| Manufacturer | KUNZMANN |
|---|---|
| Model | WF 610 M |
| Year | 2026 |
| Location | Germany
|
KUNZMANN WF 610 M 3-axis milling machine, manufactured in 2026. The machine has electronically regulated, stepless servo drives on each axis and an electronically regulated, stepless main drive for the vertical milling spindle. The listed axis travels are 310 mm on X, 400 mm on Y and 450 mm on Z. Maximum spindle speed is 4,500 rpm. Spindle drive power is stated as 8.5 kW (S1, 100% ED) and 16.2 kW (S6, 25% ED), with an SK 40 tool interface. Rapid traverse rates are listed as up to 5 m/min on X and Y and 4 m/min on Z.
The machine is fitted with a rigid angle table measuring 800 x 425 mm, with a maximum table load of 300 kg. The vertical milling head swivels +/- 90 degrees and has a manually extendable, clampable quill with 70 mm stroke. Tool clamping is automatic and mechanical, with hydraulic release. The measuring system uses direct, incremental, distance-coded linear scales with 0.001 mm resolution. Safety handwheels are provided on all three axes.
Control is by HEIDENHAIN TNC 128. A freestanding control panel with display, keypad and buttons is present, along with a portable HEIDENHAIN HR 510 FS electronic handwheel. The machine also has a coolant system, automatic central lubrication and an LED work light. Electrical supply is specified as 400 V, three-phase, 50 Hz. Base installation weight is approximately 2,000 kg; maximum transport weight is 2,100 kg.
The white-and-red machine has an exposed T-slot worktable, bellows-covered column and red cabinet panels. Its surfaces appear clean and intact, with light surface marks visible on a panel. A coolant or auxiliary unit with hoses is positioned beside the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This new 3-axis KUNZMANN WF 610 M was manufactured in 2026. It features a longitudinal travel of 610 mm, cross travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with an electronically regulated main drive for the vertical milling spindle and a rigid angle table with a clamping surface of 800 x 425 mm. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 610 M universal machining centre. Contact us for further details.- New Machine
- Main drive: Electronically regulated stepless main drive for vertical milling spindle
- Spindle drive power: 8.5 kW (S1 - 100% ED) / 16.2 kW (S6 - 25% ED)
- Tool interface: SK 40 DIN ISO 7388
-1 Form AD (formerly DIN 69871 Form AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872)
- Feed drives: Electronically regulated stepless servo drive per axis
- Rapid traverse rate X / Y / Z: up to max. 5 / 5 / 4 m/min (stepless)
- Table type: Rigid angle table (Winkeltisch, starr)
- Clamping surface: 800 x 425 mm
- T-slots: 6 x 14 H7 (pitch / spacing: 63 mm)
- Max. table load: 300 kg
- Vertical milling head: Swivelling +/- 90°, manually extendable quill with lever, stroke 70 mm (clampable), speed-dependent air cooling
- Tool clamping: Automatic mechanical tool clamping, clamping force 10,000 N (hydraulic release)
- Measuring system: Distance-coded linear scale systems, direct, incremental, resolution 0.001 mm
- Safety handwheels: In all 3 axes
- Electronic handwheel: Portable HEIDENHAIN HR 510 FS with integrated axis selection keys, feed rate potentiometer, and emergency stop button (including bracket on control panel)
- Operating voltage: 400 V / 3-phase / 50 Hz
- Nominal current / Backup fuse: 20 A / 25 A
- Connected load: 13 kVA - Control voltage: 24 V
- Base machine installation weight: approx. 2,000 kg (including fluids, without options/tools)
- Max. transport weight: 2,100 kg
- Coolant system: Free-standing container, capacity 66 liters
- Central lubrication: Automatic central lubrication system with separate, easily accessible residual oil container
- Work light: LED flexible arm lamp
- Machine leveling elements: 1 set = 4 pieces
Control Brand: HEIDENHAIN
Control Model: TNC 128
Number of Axes: 3
Spindle Speed: 4500 RPM
X-axis Travel: 310 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This new 3-axis KUNZMANN WF 610 M was manufactured in 2026. It features a longitudinal travel of 610 mm, cross travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with an electronically regulated main drive for the vertical milling spindle and a rigid angle table with a clamping surface of 800 x 425 mm. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 610 M universal machining centre. Contact us for further details.- New Machine
