| Manufacturer | Krauss Maffei |
|---|---|
| Model | KM 850 - 6100 MX |
| Year | 2012 |
| Location | Germany
|
Injection Moulding Machine by Krauss Maffei, model KM 850 - 6100 MX, manufactured in 2012. This industrial machine is designed for forming applications with a clamping force of 8500 kN. It features a mould opening force of up to 560 kN and travel forces for the movable platen of 89 kN (opening) and 92 kN (closing). The mould platens measure 1600 x 1600 mm, with a tie bar spacing of 1140 x 1140 mm. The mould opening stroke reaches 1600 mm, accommodating mould heights from 500 to 1100 mm, and a maximum daylight of 2100 mm. The hydraulic ejector has a stroke of 300 mm and an ejector force of 200/100 kN.
The injection unit includes a 95 mm diameter screw with an L/D ratio of 23. It provides an injection pressure of 1795 bar and a stroke volume of 3367 ccm. The shot weight for polystyrene is 3064 grams, with an injection rate of 690 ccm/s and a maximum plasticising rate of 104 g/s. The screw speed can reach up to 116 rpm, and the nozzle pressure is 166 kN.
Equipped with a 90 kW pump motor and 53 kW of installed heating capacity distributed over 7 adjustable barrel heating zones, the machine has an oil reservoir capacity of 1500 liters. Dimensions are approximately 11.00 m in length, 3.00 m in width, and 2.60 m in height, with a total weight of 43,000 kg. The maximum mould weight supported is 12,200 kg.
Additional features include anti-vibration pads, one air valve, four hydraulic core pulls, twelve hydraulic sequential valves, two 12-fold water flow regulators, and a robot interface compliant with Euromap 67 standards.
The machine is located in Eschweiler, Germany, and operates under the MC 5 control system with German language screen text. Visual inspection shows a clean and well-maintained machine with white and blue panels, a visible hopper for raw material feeding, multiple control panel doors with ventilation grilles, and safety railings with an access ladder. The platen surface shows some wear marks but no major damage. The frame is painted black and blue. The machine is offered as-is, where-is.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Used Injection Moulding Machine
Manufacturer: Krauss Maffei
Model: KM 850 - 6100 MX
Year of Manufacture: 2012
Location: Eschweiler, Germany
Working Hours: 25,000 h
Control Version: MC 5
Screen Text: German
Clamping Unit:
- Clamping Force: 8500 kN
- Mould Opening Force (max): 560 kN
- Travel Force Movable Platen Opening: 89 kN
- Travel Force Movable Platen Closing: 92 kN
- Size of Mould Platens (h x v): 1600 x 1600 mm
- Distance Between Tie Bars (h x v): 1140 x 1140 mm
- Mould Opening Stroke: 1600 mm
- Mould Height (min/max): 500/1100 mm
- Max. Daylight: 2100 mm
- Hydraulic Ejector Stroke: 300 mm
- Ejector Force: 200/100 kN
Injection Unit:
- Screw Diameter: 95 mm
- Ls/D Ratio: 23
- Injection Pressure: 1795 bar
- Stroke Volume: 3367 ccm
- Shot Weight (PS): 3064 gr.
- Injection Rate: 690 ccm/s
- Screw Speed: 116 1/min
- Plasticising Rate (max): 104 g/s
- Nozzle Pressure: 166 kN
Electric and Hydraulic Equipment:
- Nominal Capacity of Pump Motor: 90 kW
- Installed Heating Capacity: 53 kW
- Adjustable Barrel Heating Zones: 7
- Oil Reservoir Capacity: 1500 ltr.
Dimensions and Weights:
- Dimensions of the Machine: ca. 11.00 x 3.00 x 2.60 m
- Total Machine Weight: 43,000 kg
- Max. Mould Weight: 12,200 kg
Accessories:
- Anti Vibration Pads
Additional Options:
- 1 x Air Valve
- 4 x Hydraulic Core Pulls
- 12 x Hydraulic Sequential Valves
- 2 x 12 Folds Water Flow Regulator
- Robot Interface According to Euromap 67
Technical Condition: As-is, where-is
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 16 |
| Last activity | Sept. 16, 2026 |
Used Injection Moulding Machine
Manufacturer: Krauss Maffei
Model: KM 850 - 6100 MX
Year of Manufacture: 2012
Location: Eschweiler, Germany
Working Hours: 25,000 h
Control Version: MC 5
Screen Text: German
Clamping Unit:
- Clamping Force: 8500 kN
- Mould Opening Force (max): 560 kN
- Travel Force Movable Platen Opening: 89 kN
- Travel Force Movable Platen Closing: 92 kN
- Size of Mould Platens (h x v): 1600 x 1600 mm
- Distance Between Tie Bars (h x v): 1140 x 1140 mm
- Mould Opening Stroke: 1600 mm
- Mould Height (min/max): 500/1100 mm
- Max. Daylight: 2100 mm
- Hydraulic Ejector Stroke: 300 mm
- Ejector Force: 200/100 kN
Injection Unit:
- Screw Diameter: 95 mm
- Ls/D Ratio: 23
- Injection Pressure: 1795 bar
- Stroke Volume: 3367 ccm
- Shot Weight (PS): 3064 gr.
