Contact us to receive an offer.
| Manufacturer | Krauss Maffei |
|---|---|
| Model | KM 80 - 390 C1 |
| Year | 2004 |
| Location | Poland
|
This Krauss Maffei KM 80 - 390 C1 injection molding machine was manufactured in 2004. It features a closing force of 80 tons, suitable for a range of medium-sized molding applications. The machine has an auger diameter of 40 mm and a clearance between columns measuring 405 mm. It offers an injection volume of 204 cm³ and an injection weight of 185 grams, with an injection pressure rated at 1860 bar. The power supply requirements include a 15 kW main power input and 9 kW for heaters. The machine's dimensions are approximately 4100 mm in length, 1400 mm in width, and 2020 mm in height, with a total weight of around 3500 kg. It has recorded 29,636 operating hours.
The machine is equipped with a control panel located on the right side, featuring a screen and several buttons for operational control. A material feed or drying unit is attached at the front bottom left, facilitating material handling during production. The machine is housed within a protective enclosure, enhancing operator safety. It appears clean and well-maintained with no visible damage, indicating good upkeep. The electrical specifications include a 3-phase, 400 V, 50 Hz power supply, with a main fuse rated at 80 A, motor fuse at 30 A, and a nominal current of 57 A. This injection molding machine is installed indoors on a green floor with rubber mats nearby, suggesting a stable and safe working environment.
Overall, this Krauss Maffei KM 80 - 390 C1 is a robust and well-equipped machine suitable for various injection molding tasks, offering reliable technical specifications and user-friendly controls.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Production year 2004.
Technical data:
Closing force - 80 T
Auger diameter - 40 mm
Clearance between columns - 405 mm
Injection volume - 204 cm³
Injection weight - 185 g
Injection pressure - 1860 bar
Power supply - 15 kW
Heaters - 9 kW
Number of working hours - 29636
Dimensions - 4100 × 1400 × 2020
Weight - 3500 kg
Number of operating hours - 29636 h
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – large company |
| Active since | 2023 |
| Offers online | 7 |
| Last activity | March 22, 2026 |
Production year 2004.
Technical data:
Closing force - 80 T
Auger diameter - 40 mm
Clearance between columns - 405 mm
Injection volume - 204 cm³
Injection weight - 185 g
Injection pressure - 1860 bar
Power supply - 15 kW
Heaters - 9 kW
Number of working hours - 29636
Dimensions - 4100 × 1400 × 2020
Weight - 3500 kg
Number of operating hours - 29636 h
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Krauss Maffei KM 80 - 390 C1 injection molding machine was manufactured in 2004. It features a closing force of 80 tons, suitable for a range of medium-sized molding applications. The machine has an auger diameter of 40 mm and a clearance between columns measuring 405 mm. It offers an injection volume of 204 cm³ and an injection weight of 185 grams, with an injection pressure rated at 1860 bar. The power supply requirements include a 15 kW main power input and 9 kW for heaters. The machine's dimensions are approximately 4100 mm in length, 1400 mm in width, and 2020 mm in height, with a total weight of around 3500 kg. It has recorded 29,636 operating hours.
The machine is equipped with a control panel located on the right side, featuring a screen and several buttons for operational control. A material feed or drying unit is attached at the front bottom left, facilitating material handling during production. The machine is housed within a protective enclosure, enhancing operator safety. It appears clean and well-maintained with no visible damage, indicating good upkeep. The electrical specifications include a 3-phase, 400 V, 50 Hz power supply, with a main fuse rated at 80 A, motor fuse at 30 A, and a nominal current of 57 A. This injection molding machine is installed indoors on a green floor with rubber mats nearby, suggesting a stable and safe working environment.
Overall, this Krauss Maffei KM 80 - 390 C1 is a robust and well-equipped machine suitable for various injection molding tasks, offering reliable technical specifications and user-friendly controls.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2023 |
| Offers online | 7 |
| Last activity | March 22, 2026 |
Машина за леене под налягане Krauss Maffei KM 80 - 390 C1
Vstřikolis Krauss Maffei KM 80 - 390 C1
Krauss Maffei KM 80 - 390 C1 Sprøjtestøbemaskine
Krauss Maffei KM 80 - 390 C1 Spritzgießmaschine
Μηχανή χύτευσης με έγχυση Krauss Maffei KM 80 - 390 C1
Krauss Maffei KM 80 - 390 C1 Injection moulding machine
Inyectora de plástico Krauss Maffei KM 80 - 390 C1
Presse à injecter Krauss Maffei KM 80 - 390 C1
Stroj za injekcijsko prešanje Krauss Maffei KM 80 - 390 C1
Krauss Maffei KM 80 - 390 C1 Fröccsöntő gép
Pressa ad iniezione Krauss Maffei KM 80 - 390 C1
Įpurškimo formavimo mašina Krauss Maffei KM 80 - 390 C1
Krauss Maffei KM 80 - 390 C1 Spuitgietmachine
Wtryskarka Krauss Maffei KM 80 - 390 C1
Máquina de injecção Krauss Maffei KM 80 - 390 C1
Mașină de turnat prin injecție Krauss Maffei KM 80 - 390 C1
Krauss Maffei KM 80 - 390 C1 Термопластавтомат
Mašina za brizganje Krauss Maffei KM 80 - 390 C1
Krauss Maffei KM 80 - 390 C1 Formsprutningsmaskin
Enjeksiyon kalıplama makinesi Krauss Maffei KM 80 - 390 C1
EN
- Languages
English (GB)