Contact us to receive an offer.
| Category | Dust collectors / exhausters |
| Fan | Yes |
| Engine power | 5.5 kW |
| Weight | 103 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | yes |
| status | visible but unplugged |
| Last availability date | 18/11/2026 |
| Product id | P261117140 |
| Language |
Used Kongskilde MDT 30 ATEX centrifugal material-handling fan, identified on the housing as KONGSKILDE MTD 30. The nameplate gives the fan type as JK-30D R and shows a 5.5 kW motor. The motor is included. The unit weighs 103 kg and was manufactured in 2006. The nameplate also carries CE and ATEX markings and indicates suitability for dust atmospheres.
This is a direct-driven fan designed for pneumatic conveying, with conveyed material passing through the impeller. It was used to transport plastic granulate and regrind on an extrusion line, and is also described as suitable for trim, chips, wood shavings, grain and similar materials. Supplied fittings include a galvanised inlet reducer, a flanged outlet transition and a base frame. The fan housing has a tapered upper duct connection and a side outlet.
The equipment is used and has been stored. Dust residue, scuffs, paint wear and other surface marks are present. The duct opening is uncovered. The fan has not been tested since removal and is sold as seen; its operating condition has therefore not been confirmed. Please note that the photos show other equipment nearby, including a separate fan marked KONGSKILDE KM 35; this listing describes the MDT 30 ATEX unit.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Used Kongskilde MTD 30 centrifugal transport fan (manufactured by JKF, type JK-30D R). It was used for pneumatic conveying of plastic granulate and regrind on an extrusion line.
Type: Kongskilde MTD 30
Motor: 5,5 kW, 2.800 rpm, 400/690 V, 50 Hz. Motor included.
Max. fan speed 3.200 rpm, max. air temperature 60 °C
ATEX: Ex II 2 D T6 (approved for dust atmospheres)
Weight 103 kg. Year 2006. Mfg. no. 3134010. CE marked
Direct-driven material-handling fan. Material can pass through the impeller.
Suitable for granulate, regrind, trim, chips, wood shavings, grain and similar
Comes with galvanised inlet reducer, flanged outlet transition and base frame
Condition: Used and stored. Light dust residue and paint wear. Not tested since removal. Sold as seen.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 10 |
| Last activity | Nov. 18, 2026 |
Used Kongskilde MTD 30 centrifugal transport fan (manufactured by JKF, type JK-30D R). It was used for pneumatic conveying of plastic granulate and regrind on an extrusion line.
Type: Kongskilde MTD 30
Motor: 5,5 kW, 2.800 rpm, 400/690 V, 50 Hz. Motor included.
Max. fan speed 3.200 rpm, max. air temperature 60 °C
ATEX: Ex II 2 D T6 (approved for dust atmospheres)
Weight 103 kg. Year 2006. Mfg. no. 3134010. CE marked
Direct-driven material-handling fan. Material can pass through the impeller.
Suitable for granulate, regrind, trim, chips, wood shavings, grain and similar
Comes with galvanised inlet reducer, flanged outlet transition and base frame
Condition: Used and stored. Light dust residue and paint wear. Not tested since removal. Sold as seen.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Dust collectors / exhausters |
| Fan | Yes |
| Engine power | 5.5 kW |
| Weight | 103 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | yes |
| status | visible but unplugged |
| Last availability date | 18/11/2026 |
| Product id | P261117140 |
| Language |
Used Kongskilde MDT 30 ATEX centrifugal material-handling fan, identified on the housing as KONGSKILDE MTD 30. The nameplate gives the fan type as JK-30D R and shows a 5.5 kW motor. The motor is included. The unit weighs 103 kg and was manufactured in 2006. The nameplate also carries CE and ATEX markings and indicates suitability for dust atmospheres.
This is a direct-driven fan designed for pneumatic conveying, with conveyed material passing through the impeller. It was used to transport plastic granulate and regrind on an extrusion line, and is also described as suitable for trim, chips, wood shavings, grain and similar materials. Supplied fittings include a galvanised inlet reducer, a flanged outlet transition and a base frame. The fan housing has a tapered upper duct connection and a side outlet.
The equipment is used and has been stored. Dust residue, scuffs, paint wear and other surface marks are present. The duct opening is uncovered. The fan has not been tested since removal and is sold as seen; its operating condition has therefore not been confirmed. Please note that the photos show other equipment nearby, including a separate fan marked KONGSKILDE KM 35; this listing describes the MDT 30 ATEX unit.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 10 |
| Last activity | Nov. 18, 2026 |