- Injection Rate: 690 ccm/s
- Screw Speed: 116 1/min
- Plasticising Rate (max): 104 g/s
- Nozzle Pressure: 166 kN
Electric and Hydraulic Equipment:
- Nominal Capacity of Pump Motor: 90 kW
- Installed Heating Capacity: 53 kW
- Adjustable Barrel Heating Zones: 7
- Oil Reservoir Capacity: 1500 ltr.
Dimensions and Weights:
- Dimensions of the Machine: ca. 11.00 x 3.00 x 2.60 m
- Total Machine Weight: 43,000 kg
- Max. Mould Weight: 12,200 kg
Accessories:
- Anti Vibration Pads
Additional Options:
- 1 x Air Valve
- 4 x Hydraulic Core Pulls
- 12 x Hydraulic Sequential Valves
- 2 x 12 Folds Water Flow Regulator
- Robot Interface According to Euromap 67
Technical Condition: As-is, where-is
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Injection Moulding Machine by Krauss Maffei, model KM 850 - 6100 MX, manufactured in 2012. This industrial machine is designed for forming applications with a clamping force of 8500 kN. It features a mould opening force of up to 560 kN and travel forces for the movable platen of 89 kN (opening) and 92 kN (closing). The mould platens measure 1600 x 1600 mm, with a tie bar spacing of 1140 x 1140 mm. The mould opening stroke reaches 1600 mm, accommodating mould heights from 500 to 1100 mm, and a maximum daylight of 2100 mm. The hydraulic ejector has a stroke of 300 mm and an ejector force of 200/100 kN.
The injection unit includes a 95 mm diameter screw with an L/D ratio of 23. It provides an injection pressure of 1795 bar and a stroke volume of 3367 ccm. The shot weight for polystyrene is 3064 grams, with an injection rate of 690 ccm/s and a maximum plasticising rate of 104 g/s. The screw speed can reach up to 116 rpm, and the nozzle pressure is 166 kN.
Equipped with a 90 kW pump motor and 53 kW of installed heating capacity distributed over 7 adjustable barrel heating zones, the machine has an oil reservoir capacity of 1500 liters. Dimensions are approximately 11.00 m in length, 3.00 m in width, and 2.60 m in height, with a total weight of 43,000 kg. The maximum mould weight supported is 12,200 kg.
Additional features include anti-vibration pads, one air valve, four hydraulic core pulls, twelve hydraulic sequential valves, two 12-fold water flow regulators, and a robot interface compliant with Euromap 67 standards.
The machine is located in Eschweiler, Germany, and operates under the MC 5 control system with German language screen text. Visual inspection shows a clean and well-maintained machine with white and blue panels, a visible hopper for raw material feeding, multiple control panel doors with ventilation grilles, and safety railings with an access ladder. The platen surface shows some wear marks but no major damage. The frame is painted black and blue. The machine is offered as-is, where-is.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 16 |
| Last activity | Sept. 16, 2026 |
Машина за пластмаса Krauss Maffei KM 850 - 6100 MX
Plastový stroj Krauss Maffei KM 850 - 6100 MX
Krauss Maffei KM 850 - 6100 MX Plastmaskine
Krauss Maffei KM 850 - 6100 MX Kunststoffmaschine
Πλαστική μηχανή Krauss Maffei KM 850 - 6100 MX
Krauss Maffei KM 850 - 6100 MX Plastic machine
Máquina de plástico Krauss Maffei KM 850 - 6100 MX
Machine pour le plastique Krauss Maffei KM 850 - 6100 MX
Stroj za plastiku Krauss Maffei KM 850 - 6100 MX
Krauss Maffei KM 850 - 6100 MX Műanyaggyártó gép
Macchina per la lavorazione della plastica Krauss Maffei KM 850 - 6100 MX
Plastikinė mašina Krauss Maffei KM 850 - 6100 MX
Krauss Maffei KM 850 - 6100 MX Kunststofmachine
Maszyna do tworzyw sztucznych Krauss Maffei KM 850 - 6100 MX
Máquina de plástico Krauss Maffei KM 850 - 6100 MX
Mașină de plastic Krauss Maffei KM 850 - 6100 MX
Krauss Maffei KM 850 - 6100 MX Пластиковая машина
Mašina za plastiku Krauss Maffei KM 850 - 6100 MX
Krauss Maffei KM 850 - 6100 MX Plastmaskin
Plastik makinesi Krauss Maffei KM 850 - 6100 MX
EN
- Languages
English (GB)