (FFS)
Linea di formatura, riempimento e saldatura (FFS) Lanico SVA 50W
Lanico SVA 50W Formavimo, pildymo ir sandarinimo linija (FFS)
Lanico SVA 50W Vorm-, vul- en seallijn (FFS)
Linia formowania, napełniania i zgrzewania (FFS) Lanico SVA 50W
Linha de formação, enchimento e selagem (FFS) Lanico SVA 50W
Linie de formare, umplere și sigilare (FFS) Lanico SVA 50W
Lanico SVA 50W Линия формирования, наполнения и запайки (FFS)
Linija za formiranje, punjenje i zaptivanje (FFS) Lanico SVA 50W
Lanico SVA 50W Form-, fyll- och förslutningslinje (FFS)
Şekillendirme, doldurma ve kapatma hattı (FFS) Lanico SVA 50W
EN
- Languages
English (GB)