- Main drive: Electronically regulated stepless main drive for vertical milling spindle
- Spindle drive power: 8.5 kW (S1 - 100% ED) / 16.2 kW (S6 - 25% ED)
- Tool interface: SK 40 DIN ISO 7388
-1 Form AD (formerly DIN 69871 Form AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872)
- Feed drives: Electronically regulated stepless servo drive per axis
- Rapid traverse rate X / Y / Z: up to max. 5 / 5 / 4 m/min (stepless)
- Table type: Rigid angle table (Winkeltisch, starr)
- Clamping surface: 800 x 425 mm
- T-slots: 6 x 14 H7 (pitch / spacing: 63 mm)
- Max. table load: 300 kg
- Vertical milling head: Swivelling +/- 90°, manually extendable quill with lever, stroke 70 mm (clampable), speed-dependent air cooling
- Tool clamping: Automatic mechanical tool clamping, clamping force 10,000 N (hydraulic release)
- Measuring system: Distance-coded linear scale systems, direct, incremental, resolution 0.001 mm
- Safety handwheels: In all 3 axes
- Electronic handwheel: Portable HEIDENHAIN HR 510 FS with integrated axis selection keys, feed rate potentiometer, and emergency stop button (including bracket on control panel)
- Operating voltage: 400 V / 3-phase / 50 Hz
- Nominal current / Backup fuse: 20 A / 25 A
- Connected load: 13 kVA - Control voltage: 24 V
- Base machine installation weight: approx. 2,000 kg (including fluids, without options/tools)
- Max. transport weight: 2,100 kg
- Coolant system: Free-standing container, capacity 66 liters
- Central lubrication: Automatic central lubrication system with separate, easily accessible residual oil container
- Work light: LED flexible arm lamp
- Machine leveling elements: 1 set = 4 pieces
Control Brand: HEIDENHAIN
Control Model: TNC 128
Number of Axes: 3
Spindle Speed: 4500 RPM
X-axis Travel: 310 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
KUNZMANN WF 610 M 3-axis milling machine, manufactured in 2026. The machine has electronically regulated, stepless servo drives on each axis and an electronically regulated, stepless main drive for the vertical milling spindle. The listed axis travels are 310 mm on X, 400 mm on Y and 450 mm on Z. Maximum spindle speed is 4,500 rpm. Spindle drive power is stated as 8.5 kW (S1, 100% ED) and 16.2 kW (S6, 25% ED), with an SK 40 tool interface. Rapid traverse rates are listed as up to 5 m/min on X and Y and 4 m/min on Z.
The machine is fitted with a rigid angle table measuring 800 x 425 mm, with a maximum table load of 300 kg. The vertical milling head swivels +/- 90 degrees and has a manually extendable, clampable quill with 70 mm stroke. Tool clamping is automatic and mechanical, with hydraulic release. The measuring system uses direct, incremental, distance-coded linear scales with 0.001 mm resolution. Safety handwheels are provided on all three axes.
Control is by HEIDENHAIN TNC 128. A freestanding control panel with display, keypad and buttons is present, along with a portable HEIDENHAIN HR 510 FS electronic handwheel. The machine also has a coolant system, automatic central lubrication and an LED work light. Electrical supply is specified as 400 V, three-phase, 50 Hz. Base installation weight is approximately 2,000 kg; maximum transport weight is 2,100 kg.
The white-and-red machine has an exposed T-slot worktable, bellows-covered column and red cabinet panels. Its surfaces appear clean and intact, with light surface marks visible on a panel. A coolant or auxiliary unit with hoses is positioned beside the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
CNC универсална фрезова машина KUNZMANN WF 610 M
CNC univerzální frézka KUNZMANN WF 610 M
KUNZMANN WF 610 M CNC universel fræsemaskine
KUNZMANN WF 610 M CNC Universalfräsmaschine
Φρέζα CNC γενικής χρήσης KUNZMANN WF 610 M
KUNZMANN WF 610 M CNC universal milling machine
Fresadora universal CNC KUNZMANN WF 610 M
Fraiseuse universelle CNC KUNZMANN WF 610 M
CNC univerzalna glodalica KUNZMANN WF 610 M
KUNZMANN WF 610 M CNC univerzális marógép
Fresatrice universale CNC KUNZMANN WF 610 M
KUNZMANN WF 610 M CNC universali frezavimo staklė
KUNZMANN WF 610 M CNC universele freesmachine
Frezarka uniwersalna CNC KUNZMANN WF 610 M
Fresadora universal CNC KUNZMANN WF 610 M
Mașină de frezat universală CNC KUNZMANN WF 610 M
KUNZMANN WF 610 M Универсальный фрезерный станок с ЧПУ
CNC univerzalna glodalica KUNZMANN WF 610 M
KUNZMANN WF 610 M CNC universell fräsmaskin
CNC üniversal freze tezgâhı KUNZMANN WF 610 M
EN
- Languages
English (GB)